PRC200 CALMIRCO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Suitable for I/O interface cards  Stable resistor-capacitor network  No signal delays  8 EMI/RFI protection lines/package  Saves board space and component cost Product Description CAMD’s PRC200/210 Tapped Filter is specifically designed to suppress EMI/RFI noise at I/O ports of personal computers and engineering workstations, Local Area Network (LAN), Asynchronous Transfer Mode (ATM), Wide Area Network (WAN), and peripheral accessories. This integrated thin film resistor capacitor network is available in miniature surface mount pack- ages which minimizes space and routing problems and improves reliability and yields. Why thin film EMI/RFI filters? EMI/RFI filters are needed to suppress noise at low and high frequencies of the signal. Ferrite beads used for EMI/RFI filtering are bulky and ineffective at low frequencies and have saturation problems at high frequencies. Resistor-capacitor

Applications

 EMI/RFI Filter  Low Pass Filter  LCD Panel Display Filters C1200600 SCHEMATIC CONFIGUARA6TION networks offer the best technical approach for effective EMI/RFI filtering. Conventional thick film-based EMI/RFI filters do not effectively suppress noise at high frequen- cies due to the fact that EMI/RFI filters using thick film technology have high parasitic inductance which becomes the dominant component of the capacitor’s impedance past resonance, and therefore significantly affects high frequency performance of the filter. CAMD’s PRC200/210 Tapped Filter is fabricated on a silicon substrate using advanced thin film technology. These EMI/RFI filters have very low parasitic inductance and suppress EMI/RFI noise at low and high frequencies to well above 1000 MHz. 20 19 18 17 16 15 14 13 12 11 123456789 1 0 NOITAMROFNIGNIREDROTRAPDRADNATS egakcaPr ebmuNtraPgniredrO edoCCRs niPe lytSs ebuTl eeR&epaTg nikraMtraP T074/0510 2C IOST /M074/K051002CRPR /M074/K051002CRPM 074/K051002CRP T101/0520 2C IOST /M101/K052002CRPR /M101/K052002CRPM 101/K052002CRP T181/0520 2C IOST /M181/K052002CRPR /M181/K052002CRPM 181/K052002CRP T102/0520 2C IOST /M102/K052002CRPR /M102/K052002CRPM 102/K052002CRP T122/0720 2C IOST /M122/K072002CRPR /M122/K072002CRPM 122/K072002CRP

©2000 California Micro Devices Corp. All rights reserved. 7/14/2000215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com2 PRC200/210CALIFORNIA MICRO DEVICES SNOITACIFICEPSDRADNATS )R(ecnareloTetulosbA% 01± )C(ecnarelotetulosbA% 02± egnaRerutarepmeTgnitarepOC °07otC°0 rotsiseR/gnitaRrewoP Wm001 erutarepmeTegarotSC °051otC°56- gnitaRrewoPegakcaP. xam,W00.1 NOITAMROFNIGNIREDROTRAPDRADNATS egakcaPr ebmuNtraPgniredrO edoCCRs niPe lytSs ebuTl eeR&epaTg nikraMtraP T005/0040 2C IOST /M005/K004002CRPR /M005/K004002CRPM 005/K004002CRP T033/0740 2C IOST /M033/K074002CRPR /M033/K074002CRPM 033/K074002CRP T101/1010 2C IOST /M101/K101002CRPR /M101/K101002CRPM 101/K101002CRP T074/0510 2P OSQT /M074/K051012CRPR /M074/K051012CRPM 074/K051012CRP T101/0520 2P OSQT /M101/K052012CRPR /M101/K052012CRPM 101/K052012CRP T181/0520 2P OSQT /M181/K052012CRPR /M181/K052012CRPM 181/K052012CRP T102/0520 2P OSQT /M102/K052012CRPR /M102/K052012CRPM 102/K052012CRP T122/0720 2P OSQT /M122/K072012CRPR /M122/K072012CRPM 122/K072012CRP T005/0040 2P OSQT /M005/K004012CRPR /M005/K004012CRPM 005/K004012CRP T033/0740 2P OSQT /M033/K074012CRPR /M033/K074012CRPM 033/K074012CRP T101/1010 2P OSQT /M101/K101012CRPR /M101/K101012CRPM 101/K101012CRP NOITAMROFNIGNIREDROTRAPDRADNATS-NON )elpmaxE(102CRP XXX 1TX XX2 T seireStraPe doCRe cnareloTRe doCCe cnareloTC CIOS-002CRP% 01±-K% 01±-K POSQ-012CRP% 02±-M% 02±-M California Micro Devices can develop a fully customized solution which embodies the configuration shown in this data sheet or modified to suit specific application requirements. A Non-Recurring Engineering (NRE) charge will apply for all fully customized requirements and a minimum order/lot will be required. Please direct your detailed circuit configuration and specification requirements to your local CAMD representative or to the factory for a quotation. SEULAVDRADNATS (R ΩΩΩΩΩ) %01± )fp(C %01± nwodkaerB egatloV )xam( CR edoC *db3@cf 517 4V 651T 074/051z HM622 520 01V 551T 101/052z HM46 520 81V 47T 181/052z HM53 520 02V 46T 102/052z HM23 720 22V 65T 122/072z HM72 040 5V 941T 005/004z HM08 743 3V 922T 033/074z HM301 0010 01V 551T 101/101z HM61 SNOITACIFICEPSDRADNATS-NON )R(ecnareloTetulosbA% 01± )C(ecnareloTetulosbA% 01± SEULAVDRADNATS-NON egnaRecnatsiseR0 1 Ω 001ot Ω egnaRecnaticapaCF p081otFp51 * With 0 source imedance.