PRSB68C PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

PRSB6.8C 05224.R3 9/05 www.protekdevices.com STANDARD TVS COMPONENTS Only One Name Means ProTek’Tion™

APPLICATIONS

✔ Noise Suppression for Data Lines ✔ Laptop Computers ✔ Cellular Phones ✔ Digital Cameras ✔ Personal Digital Assistants (PDAs) IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV

FEATURES

✔ 10 Watts Peak Pulse Power per Line (tp = 10/1000µs) ✔ ESD Protection > 40 kilovolts ✔ Bidirectional Configuration ✔ Protects One Data Line ✔ Low Clamping Voltage ✔ Easy Placement for Manufacturing ✔ LOW CAPACITANCE ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ DFN-2 Package ✔ Weight 0.73 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Part Number on Reel & Marking Code on Device 05224 PIN CONFIGURATION

www.protekdevices.com 05224.R3 9/05 PRSB6.8C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS PARAMETER Peak Pulse Power (tp = 10/1000µs) - See Figure 1 W PPk Power Dissipation mW 150 P Junction Temperature 150 TJ Storage Temperature -55 to 150 Tstg Operation Temperature -50 to 150 Topr ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS TYPICAL CAPACITANCE 0V @ 1 MHz C pF PRSB6.8C A 5.7 MAXIMUM LEAKAGE CURRENT @3.5V ID µA 1.0 RATED STAND-OFF VOLTAGE VWM VOLTS 4.7

www.protekdevices.com 05224.R3 9/05 PRSB6.8C 0 5 10 15 20 25 30 t - Time - µs 100 120 IPP - Peak Pulse Current - % of IPP TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs tf Peak Value IPP e-t FIGURE 2 PULSE WAVE FORM IPP/2 td = t GRAPHS 0.1 1 10 100 1,000 10,000 100,000 td - Pulse Duration - µs 100 1,000 PPP - Peak Pulse Power - kilowatts FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10W 10/1000µs Waveform FIGURE 3 OVERSHOOT & CLAMPING VOLTAGE ESD Test Pulse: 25 kilovolt, 1/30ns (waveshape)

5 Volts per Division

www.protekdevices.com 05224.R3 9/05 PRSB6.8C

APPLICATION INFORMATION

t 25°C to Peak 30-60 seconds Temperature - °C TP 155° 140° 0.275mm Round Non-Solder Mask Defined Pads 0.325mm Round 0.150mm 0.330mm Round No Clean OSP(Entek Cu Plus 106A) ±50µm ±20µm

60 Seconds

270°C Pad Size on PCB Pad Shape Pad Definition Solder Mask Opening Solder Stencil Thickness Solder Stencil Aperture Opening (laser cut, 5% tapered walls) Solder Paste Type Pad Protective Finish Tolerance - Edge To Corner Ball Solder Ball Side Coplanarity Maximum Dwell Time Above Liquidous (183°C) Soldering Maximum Temperature PRINTED CIRCUIT BOARD RECOMMENDATIONS PARAMETER VALUE REQUIREMENTS Temperature: TP for Lead-Free (SnAgCu): 260-265°C TP for Tin-Lead: 240-245°C Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area & plating. RECOMMENDED NON-SOLDER MASK DEFINED PAD ILLUSTRATION Non-Solder Mask Defined Pad 0.275mm DIA. Solder Mask Opening 0.325mm DIA. Solder Stencil Opening 0.330mm DIA.

www.protekdevices.com 05224.R3 9/05 PRSB6.8C PACKAGE OUTLINE & DIMENSIONS NOTES 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad : ± 0.003” (±0.08mm). PACKAGE OUTLINE MOUNTING PAD DIM MILLIMETERS INCHES PACKAGE DIMENSIONS A B C D E F H 0.023 0.038 0.018 0.010 0.012 0.010 0.011 DIM MILLIMETERS INCHES PAD DIMENSIONS A B C E F 0.762 ± 0.025 0.356 ± 0.025 0.381 ± 0.025 1.473 ± 0.050 0.559 ± 0.025 0.030 ± 0.001 0.014 ± 0.001 0.015 ± 0.001 0.058 ± 0.002 0.022 ± 0.001 Outline & Dimensions: Rev 0 - 4/05, 06059 TAPE & REEL ORIENTATION NOTE 1. Top view of tape. Solder PADS face down in tape package. MIN NOR MAX 0.024 0.040 0.020 0.012 0.014 0.012 0.012 0.025 0.042 0.022 0.014 0.016 0.014 0.013 0.58 0.97 0.46 0.25 0.30 0.25 0.28 0.61 1.02 0.51 0.30 0.36 0.30 0.30 0.64 1.07 0.56 0.36 0.41 0.36 0.33 MIN NOR MAX A F Solder Print Diameter 0.010” - 0.012” B C E Tape & Reel Specifications (Dimensions in millimeters) D E tmax F W 1.50 ± 0.10 P 2.00 ±0.10 0.25 Reel Dia. Tape Width 8mm 0.80± 0.10 1.20± 0.10 0.70 ± 0.10 A TOP BOTTOM SIDE H C D F E B TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com