PRGD24150_10 CRYDOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

  • High current SSR rated to 150A @ 48-660 VAC
  • SCR output for heavy industrial loads
  • AC or DC control
  • Zero-crossin g (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 150A 150A 150A 3-15 VDC PRGD24150 90-140 VAC PRGA24150 PRGA48150 PRGA60150 4-15 VDC PRGD48150 PRGD60150 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1)

Description

Operating Voltage (47-63Hz) [Vrms] 24-280 48-530 48-660 Transient Overvoltage [Vpk] 600 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 5.0 5.0 1.0 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 Maximum Load Current (3) [Arms] 150 150 150 Minimum Load Current [Arms] 0.15 0.15 0.15 Maximum Surge Current (16.6ms) [Apk] 1750 1750 1750 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.15 0.15 0.15 Maximum I2 t for Fusing (8.3 msec) [A2 sec] 12700 12700 12700 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5

INPUT SPECIFICATIONS (1) Description 240 V Models 480 V Models Control Voltage Range 3-15 VDC 4-15 VDC 90-140 Vrms Maximum Turn-On Voltage 3.0 VDC 4.0 VDC 90 Vrms Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 10 Vrms Typical Input Current 15 mA @5 VDC 15 mA @ 5 VDC 10 mA @ 120 VAC Nominal Input Impedance 300 Ohm 300 Ohm 14.1 K Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle 1/2 Cycle 10 Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 109 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 12 oz (340g) Encapsulation Thermally conductive Epoxy Power Terminals: MS Screws Furnished, Mounted Control Terminals: .050 x .020 Square Pins GENERAL NOTES 1) All parameters at 25°C unless otherwise speci fi ed. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sink ing required, for derating curves see page 2. 4) Turn-on ti me for Random turn-on versions is 0.02 msec (DC Control Models)

THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 121710

ANNEX - ENVIROMENTAL INFORMATION