PRLL4001 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Product specification Supersedes data of November 1993

1996 Jun 10

PRLL4001; PRLL4002 Rectifiers book, halfpage M3D121

1996 Jun 10 2

Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002

FEATURES

  • Glass passivated
  • High maximum operating temperature
  • Low leakage current
  • Excellent stability
  • Shipped in 8 mm embossed tape
  • Smallest surface mount rectifier outline.

DESCRIPTION

Cavity free cylindrical glass package through Implotec (1) technology. (1) Implotec is a trademark of Philips. This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. Fig.1 Simplified outline (SOD87) and symbol. handbook, 4 columns MAM061 ka Marking code PRLL4001: 4001. Marking code PRLL4002: 4002. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VRRM repetitive peak reverse voltage PRLL4001 − 50 V PRLL4002 − 100 V VR continuous reverse voltage PRLL4001 − 50 V PRLL4002 − 100 V IF(AV) average forward current averaged over any 20 ms period; Ttp= 105°C − 1.60 A averaged over any 20 ms period; Tamb =6 5°C; see Fig.2 − 0.68 A IFRM repetitive peak forward current − 10 A IFSM non-repetitive peak forward current half sinewave; 60 Hz − 20 A Tstg storage temperature −65 +175 °C Tj junction temperature −65 +175 °C

1996 Jun 10 3

Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002

ELECTRICAL CHARACTERISTICS

Tj=2 5°C; unless otherwise specified. THERMAL CHARACTERISTICS Note 1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper≥40 µm, see Fig.4. For more information please refer to the“General Part of associated Handbook”. SYMBOL PARAMETER CONDITIONS MAX. UNIT VF forward voltage I F = 1 A; see Fig.3 1.1 V VF(AV) full-cycle average forward voltage IF(AV)= 1 A 0.8 V IR reverse current V R =V Rmax 10 µA VR =V Rmax ; Tamb = 100°C5 0 µA IR(AV) full-cycle average reverse current VR =V RRMmax ; Tamb =7 5°C3 0 µA SYMBOL PARAMETER CONDITIONS VALUE UNIT R th j-tp thermal resistance from junction to tie-point 30 K/W R th j-a thermal resistance from junction to ambient note 1 150 K/W

1996 Jun 10 4

Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 GRAPHICAL DATA Fig.2 Maximum average forward current as a function of ambient temperature. handbook, halfpage 0 200 MBH384 0.5 1.0

100 Tamb (°C)

IF(AV) (A) Fig.3 Forward current as a function of forward voltage; typical values. handbook, halfpage 1.50 0.5 IF (A) 10−1 MBH385

1 VF (V)

(2)(1) (3) (1) Tamb = 100°C. (2) Tamb = 2 0°C. (3) Tamb = −50 °C. Fig.4 Printed-circuit board for surface mounting. Dimensions in mm. MSB213 4.5 2.5 1.25

1996 Jun 10 5

Philips Semiconductors Product specification Rectifiers PRLL4001; PRLL4002 PACKAGE OUTLINE DEFINITIONS LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification. handbook, full pagewidth MBA505 0.3 O 2.05 0.05D = 3.5 0.2 D1 = 1.9 0.1O Dimensions in mm. Fig.5 SOD87.