PRM0

MPPRM03WJW20JB00 MULTICOMP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

Page <1> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Type Power Rating Resistance tolerance Nominal Resistance PRM0 5W J 47Ω Ratings: Type Rated Power at 70°C Max. Working Voltage Max. Overload Voltage Resistance Range Operating Temp. RangeWire-wound Power Film PRM0

500 V 1,000 V

0.1Ω ~ 39Ω 28Ω ~ 33KΩ -55°C to +155°C 3W 0.1Ω ~ 47Ω 40Ω ~ 56KΩ 5W 0.1Ω ~ 680Ω 48Ω ~ 100KΩ 7W 0.1Ω ~ 910Ω 681Ω ~ 200KΩ 10W 0.1Ω ~ 27Ω 911Ω ~ 200KΩ Power rating: Resistors shall have a power rating based on continuous full load operation at an ambient temperature of 70°C. Voltage rating: Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercialline frequency and waveform corresponding to the power rating, as determined from the following formula : RCWV = √P x R Note : Max. Working Voltage or √P x R whichever is lesser Max. Overload Voltage or 2.5 √P x R whichever is lesser Where : RCWV = Rated DC or RMS AC continuous working voltage at commercial-line frequency and waveform (volt) P = Power Rating (watt) R = Nominal Resistance (ohm) Heat Rise Chart

Page <2> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Construction No. Name Material Material Generic Name

1 Body Rod Type Ceramics Al2O3, SiO2

2 End Cap Tin plated iron surface Tin : 5%, Iron : 95%

3 Lead Annealed copper wire Tin-Plated Copper wire

4 Ceramic Case Ceramic Al2O3, SiO2

5 Resistance wire Cu-Ni Alloy / Ni-Cr Alloy Metal Oxide Film Cu-Ni Alloy / Ni-Cr Alloy Metal Oxide Film

6 Resistance Film Quartz mixed sand SiO2

Page <3> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Specifications Characteristics Limits Test Methods (JIS C 5201-1) Dielectric withstanding voltage No evidence of flashover, mechanical damage, arcing or insulation break down Resistors shall be clamped in the trough of a 90° metallic V-block and shall be tested at AC potential respectively for 60 +10/ -0 secs. (Sub-clause 4.7) Temperature coefficient <20Ω : ± 400 PPM/°C ≥20Ω : ± 350 PPM/°C Natural resistance change per temp. degree centigrade. R2-R1 × 106 (PPM/°C) R1(t2-t1) R1: Resistance value at room temperature (t1) R2: Resistance value at room temp. plus 100°C (t2) (Sub-clause 4.8) Short time overload Resistance change rate is ± (5% + 0.05Ω) Max. with no evidence of mechanical damage Permanent resistance change after the application of a potential of 2.5 times RCWV or Max Overload Voltage whichever is lesser for 5 sec. (Sub-clause 4.13) Terminal strength No evidence of mechanical damage Direct load : Resistance to a 2.5 kgs direct load for 10 secs. in the direction of the longitudinal axis of the terminal leads Twist test : Terminal leads shall be bent through 90° at a point of about 6mm from the body of the resistor and shall be rotated through 360° about the original axis of the bent terminal in alternating direction for a total of 3 rotations (Sub-clause 4.16) Solderability 95 % coverage Min. The area covered with a new, smooth, clean, shiny and continuous surface free from concentrated pinholes. Test temp. of solder : 245°C ± 5°C Dwell time in solder : 2 to 3 seconds (Sub-clause 4.17) Soldering temp. reference Electrical characteristics shall be satisfied. Without distinct deformation in appearance. (95 % coverage Min.) The leads immersed into solder bath to 3.2 to 4.8 mm. from the body. Permanent resistance change shall be checked. Wave soldering condition: (2 cycles Max.) Pre-heat : 100 ~ 120°C, 30 ± 5 sec. Suggestion solder temp.: 235 ~ 255°C, 10 sec. (Max.) Peak temp.: 260°C Hand soldering condition: Hand Soldering bit temp. : 380 ± 10°C Dwell time in solder : 3 +1/-0 sec. Resistance to soldering heat Resistance change rate is ± (1% + 0.05Ω) Max. with no evidence of mechanical damage. Permanent resistance change when leads immersed to 3.2 to 4.8 mm from the body in 350°C ± 10°C solder for 3 ± 0.5 seconds. (Sub-clause 4.18)

Page <4> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Characteristics Limits Test Methods (JIS C 5201-1) Temperature cycling Resistance change rate is ± (2% + 0.05Ω) Max. with no evidence of mechanical damage Resistance change after continuous 5 cycles for duty shown below: Step Temperature Time 1 -55°C ± 3°C 30 mins 2 Room temp. 10 to 15 mins 3 +155°C ± 2°C 30 mins 4 Room temp. 10 to 15 mins (Sub-clause 4.19) Load life in humidity Resistance value ΔR/R Wire-wound ±5% Power film: <100KΩ ±5% ≥100KΩ ±10% Resistance change after 1,000 hours operating at RCWV with duty cycle of (1.5 hours “on”, 0.5 hour “off”) in a humidity test chamber controlled at 40°C ± 2°C and 90 to 95 % relative humidity (Sub-clause 4.24.2.1) Load life Resistance value ΔR/R Wire-wound ±5% Power film: <100KΩ ±5% ≥100KΩ ±10% Permanent resistance change after 1,000 hours operating at RCWV with duty cycle of (1.5 hours “on”, 0.5 hour “off”) at 70°C ± 2°C ambient (Sub-clause 4.25.1) Dimension Type Rating Wattage W ± 1 D ± 1 L ± 1 d ± 0.05 P ± 1 PRM0 3W 12.5 8.5 25 0.75 55 W 13 9 25 10W 13 9 50 Dimensions : Millimetres PRM 7W, 10W : Lead not centered PRM 2W, 3W, 5W : Lead centered

Page <5> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Description Part Number Cement Resistor, Wire Wound Type, 5W, 5%, 10R MPPRM05WJW100B00 Cement Resistor, Wire Wound Type, 5W, 5%, 47R MPPRM05WJW470B00 Cement Resistor, Wire Wound Type, 10W, 5%, 150R MPPRM0AWJW151B00 Cement Resistor, Wire Wound Type, 5W, 5%, 8.2R MPPRM05WJW82JB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.47R MPPRM05WJW47KB00 Cement Resistor, Wire Wound Type, 5W, 5%, 4.7R MPPRM05WJW47JB00 Cement Resistor, Wire Wound Type, 10W, 5%, 15R MPPRM0AWJW150B00 Cement Resistor, Wire Wound Type, 5W, 5%, 15R MPPRM05WJW150B00 Cement Resistor, Wire Wound Type, 5W, 5%, 43R MPPRM05WJW430B00 Cement Resistor, Wire Wound Type, 10W, 5%, 33R MPPRM0AWJW330B00 Cement Resistor, Wire Wound Type, 5W, 5%, 20R MPPRM05WJW200B00 Cement Resistor, Wire Wound Type, 5W, 5%, 1.5R MPPRM05WJW15JB00 Cement Resistor, Wire Wound Type, 5W, 5%, 1R MPPRM05WJW10JB00 Cement Resistor, Power Film Type, 10W, 5%, 10K MPPRM0AWJP103B00 Cement Resistor, Power Film Type, 5W, 5%, 10K MPPRM05WJP103B00 Cement Resistor, Power Film Type, 5W, 5%, 150R MPPRM05WJP151B00 Cement Resistor, Power Film Type, 5W, 5%, 1K MPPRM05WJP102B00 Cement Resistor, Power Film Type, 5W, 5%, 4.7K MPPRM05WJP472B00 Cement Resistor, Power Film Type, 5W, 5%, 330R MPPRM05WJP331B00 Cement Resistor, Power Film Type, 5W, 5%, 560R MPPRM05WJP561B00 Cement Resistor, Power Film Type, 5W, 5%, 68R MPPRM05WJP680B00 Cement Resistor, Wire Wound Type, 5W, 5%, 3.9R MPPRM05WJW39JB00 Cement Resistor, Power Film Type, 5W, 5%, 470R MPPRM05WJP471B00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.1R MPPRM05WJW10KB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.2R MPPRM05WJW20KB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.05R MPPRM05WJW50LB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.33R MPPRM05WJW33KB00 Cement Resistor, Wire Wound Type, 10W, 5%, 10R MPPRM0AWJW100B00 Cement Resistor, Power Film Type, 5W, 5%, 270R MPPRM05WJP271B00 Cement Resistor, Wire Wound Type, 5W, 5%, 3.3R MPPRM05WJW33JB00 Cement Resistor, Wire Wound Type, 10W, 5%, 200R MPPRM0AWJW201B00 Cement Resistor, Wire Wound Type, 10W, 5%, 3R MPPRM0AWJW30JB00 Cement Resistor, Power Film Type, 10W, 5%, 1K MPPRM0AWJP102B00 Cement Resistor, Wire Wound Type, 10W, 5%, 20R MPPRM0AWJW200B00 Cement Resistor, Wire Wound Type, 5W, 5%, 2R MPPRM05WJW20JB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.3R MPPRM05WJW30KB00 Cement Resistor, Wire Wound Type, 5W, 5%, 3R MPPRM05WJW30JB00 Cement Resistor, Power Film Type, 5W, 5%, 300R MPPRM05WJP301B00 Part Number Table

Page <6> V1.010/07/25 Through Hole Cement Resistor Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Description Part Number Cement Resistor, Power Film Type, 5W, 5%, 7.5K MPPRM05WJP752B00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.27R MPPRM05WJW27KB00 Cement Resistor, Wire Wound Type, 5W, 5%, 33R MPPRM05WJW330B00 Cement Resistor, Power Film Type, 5W, 5%, 200R MPPRM05WJP201B00 Cement Resistor, Power Film Type, 5W, 5%, 1.5K MPPRM05WJP152B00 Cement Resistor, Wire Wound Type, 10W, 5%, 0.68R MPPRM0AWJW68KB00 Cement Resistor, Power Film Type, 5W, 5%, 82R MPPRM05WJP820B00 Cement Resistor, Wire Wound Type, 10W, 5%, 6.8R MPPRM0AWJW68JB00 Cement Resistor, Wire Wound Type, 10W, 5%, 30R MPPRM0AWJW300B00 Cement Resistor, Wire Wound Type, 10W, 5%, 100R MPPRM0AWJW101B00 Cement Resistor, Wire Wound Type, 10W, 5%, 0.1R MPPRM0AWJW10KB00 Cement Resistor, Wire Wound Type, 10W, 5%, 4.7R MPPRM0AWJW47JB00 Cement Resistor, Wire Wound Type, 5W, 5%, 39R MPPRM05WJW390B00 Cement Resistor, Wire Wound Type, 5W, 5%, 2.7R MPPRM05WJW27JB00 Cement Resistor, Wire Wound Type, 5W, 5%, 0.68R MPPRM05WJW68KB00 Cement Resistor, Wire Wound Type, 3W, 5%, 2R MPPRM03WJW20JB00 Cement Resistor, Power Film Type, 5W, 5%, 3.3K MPPRM05WJP332B00 Cement Resistor, Power Film Type, 5W, 5%, 56R MPPRM05WJP560B00 Cement Resistor, Wire Wound Type, 5W, 5%, 7.5R MPPRM05WJW75JB00 Cement Resistor, Power Film Type, 5W, 5%, 75R MPPRM05WJP750B00 Cement Resistor, Power Film Type, 5W, 5%, 3K MPPRM05WJP302B00 Cement Resistor, Wire Wound Type, 3W, 5%, 0.2R MPPRM03WJW20KB00