6832297 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

■Housing is rotatable after plugging the process connection ■Reading of adjusted values without tool ■Recessed pushbutton and keylock for secure programming ■Permanent indication of pressure (bar, psi, kPa, MPa, misc) ■Peak pressure memory ■Pressure range 0…100 bar rel. Wiring diagram Functional principle The pressure sensors in the PS product series operate with ceramic measuring cells. As a result of the pressure acting on the ceramic substrate, a signal that is proportional to the pressure is generated and processed electronically. The processed signal is available either as a switching or an analog output signal, depending on the sensor type used. Maximum flexibility thanks to a rigid or rotatable sensor body, a variety of thread types, front-flush or dead-space-free pressure membranes and an accuracy of 0.5 % of full scale guarantee a safe connection to the process.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|6 PS100R-503-LUUPN8X-H1141 | 11/07/2023 23-57 | technical changes reserved Technical data Accuracy ± 0.5 % FS BSL Rated operational current 0.2 A Switching frequency ≤ 180 Hz Switching point distance ≥ 0.5 % Switch point: (Min. + 0.005 × range)…100 % of full scale Release point(s) min up to (SP - 0.005 x range) Switching cycles ≥ 100 mil. Analog output Voltage output 0…10 V Load ≥ 2 kΩ Accuracy LHR ± 0.5 % FS BSL IO-Link IO-Link specification V 1.0 Transmission physics corresponds to 3-wire physics (PHY2) Frame type 2.2 Transmission rate COM 2 / 38.4 kbps Process data width 16 bit Measured value information 14 bit Switchpoint information 2 bit Programming FDT / DTM Accuracy ± 0.5 % FS BSL Included in the SIDI GSDML Yes Programming options start/end value analog output; switch/ release point; PNP/NPN; NO/NC contact; hysteresis/window mode; damping; pressure unit; peak pressure memory Mechanical data Housing material Stainless-steel/Plastic, 1.4305 (AISI 303) Process connection 1/4'' NPT-18 male thread Pressure connection material Stainless steel 1.4305 (AISI 303) Pressure transducer material Ceramic Al₂O₃ Sealing material FPM spez. Wrench size pressure connection / coupling nut Max. tightening torque of housing nut 35 Nm Electrical connection Connector, M12 × 1 Protection class IP67 IP69K

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|6 PS100R-503-LUUPN8X-H1141 | 11/07/2023 23-57 | technical changes reserved Technical data Environmental conditions Ambient temperature -40…+80 °C Storage temperature -40…+80 °C Shock resistance 50 g (11 ms) acc. to IEC 68-2-27 Vibration resistance 20 g (9…2000 Hz), according to IEC 68-2-6 EMV EN 61000‐4‐2 ESD:4 kV CD / 8 kV AD EN 61000‐4‐3 HF radiated: 15 V/m EN 61000‐4‐4 Burst: 2 kV EN 61000‐4‐5 Surge: 1000 V, 42 Ohm EN 61000‐4‐6 HF cable bound: 10 V Tests/approvals UL registration number E183243 Reference conditions acc. to IEC 61298-1 Temperature 15…+25 °C Atmospheric pressure 860…1060 hPa abs. Humidity 45…75 % rel. Auxiliary power 24 VDC Display 4-digit 7-segment display, rotatable by 180°, with switch-off function Switching state 2 × LEDs, Yellow Unit display 5 x LEDs green (bar, psi, kPa, MPa, misc) Temperature behaviour Temperature coefficient range TKs ± 0.15 % of full scale/10 K Temperature coefficient zero point TK0 ± 0.15 % of full scale/10 K MTTF 439 years acc. to SN 29500 (Ed. 99) 40 Technical data Type PS100R-503-LUUPN8X-H1141 ID 6832297 Pressure range Pressure type Relative pressure Pressure range 0…100 bar 0…1450.38 psi 0…10 MPa Admissible overpressure ≤ 420 bar Burst pressure ≥ 420 bar Response time < 3 ms

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|6 PS100R-503-LUUPN8X-H1141 | 11/07/2023 23-57 | technical changes reserved Technical data Power supply Operating voltage 18…30 VDC Current consumption ≤ 50 mA Voltage drop at Ie ≤ 2 V Protective measure SELV; PELV according to EN 50178 Short-circuit/reverse polarity protection yes / yes Protection type and class IP67 IP69K / III Outputs Output 1 Switching output or IO-Link mode Output 2 Analog output Switching output Communication protocol IO-Link Output function NO/NC, PNP/NPN Accuracy ± 0.5 % FS BSL Rated operational current 0.2 A Switching frequency ≤ 180 Hz Switching point distance ≥ 0.5 % Switch point: (Min. + 0.005 × range)…100 % of full scale Release point(s) min up to (SP - 0.005 x range) Switching cycles ≥ 100 mil. Analog output Voltage output 0…10 V Load ≥ 2 kΩ Accuracy LHR ± 0.5 % FS BSL IO-Link IO-Link specification V 1.0 Programming FDT / DTM Transmission physics corresponds to 3-wire physics (PHY2) Transmission rate COM 2 / 38.4 kbps Process data width 16 bit Measured value information 14 bit Switchpoint information 2 bit Frame type 2.2 Accuracy ± 0.5 % FS BSL Included in the SIDI GSDML Yes Temperature behaviour Medium temperature -40…+85 °C

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|6 PS100R-503-LUUPN8X-H1141 | 11/07/2023 23-57 | technical changes reserved Technical data Temperature coefficient zero point TK0 ± 0.15 % of full scale/10 K Temperature coefficient range TKs ± 0.15 % of full scale/10 K Environmental conditions Ambient temperature -40…+80 °C Storage temperature -40…+80 °C Vibration resistance 20 g (9…2000 Hz), according to IEC 68-2-6 Shock resistance 50 g (11 ms) acc. to IEC 68-2-27 EMV EN 61000‐4‐2 ESD:4 kV CD / 8 kV AD EN 61000‐4‐3 HF radiated: 15 V/m EN 61000‐4‐4 Burst: 2 kV EN 61000‐4‐5 Surge: 1000 V, 42 Ohm EN 61000‐4‐6 HF cable bound: 10 V Mechanical data Housing material Stainless-steel/Plastic, 1.4305 (AISI 303) Pressure connection material Stainless steel 1.4305 (AISI 303) Pressure transducer material Ceramic Al₂O₃ Sealing material FPM spez. Process connection 1/4'' NPT-18 male thread Wrench size pressure connection / coupling nut Electrical connection Connector, M12 × 1 Max. tightening torque of housing nut 35 Nm Reference conditions acc. to IEC 61298-1 Temperature 15…+25 °C Atmospheric pressure 860…1060 hPa abs. Humidity 45…75 % rel. Auxiliary power 24 VDC Display 4-digit 7-segment display, rotatable by 180°, with switch-off function Switching state 2 × LEDs, Yellow Unit display 5 x LEDs green (bar, psi, kPa, MPa, misc) Programming options start/end value analog output; switch/ release point; PNP/NPN; NO/NC contact; hysteresis/window mode; damping; pressure unit; peak pressure memory Tests/approvals Approvals cULus UL registration number E183243 MTTF 439 years acc. to SN 29500 (Ed. 99) 40

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 6|6 PS100R-503-LUUPN8X-H1141 | 11/07/2023 23-57 | technical changes reserved