PS3010R MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.element14.com www.farnell.com www.newark.com Page <1> V1.026/03/13 Fast Diode Features:
- High surge current capability
- 3 Ampere operation at TA = 55°C with no thermal runaway
- Exceeds environmental standards of MIL-S-19500/228
- Fast switching for high efficiency Specifications: Mechanical Data: Case : Moulded plastic. Terminals : Axial leads, solderable per MIL-STD-202, Method 208. Polarity : Band denotes cathode. Mounting position : Any Maximum Ratings and Electrical Characteristics: Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameters PS3010R Units Maximum Recurrent Peak Reverse Voltage 1,000 VMaximum RMS Voltage 700 Maximum DC Blocking Voltage 1,000 Maximum Average Forward Rectified Current 0.375" (9.5mm) Lead Length at TA = 55°C 3 A Peak Forward Surge Current 8.3Ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 200 Maximum Forward Voltage at 3.0A 1.3 V Maximum Reverse Current TJ = 25°C at Rated DC Blocking Voltage TJ = 100°C 500 μA μA Maximum Reverse Recovery Time (Note 1) 500 nS
www.element14.com www.farnell.com www.newark.com Page <2> V1.026/03/13 Fast Diode Notes: 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1A, IRR = 0.25A. 2. Measured at 1MHz and Applied Reverse Voltage of 4V DC. 3. Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length with both leads equally heatsink. Parameters PS3010R Units Typical Junction Capacitance (Note 2) CJ 60 pF Typical Thermal Resistance (Note 3) RθJA 22 °C/W Operating and Storage Temperature Range -55 to +150 °C Notes: 1. Rise Time = 7nS maximum Input Impedance = 1MΩ, 22pF 2. Rise Time = 10nS maximum Source Impedance = 50Ω Figure 1 - Reverse Recovery Time Characteristics and Test Circuit Diagram
www.element14.com www.farnell.com www.newark.com Page <4> V1.026/03/13 Fast Diode Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Part Number Table Description Part Number Diode, Fast, 3A, 1,000V PS3010R Dimensions : Inches (Millimetres)