PS04LTVA1 EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • Low trigger voltage and clamping voltage delivers enhanced ESD protection of very sensitive ICs
  • Ultra-low capacitance (0.05pF typ.) ideal for high speed data applications
  • Provides ESD protection with fast response time (<1ns) allowing equipment to pass IEC 61000-4-2 level 4 test
  • Single line, bidirectional device for placement flexibility
  • Low profile 0402/1005 design for board space savings
  • Low leakage current (<0.1nA typ.) reduces power consumption
  • RoHS compliant, halogen free and lead free for global acceptance
  • Tested to meet automotive specifications (AEC-Q200) Pb HALOGEN HFFREE

Applications

  • Satellite / digital radio
  • Mobile phones
  • GSM Modules
  • HDTV Equipment
  • A/V Equipment
  • DMB Modules
  • Test and measurement equipment
  • Portable game systems
  • Personal media players Packaging
  • 10,000 pieces in paper tape on 7 inch diameter (178mm) reel. Surface Mount Device
  • Security equipment
  • Broadband network equipment
  • Other RF applications
  • High speed data ports o USB 2.0/3.0 o IEEE 1394 o DVI o High speed ethernet PS04LTVA1 Specifications Performance Characteristics Value Rated voltage 5Vdc typical, 12Vdc maximum Clamping voltage1 25V typical Trigger voltage2 150V typical Capacitance @ 1MHz 0.05pF typical, 0.15pF maximum Attenuation change (0-20GHz) -0.2dB typical Leakage current @ 12Vdc <0.1nA typical ESD Capability 8kV typical 15kV typical ESD pulse withstand - IEC 61000-4-2 Direct Discharge - IEC 61000-4-2 Air Discharge >1000 pulses typical 1. Per IEC61000-4-2, Level 4 waveform (8kV direct, 30A) measured 30nS after initiation of pulse. 2. Trigger measurement made using Transmission Line Pulse (TLP) method. 3. Minor shifting in characteristics may be observed over multiple ESD pulses at very rapid rate. Device Marking PS04LTVA1 ESD Suppressors are marked on the tape and reel packages, not individually. Since the product is bi-directional and symmetrical, no orientation marking is required. Design Consideration The location in the circuit for the PS04LTVA has to be car efully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a “0-stub” pad design (pad directly on the signal/data line and second pad directly on common ground).

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 4083 BU-SB10613 June 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Technical Data 4083 Effective June 2017 PS04LTVA1 ESD suppressor Dimensions - mm (in) 0.40 (0.016) 2.20 (0.087) 0.70 (0.028) Recommended Pad Layout - mm (in) Soldering Recommendations  Compatible with lead and lead-free solder reflow processes  Peak reflow temperatures and durations: - IR Reflow = 260°C max for 10 sec. max - Wave Solder = 260°C max. for 10 sec. max  Recommended IR Reflow Profile: Environmental Specifications:  High Temperature Exposure: MIL-STD-202 Method 108  Temperature Cycling: 1000 Air to Air cycles -40°C to +125°C JESD22 Method JA-104  Moisture Resistance Test: MIL-STD-202 Method 106G, 10 cycles  Biased Humidity: MIL-STD-202 Method 103, 1,000hours +85°C, 85%RH  Thermal Shock: MIL-STD-202, Method 107G Air-to-Air -55°C to +125°C, 10 cycles  Vibration Test and Mechanical Shock Test: MIL-STD-202 Method 204 and Method 213  Resistance to Solvent: MIL-STD-202 Method 215  Operating and Storage Temperature Range: -55°C to +125°C