PS12-2400-90-GRY MOBILEMARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com Specifications subject to change without notice (9/2018)
- High gain 12 dBi for point to point and multipoint applications
- Attractive low profile styling can be used for access point or subscriber
- Model covers 2.4 GHz WiFi Directional Antennas, Sector Panels, WiFi 2.4 GHz This Mobile Mark Panel antenna is designed for WiFi 2.4 GHz systems. The PS Series sectorized panel antenna is excellent for deploying point-to-point applications. The antenna uses advanced PCB technology. By designing the antenna specifically for WiFi 2.4 GHz, we’ve made this model much smaller, higher performance and lower cost than most competitor offerings. The PS Series housing is a very attractive grey Polystyrene plastic. Compact in size, 12.5” H x 3” W (32 cm x 7 .6 cm) this antenna will be unobtrusive in any indoor or outdoor environment. The PS12-2400-90 model for WiFi 2.4 GHz is offered in a 90 0 sector in the horizontal beam. The antenna has a 220 vertical beam. The PS Series has an adjustable metal bracket, that allows easy alignment and tilt. The unit can be adjusted down in a vertical axis in a continuous range using a sliding slot. which allows for a 0 o - 45o downtilt. With these full features, an array of antennas can be field assembled to provide a complete omni-cell. Mounts to pipe with up to 2 1/2” (63mm) outside diameter. An optional mounting bracket adapter can be provided for wall mount; allows for both vertical & horizontal adjustment. For maximum reliability and weatherproofing, the antennas are outfitted with an N connector at the back of these models. Custom cable assemblies are available using a variety of cables including low loss LMR-400, low loss-195, and traditional RG-58. Jumper cables are also available, and built to order. Model # Gain Frequency Sector Size PS12-2400-90-GRY 12 dBi 2.4 - 2.485 GHz 90 degrees PN-WMK Optional Wall Mount Adjustable Pole Mount Bracket Optional Wall Mount Bracket Specifications Frequency: 2.4-2.485 GHz Gain: 12 dBi VSWR Max: 2:1 Impedance: 50 Ohm nominal Max Power: 25 watts Beamwidth: 90o Az, 22o El Front to Back Ratio: 25 dB or better Lightning Protection: External recommended Max Wind Velocity: 125 + mph (193 kph) Material: Light Grey Polystyrene radome Temperature: -40 o C to +85o C Dimensions: 12.5” H x 3” W (all models) 32 cm x 7 .6 cm Weight: 1 lb (0.45 kg) Pole Mounting: L-bracket with S.S. U-bolts, continuous adjustment up to 4 5 o downtilt, standard Optional Wall Mounting: Double swivel, vertical (up to 3 0 o downtilt) & horizontal (45o from center, 90o total) adjustment, order separately Connector: Integral N Female PS Series Sector Antenna