PRO3000F60-KIT FLUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Pro3000™ Tone and Probe FamilyPage 1 of 6 DATASHEET
Pro3000 Analog Tone Generator and SmartTone™Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change thecadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone™ provides five distincttones for exact pair identification. Tone Generator features:SmartTone™Send tone signal up to 10 miles on most cablesLine cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adaptersExternal switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDsContinuity TestingLine polarity confirmationPro3000F Filtered Probe features:Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interferenceSwitch between filtered and unfiltered modes with one button press.Tone and trace wire on non-active networksAuto-off capability extends battery lifeLoud probe speaker is audible in noisy locations Pro3000™ Tone and Probe FamilyPage 2 of 6 DATASHEET
Pro3000 Unfiltered ProbeFor technicians that do not require a filtered probe, there is the original Pro3000 Probe. The ergonomic sleek design is easy to handle and use. Like thePro3000F Filtered probe, the Pro3000 Unfiltered Probe features a loud speaker to hear tone clearly through walls, enclosures and in loud environments. Therecessed on/off button helps prevent the probe from accidently being turned on when stored. SpecificationsPro 3000 Toner SpecificationsUser InterfaceSlide Switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT, or OFF Tone mode LEDContinuity/Polarity LEDSolid Frequency1000 Hz nominalAlternating Frequency1000/1500 Hz nominalOver Voltage Protection/td>60 Vdc in Toner/Polarity ModeOutput Power in Tone Mode8 dbm into 600 ohmsOutput Voltage Level in ContinuityPro3000™ Tone and Probe FamilyPage 3 of 6 DATASHEET
FeaturePro3000 Analog Toneand ProbePro3000F60-KITPro3000F50-KITIntellitone Pro 200 (MT-8200-60-KIT)Analog Signal tracingX X X XDigital Signal tracing XSmartTone™X X X XUsed on Inactive NetworksX X X XPro3000™ Tone and Probe FamilyPage 4 of 6 DATASHEET
Used on Active Networks XFrequency Filter 60 Hz50 Hz 3.5 mm JackX X X Replacable TipX X X Auto-Off X (Probe - 5 minutes)X (Probe - 5 minutes)X (Toner= 2.5 hours, Probe= 1 hour)Wiremap XSignal Strength Indicator X ModelDescriptionPro3000F60Pro3000F Filtered Probe (60 Hz)PRO3000F60-KITPro3000F Filtered Probe (60 Hz) and Tone Generator KitPro3000F50Pro3000F Filtered Probe (50 Hz)PRO3000F50-KITPro3000F Filtered Probe (50 Hz) and Tone Generator Kit26200900Pro3000 Tone Generator26000900Pro3000 Analog Tone and Unfiltered Probe Kit26100900Pro3000 Unfiltered Probe26100103Replacement tip for PRO3000F60, PRO3000F50, and Unfiltered Pro3000 Probes About Fluke Networks Pro3000™ Tone and Probe FamilyPage 5 of 6 DATASHEET
Pro3000™ Tone and Probe FamilyPage 6 of 6 DATASHEET