RSF SEI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

Rev Date: 3/3/2022 1 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Features:

  • Lower-cost alternative to carbon comps and wirewounds
  • Coating meets UL 94V-0
  • Meets solvent test of Mil Standard 202, Method 215
  • Cut and formed product is available on select sizes - contact Stackpole
  • Higher or lower resistance values may be possible - contact Stackpole
  • Flameproof
  • 100% RoHS compliant and lead free without exemption
  • Halogen free
  • REACH compliant Electrical Specifications Mechanical Specifications Maximum Maximum Type/Code Working Overload Voltage (V)(1) Voltage (V) 1% 2% 5% RSF12 0.5 250 400 350 ± 200 0.1 - 150K 0.1 - 75K 0.1 - 510K RSF1 1 350 600 600 ± 200 0.1 - 510K RSF2 2 350 600 600 ± 200 0.1 - 510K RSF3 3 800 1000 750 ± 200 0.1 - 470K 0.1 - 510K 0.1 - 510K RSF5 5 1000 1000 750 ± 200 0.1 - 470K 0.1 - 510K 0.1 - 510K RSMF1 1 350 600 500 ± 200 0.1 - 470K RSMF2 2 350 600 500 ± 200 0.1 - 470K RSMF3 3 500 800 600 ± 200 0.1 - 118K 0.1 - 120K 0.1 - 470K RSMF5 5 1000 1000 750 ± 200 0.1 - 470K 0.1 - 510K 0.1 - 510K Power Rating (W) @ 70ºC Dielectric Withstanding Voltage (V) Ohmic Range(2) (Ω) and ToleranceTCR (ppm/ºC) 0.1 - 100K (2) Contact Stackpole for resistance values outside the specified range 0.1 - 120K 0.1 - 75K 0.1 - 100K (1) Lesser of or maximum working voltage √ P*R UnitBody Length Body Diameter Lead Length (Bulk) Lead Diameter Lead-Tape SpecificationType/Code A B C D RSMF5 RSF5 RSMF12 RSMF1 RSMF2 RSF12 RSF1 RSF2 RSF3 RSMF3

Rev Date: 3/3/2022 2 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Power Derating Curve: Surface Temperature Rise: Performance Characteristics Test Test Method Typical Results Insulation Resistance JIS C5201-1, IEC60115-1, 4.6 ≥ 1G Ω Voltage Proof JIS C5201-1, IEC60115-1, 4.7 ≤ ± (0.5% + 0.05 Ω) No mechanical damage < ± 0.25% Short Time Overload JIS C5201-1, IEC60115-1, 4.13 < ± 0.1% Resistance to Solder Heat JIS C5201-1, IEC60115-1, 4.18 < ± 1.0% Endurance at 70°C JIS C5201-1, IEC60115-1, 4.25.1 < ± 2.0% Robustness of Terminations JIS C5201-1, IEC60115-1, 4.16 < ± 0.10% Damp Heat (Steady state) JIS C5201-1, IEC60115-1, 4.24 < ± 1.5% Rapid Change of Temperature JIS C5201-1, IEC60115-1, 4.19 < ± 0.2% Resistance to Solvents JIS C5201-1, IEC60115-1, 4.29 Pass Intermittent Overload JIS C5201-1, IEC60115-1, 4.39 < ± 0.3% Accidental Overload (Flame resistance) JIS C5201-1, IEC60115-1, 4.26 Pass Operating temperature range is -55ºC to +200ºC (RSF12, RSMF12, RSMF1) -55ºC to +235ºC (all others) ≤± (5% + 0.05 Ω) ≤± (1% + 0.05 Ω) No damage to component or removal of marking ≤± (2% + 0.05 Ω) No flaming of gauze Test Specification ≥ 1G Ω ≤± (5.0% + 0.05 Ω)

Rev Date: 3/3/2022 3 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Repetitive Pulse Information: If repetitive pulses are applied to resistors, pulse wave form must be less than “pulse limiting voltage”, “pulse limiting current” or “pulse limiting wattage” calculated by the formula below. Where: Vp: Pulse limiting voltage (V) lp: Pulse limiting current (A) Pp: Pulse limiting wattage (W) P: Power rating (W) R: Nominal resistance (ohm) T: Repetitive period (sec) t: Pulse duration (sec) K: Coefficient: 0.8 [Vr: Rated Voltage (V), Ir: Rated Current (A)] Note 1: If T > 10 → T = 10 (sec), T / t > 1000 → T / t = 1000 Note 2: If T > 10 and T / t > 1000, “Pulse Limiting power (Single pulse) is applied Note 3: If Vp < Vr (lp < lr or Pp < P), Vr (lr, P) is Vp (lp, Pp) Note 4: Pulse limiting voltage (current, wattage) is applied at less than rated ambient temperature. If ambient temperature is more than the rated temperature (70 °C), decrease power rating according to “Power Derating Curve” Note 5: Assure sufficient margin for use period and conditions for “pulse limiting voltage” Note 6: If the pulse waveform is not square wave, judge after transform the waveform into square wave according to the “Waveform Transformation to Square Wave”. Vp = K√P x R x T/t lp = K√P/R x T/t Pp = K2 x P x T/t

Rev Date: 3/3/2022 4 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Waveform Transformation to Square Wave 1. Discharge curve wave with time constant “t” → Square wave 2. Damping oscillation wave with time constant of envelope “t” → Square wave 3. Half-wave rectification wave → Square wave 4. Triangular wave → Square wave 5. Special wave → Square wave

Rev Date: 3/3/2022 5 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Recommended Solder Profile This information is intended as a reference for solder profiles for Stackpole resistive components. These profiles should be compatible with most soldering processes. These are only recommendations. Actual numbers will depend on board density, geometry, packages used, etc., especially those cells labeled with “*”. 100% Matte Tin / RoHS Compliant Terminations Soldering iron recommended temperatures: 330°C to 350°C with minimum duration. Maximum number of reflow cycles: 3. Wave Soldering Description Maximum Recommended Minimum Preheat Time 80 seconds 70 seconds 60 seconds Temperature Diff. 140°C 120°C 100°C Solder Temp. 260°C 250°C 240°C Dwell Time at Max. 10 seconds 5 seconds * Ramp DN (°C/sec) N/A N/A N/A Temperature Diff. = Defference between final preheat stage and soldering stage. Convection IR Reflow Description Maximum Recommended Minimum Ramp Up (°C/sec) 3°C/sec 2°C/sec * Dwell Time > 217°C 150 seconds 90 seconds 60 seconds Solder Temp. 260°C 245°C * Dwell Time at Max. 30 seconds 15 seconds 10 seconds Ramp DN (°C/sec) 6°C/sec 3°C/sec * Recommended Lead Free Resistor Reflow Profile

Rev Date: 3/3/2022 6 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Reeled in accordance with EIA-296-F Reel Packaging Specifications This is a non-critical dimension that does not have a tolerance in the standard. (1) (2) Dimension "E": Reference value only. The "A" dimension shall be governed by the overall length of the taped component. The given dimension "D" expresses the standard width spacing. A 26 mm narrow spacing is available as option "N" packaging code. Ammo Packaging Specifications Type/Code A max.(1) B max Tape Unit Type/Code A max.(1) B max Tape Unit RSMF3 RSMF5 C D(2) RSF12 RSF1 RSF2 RSF3 RSF5 C D(2) RSMF12 RSMF1 RSMF2 Type/Code Size Unit 3.346 ± 0.079 3.543 ± 0.118 inches 85.00 ± 2.00 90.00 ± 3.00 mm 2.953 ± 0.079 2.756 ± 0.118 inches 75.00 ± 2.00 70.00 ± 3.00 mm 2.953 ± 0.079 2.756 ± 0.118 inches 75.00 ± 2.00 70.00 ± 3.00 mm 2.953 ± 0.079 2.756 ± 0.118 inches 75.00 ± 2.00 70.00 ± 3.00 mm RSF 1 A B C RSF 2 RSMF 3 RSMF 2 RSMF 1

Rev Date: 3/3/2022 7 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Pana-Sert Packaging Specifications Symbol Description 0.157 0.217 4.00 5.50 0.394 0.492 10.00 12.50 0.571 0.709 14.50 18.00 0.028 ± 0.004 0.028 ± 0.004 PRSM12 PRSF1 / PRSM2 ØD Body diameter max. max. max. max. max. max. max. max. A Body length max. max. max. max. P1 Feed hole center to lead P0 Feed hole pitch Ød Lead diameter P Component pitch A0 Mounting height Δg Component alignment Alpha Performing angle Δh Component alignment F Lead-lead distance P2 Feed hole center to body W2 Hold down tape position W1 Hole position W0 Hold down tape width W Tape width 0.500 ± 0.012 12.70 ± 0.30 0.500 12.70 0.039 1.00 0.250 ± 0.016 6.35 ± 0.40 0.152 ± 0.020 3.85 ± 0.50 0.354 ± 0.000 ± 0.118 0.00 ± 3.00 12.50 min. min. 0.020 9.00 ± 0.50 0.200 5.08 +0.60 / -0.20 +0.24 / -0.008 45° max 0.000 ± 0.079 0.00 ± 2.00 0.079 2.00 +0 / -0.059 +0 / -1.50 0.492

Rev Date: 3/3/2022 8 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions Pulse Limiting Power (one pulse) / RSMF Series ≤ 5Ω Pulse Limiting Power (one pulse) / RSMF Series ≥ 5Ω Packaging Specifications – Pana-Sert (cont.) Symbol Description H Distance to tape center L Length of shipped lead i Total tape thickness ØD0 Feed hole diamenter I Lead wire portrait H0 Lead wire clinch height 0.748 ± 0.039 19.00 ± 1.00 PRSM12 PRSF1 / PRSM2 0.157 ± 0.008 0.630 ± 0.020 16.00 ± 0.50 0.70 max. 0.433 max. 11.00 max. 0.039 max. 1.00 max. 0.028 max. 4.00 ± 0.20

Rev Date: 3/3/2022 9 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RSF / RSMF Series General Purpose Metal Oxide Resistor Stackpole Electronics, Inc. Resistive Product Solutions 1 2 3 4 5 6 7 8 9 10 11 R S F 1 2 J T R 4 7 0 RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the v arious regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability o f our compliant components. All our stand ard part numbers are compliant to EU Directive 2011 /65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we s upply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/ EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order RoHS Compliance Status RSF General Purpose Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 100% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) RSMF Mini-Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 100% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) Standard Product Series

Description

RSF Metal Oxide Size W Code Tol Value Code Description Size Quantity RSMF Mini 12 0.5 F 1% E96 RSMF12, PRSM12 5000 PRSF Panasert 1 1 G 2% PRSM Panasert Mini 2 2 J 5% 3 3 PRSF1, PRSM2 2000 0.22 ohm = R220 5 5 RSF2, RSMF3 1000 33.2 ohm = 33R2 RSF3, RSMF5 1000 10.2 Kohm = 10K2 T Tape and Reel RSF5 500 1 Mohm = 1M00 RSMF12 5000 RSF12; RSMF1, PRSM12 2000 RSF3, RSF5, RSMF5 500 B Bulk All Sizes 1000 Ammo RSF1, RSF2, RSMF2, PRSF1, PRSM2, RSMF3 Power Rating E24 RSF12, RSF1 RSMF1, RSMF2 Four characters with the multiplier used as the decimal holder. Product Series Tolerance 1000 T Tape and Reel 2500 Packaging A