PS2 AICTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Higher ripple though use of low-ESR material consequently, the permissible ripple current is improved by 27% in the windless status or 40% in the ventilated condition (0.5m/s) as compared with conventional constructions (HP3 series).
  • Improvement in air exhaust (flow hole phenomenon) from the terminal insertion hole at solder fixing though improvement of cap condtruction.
  • The operating spase of the safety vent (arranged on the case bottom) is reduced from 5mm (conventional necessary distance) into 1mm through improvement of case construction. For these new case construction, pattern desigh can be move flexible. Product Specifications Product code Terminal permissible current is limited to 15Arms (П41, 46), 20Arms (П51). (Even if calculated the permissible ripple current with the correction coefficient exceeds 15, 20 Arms) Please consult us when the ripple voltage exceeds 70Vp-p. NEW! Ripple current correction coefficient Temperature (ˆ) 4 06 08 5 Correction coefficient 200ʙ500V.DC 1.89 1.51 1.00 550ʙ600V.DC 1.65 1.45 1.00 Frequency (Hz) 50/60 120 300 1K ʾ10K Forced wind (m/s) ʻ0.5 0.5 ʽ Correction coefficient 1.0 1.1 HP3 ˠ PS2 P.84 High-ripple current Items Specifications Temperature range ʵ40ˆʙʴ 85ˆʢ200 ʙ500V.DCʣ ʵ25ˆʙʴ 85ˆʢ550, 600V.DCʣ Rated voltage 200 ʙ 600V.DC Capacitance tolerance ʶ20% ʢ20ˆɼ 120Hzʣ Leakage current 0.01CV (ЖA) or 5mA, whichever is smaller or less ʢ20ˆɼ after 5 minutesʣ ʦC = nominal capacitance (ЖF), V ʹrated voltage (V)ʧ Dissipation factor Less than the value specified in the standard products table. ʢ20ˆɼ 120Hzʣ Permissible ripple current As specified in the standard product table. ʢ85ˆɼ 120Hzʣ Endurance After the rated voltage with specified ripple current is applied at 85ˆ for 2,000 hours : Capacitance change : Within ʶ15% of the initial value measured Dissipation factor : 175% or less than the initial value specified Leakage current : Less than or equal to the initial value specified Shelf life The following specification shall be meet when the capacitor are restored to 20 ˆ after storage of 500 hours at 85ˆ with no voltage applied. Before the measurement, the capacitor shall be preconditioned by applying the voltage treatment according to Item 4.1 of JIS C 5101-4. Capacitance change : Within ʶ15% of the initial value measured Dissipation factor : 175% or less than the initial value specified Leakage current : Less than or equal to the initial value specified Others J ᶗS C 5101-4

SNAP MOUNT TYPE ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Dimensions PS2 Series Standard Products Table Rated Voltage (V. DC) Capacitance (ЖF) Case size ПDʷL (mm) tanb 20ˆ, 120Hz Ripple current (Arms) 85ˆ, 120Hz ESR(typ.) (m1) 20ˆ, 100Hz Product name 200 1,800 41 ʷ45 0.15 5.78 63 PS22D182MSBS6PHWPPF 2,200 41 ʷ55 0.15 6.35 52 PS22D222MSBS8PHWPPF 2,700 46 ʷ51 0.15 6.58 42 PS22D272MSHS7PHWPPF 3,300 41ʷ64 0.15 7.46 34 PS22D332MSBS10PHWPPF 46ʷ61 0.15 7.35 34 PS22D332MSHS9PHWPPF 51ʷ51 0.15 7.07 35 PS22D332MTCS7PHWPPF 3,900 46ʷ70 0.15 7.98 30 PS22D392MSHS11PHWPPF 51ʷ61 0.15 7.76 30 PS22D392MTCS9PHWPPF 4,700 51 ʷ70 0.15 8.49 25 PS22D472MTCS11PHWPPF 250 1,200 41 ʷ45 0.15 4.72 95 PS22E122MSBS6PHWPPF 1,800 41ʷ55 0.15 5.75 63 PS22E182MSBS8PHWPPF 46ʷ51 0.15 5.37 63 PS22E182MSHS7PHWPPF 2,200 41ʷ64 0.15 6.41 52 PS22E222MSBS10PHWPPF 46ʷ61 0.15 6.00 52 PS22E222MSHS9PHWPPF 2,700 51 ʷ51 0.15 6.40 43 PS22E272MTCS7PHWPPF 3,300 46ʷ70 0.15 7.34 34 PS22E332MSHS11PHWPPF 51ʷ61 0.15 7.14 34 PS22E332MTCS9PHWPPF 3,900 51 ʷ70 0.15 7.73 30 PS22E392MTCS11PHWPPF 400 560 41 ʷ45 0.15 4.22 132 PS22G561MSBS6PHWPPF 680 41 ʷ55 0.15 4.62 109 PS22G681MSBS8PHWPPF 820 46 ʷ51 0.15 5.13 90 PS22G821MSHS7PHWPPF 1,000 41ʷ64 0.15 5.66 80 PS22G102MSBS10PHWPPF 46ʷ61 0.15 5.73 80 PS22G102MSHS9PHWPPF 51ʷ51 0.15 5.88 80 PS22G102MTCS7PHWPPF 1,200 46ʷ70 0.15 6.26 66 PS22G122MSHS11PHWPPF 51ʷ61 0.15 6.51 66 PS22G122MTCS9PHWPPF 1,500 51 ʷ70 0.15 7.25 53 PS22G152MTCS11PHWPPF 420 470 41 ʷ45 0.15 3.71 158 PS2420V471MSBS6PHWPPF 680 41ʷ55 0.15 4.44 109 PS2420V681MSBS8PHWPPF 46ʷ51 0.15 4.48 109 PS2420V681MSHS7PHWPPF 820 41ʷ64 0.15 4.92 90 PS2420V821MSBS10PHWPPF 51ʷ51 0.15 5.11 90 PS2420V821MTCS7PHWPPF 1,000 46 ʷ61 0.15 5.49 80 PS2420V102MSHS9PHWPPF 1,200 46ʷ70 0.15 6.01 66 PS2420V122MSHS11PHWPPF 51ʷ61 0.15 6.25 66 PS2420V122MTCS9PHWPPF 1,500 51 ʷ70 0.15 6.96 53 PS2420V152MTCS11PHWPPF Rated Voltage (V. DC) Capacitance (ЖF) Case size ПDʷL (mm) tanb 20ˆ, 120Hz Ripple current (Arms) 85ˆ, 120Hz ESR(typ.) (m1) 20ˆ, 100Hz Product name 450 390 41 ʷ45 0.15 3.38 190 PS22W391MSBS6PHWPPF 560 41 ʷ55 0.15 4.03 132 PS22W561MSBS8PHWPPF 680 46 ʷ51 0.15 4.48 109 PS22W681MSHS7PHWPPF 820 41ʷ64 0.15 4.92 90 PS22W821MSBS10PHWPPF 46ʷ61 0.15 4.98 90 PS22W821MSHS9PHWPPF 51ʷ51 0.15 5.11 90 PS22W821MTCS7PHWPPF 1,000 46ʷ70 0.15 5.48 80 PS22W102MSHS11PHWPPF 51ʷ61 0.15 5.70 80 PS22W102MTCS9PHWPPF 1,200 51 ʷ70 0.15 6.22 66 PS22W122MTCS11PHWPPF 500 330 41 ʷ45 0.20 2.96 290 PS22H331MSBS6PHWPPF 470 41ʷ55 0.20 3.51 210 PS22H471MSBS8PHWPPF 46ʷ51 0.20 3.54 210 PS22H471MSHS7PHWPPF 560 41 ʷ64 0.20 3.87 180 PS22H561MSBS10PHWPPF 680 46ʷ61 0.20 4.31 150 PS22H681MSHS9PHWPPF 51ʷ51 0.20 4.43 150 PS22H681MTCS7PHWPPF 820 46ʷ70 0.20 4.72 120 PS22H821MSHS11PHWPPF 51ʷ61 0.20 4.91 120 PS22H821MTCS9PHWPPF 1,000 51 ʷ70 0.20 5.40 100 PS22H102MTCS11PHWPPF 550 220 41 ʷ45 0.20 2.33 510 PS22L221MSBS6PHWPPF 270 41 ʷ55 0.20 2.57 420 PS22L271MSBS8PHWPPF 330 46 ʷ51 0.20 2.87 340 PS22L331MSHS7PHWPPF 390 41ʷ64 0.20 3.12 290 PS22L391MSBS10PHWPPF 46ʷ61 0.20 3.15 290 PS22L391MSHS9PHWPPF 51ʷ51 0.20 3.24 290 PS22L391MTCS7PHWPPF 560 46ʷ70 0.20 3.77 200 PS22L561MSHS11PHWPPF 51ʷ61 0.20 3.92 200 PS22L561MTCS9PHWPPF 680 51 ʷ70 0.20 4.31 170 PS22L681MTCS11PHWPPF 600 180 41 ʷ45 0.20 2.11 620 PS2600V181MSBS6PHWPPF 220 41 ʷ55 0.20 2.32 510 PS2600V221MSBS8PHWPPF 270 46 ʷ51 0.20 2.59 420 PS2600V271MSHS7PHWPPF 330 41 ʷ64 0.20 2.87 340 PS2600V331MSBS10PHWPPF 390 46ʷ61 0.20 3.15 290 PS2600V391MSHS9PHWPPF 51ʷ51 0.20 3.24 290 PS2600V391MTCS7PHWPPF 470 46ʷ70 0.20 3.45 240 PS2600V471MSHS11PHWPPF 51ʷ61 0.20 3.59 240 PS2600V471MTCS9PHWPPF 560 51 ʷ70 0.20 3.91 200 PS2600V561MTCS11PHWPPF ʵUZQFUFSNJOBMʢ5FSNJOBMDPEFɿ4ʣ 5ʵUZQFUFSNJOBMʢ5FSNJOBMDPEFɿ5ʣ ʢUnit : mmʣ ˃ ˃ П%ʶ ."9 П ."9 ʵ1SPKFDUJPOT ʵ1SPKFDUJPOT Terminal Terminal PVC Sleeve ."9 ."9 PVC Sleeve 1IFOPMSFTJO Пʶ 1IFOPMSFTJO ʵʷ ʵʷ 4-П2 hole Circuit board hole dimension ʢunit : mmʣ Blank termination as strengthener Blank termination as strengthener Case vent Plate less ʢUnit : mmʣ Circuit board hole dimension ʢunit : mmʣ Blank termination as strengthener Case vent Plate less BJS NN NN FMFNFOU FMFNFOU DIBTTJT $JSDVJUCPBSE ᶃ*NQSPWFNFOUPGqPXIPMF ᶄ*NQSPWFEWBMWFXPSLJOHEJTUBODF *OKFDUJPO Special structure

SNAP MOUNT TYPE ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Life time graph ɹ Useful life depending on ambient temperature Ta and ripple current operating condition ᶗ versus rated ripple current at 85 ˆɼ 120Hz. Ripple Current of Diminishing Ratioʢᶗ/ᶗr, 85ˆʣ 1,000 10,000 100,000 1,000,000 0 0.5 1 1.5 2 0 0.5 1 1.5 2 Useful life (h) Ta=85ˆ Ta=60ˆ Ta=40ˆ 1,000 10,000 100,000 1,000,000Useful life (h) Ta=85ˆ Ta=60ˆ Ta=40ˆ Ripple Current of Diminishing Ratioʢᶗ/ᶗr, 85ˆʣ Series PS2 200 ʙ500V Series PS2 550ʙ600V