BC3 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> 07/06/12 V1.1 www.element14.com www.farnell.com www.newark.com Hand-Held (battery compartment) Black Features: BC3 is a small hand held case with the following features:
- No fixing screws visible to spoil the final product
- Total internal area useable 60 × 65 mm
- Smart in appearance
- Movable front panel for ease of manufacture
- Relatively low cost
- Hand-held ABS cases for portable / pocket equipment
- Integral battery compartment to house PP3 battery with removable lid Specification Table Overall Dimensions Colour Part NumberHeight (H) Width (W) Depth (D) 33 118 66 Black BC3 In-Line Power Supply Case Features:
- A power supply style case with an attractive rugged appearance, moulded in black flame retardant ABS
- The case will house EI54, S35 or S147 size transformers and leave space for ancillary components
- The top and base are normally glued together although it is possible to drill the base and use self-tapping screws to hold them together
- Recessed holes designed to accept standard 9 mm self adhesive feet Specification Table Overall Dimensions Type Part NumberWidth (W2) Depth (D) Height (H) Width (W1) 117 63 62 103 Standard PS2 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Dimensions : Millimetres Dimensions : Millimetres