PR01_V03 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 20

Technical content

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 1 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Power Metal Film Leaded Resistors

DESCRIPTION

A homogeneous film of metal a lloy is deposited on a high grade ceramic body. After a he lical groove has been cut in the resistive layer, tinned conn ecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The enca psulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.

FEATURES

  • High power in small packages (1 W / 0207 size to 3 W / 0617 size)
  • Defined fusing characteristics
  • Technology: metal film
  • Meets active and pa ssive flammability requirements as defined in IEC 60115-1
  • AEC-Q200 qualified (PR01 and PR02)
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • All general purpose power applications
  • Automotive electronics
  • Lighting ballast Notes (1) R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method. (2) 1 % tolerance is available for Rn-range from 1  upwards. TECHNICAL SPECIFICATIONS DESCRIPTION PR01 PR02 Cu-lead PR02 FeCu-lead PR03 Cu-lead PR03 FeCu-lead DIN size 0207 0411 0411 0617 0617 Resistance range (1) 0.22  to 1 M 0.33  to 1 M 1  to 1 M 0.68  to 1 M 1  to 1 M Temperature coefficient ± 250 ppm/K ± 250 ppm/K ± 250 ppm/K ± 250 ppm/K ± 250 ppm/K Rated dissipation, P70 1  R 1 W 2 W 1.3 W 3 W 2.5 W R < 1  0.6 W 1.2 W - 1.6 W - Thermal resistance (Rth) 135 K/W 75 K/W 115 K/W 60 K/W 75 K/W Operating voltage, Umax. AC/DC 350 V 500 V 500 V 750 V 750 V E-series E24, E96 (± 1 %); E24 (± 5 %) Basic specification IEC 60115-1 Stability after: Endurance test (1000 h, P Damp heat test (56 days) R max.: ± (3 % R + 0.1 ) Soldering (10 s, 260 °C) R max.: ± (1 % R + 0.05 )

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 2 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

APPLICATION INFORMATION

The power dissipation on the re sistor generates a tempe rature rise against the local ambi ent, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. These resistors do not feature a limited lifetime when operated within the permissibl e limits. However, re sistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. The designer may estima te the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired stability. TERMINATION WIRE TYPES PRODUCT TYPE PACKAGING CODE STYL E MATERIAL WIRE DIAMETER PITCH PR01 A1, A5, R5 Axial Cu 0.58 mm n/a N4 Radial Cu 0.58 mm 4.8 mm L1 Radial Cu 0.58 mm 17.8 mm L1 Radial FeCu 0.58 mm 17.8 mm K1 Radial FeCu 0.58 mm 12.5 mm PR02 A1, R5 Axial Cu 0.78 mm n/a A1 Axial FeCu 0.58 mm n/a N3, R2 Radial Cu 0.78 mm 4.8 mm L1 Radial Cu 0.78 mm 17.8 mm L1 Radial FeCu 0.58 mm 17.8 mm B1 Radial FeCu 0.78 mm 15 mm PR03 AC Axial Cu 0.78 mm n/a AC Axial FeCu 0.58 mm n/a DC Radial Cu 0.78 mm 25.4 mm DC Radial FeCu 0.58 mm 25.4 mm PC Radial FeCu 0.78 mm 20 mm OPERATION MODE POWER P Rated dissipation PR01 1 W PR02 2 W PR03 3 W Applied maximum film temperature, F max. 250 °C Max. resistance change at rated dissipation for resistance range: PR01 0.22  to 1 M PR02 0.33  to 1 M PR03 0.68  to 1 M |R/R|max. (at P70) after: 1000 h 5.0 % R + 0.1 

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 3 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. PART NUMBER AND PRODUCT DESCRIPTION Part Number: PR02000201001JA100 TYPE/SIZE VARIANT WIRE TYPES TCR/MATERIAL RESISTANCE TOLERANCE PACKAGING SPECIAL PR0100 PR0200 PR0300 0 = neutral Z = value overflow (special) 1 = Cu 0.58 (PR01) 2 = Cu 0.78 (PR02, PR03) 3 = FeCu 0.58 (PR01, PR02, PR03) 4 = FeCu 0.78 (PR02, PR03) 0 = standard 3 digit value 1 digit multiplier Multiplier 7 = *10 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 F = ± 1 % J = ± 5 % AC DC PC 00 = standard Product Description: PR02 5 % A1 1K0 PR02 5 % A1 1K0 TYPE TOLERANCE PACKAGING RESISTANCE VALUE PR01 PR02 PR03 1 % 5 % AC DC PC 1K0 = 1 k 4K75 = 4.75 k PACKAGING PRODUCT TYPE CODE QUANTITY DESCRIPTION PITCH TAPE WIDTH DIMENSION PR01 A5 5000 Ammo pack acc. to IEC 60286-1 5 mm 52 mm 75 mm x 114 mm x 260 mm A1 1000 Ammo pack acc. to IEC 60286-1 5 mm 52 mm 78 mm x 31 mm x 260 mm N4 4000 Ammo pack acc. to IE C 60286-2 - - 45 mm x 262 mm x 330 mm L1 1000 Loose in bulk - - 105 mm x 70 mm x 205 mm K1 1000 Loose in bulk - - 105 mm x 70 mm x 205 mm R5 5000 Reel pack acc. to IEC 60286-1 5 mm 52 mm 93 mm x 300 mm x 298 mm PR02 A1 1000 Ammo pack acc. to IEC 60286-1 5 mm 52 mm 72 mm x 60 mm x 258 mm N3 3000 Ammo pack acc. to IE C 60286-2 - - 45 mm x 262 mm x 330 mm L1 1000 Loose in bulk - - 105 mm x 70 mm x 205 mm B1 1000 Loose in bulk - - 105 mm x 70 mm x 205 mm R5 5000 Reel pack acc. to IEC 60286-1 5 mm 52 mm 100 mm x 375 mm x 375 mm R2 2000 Reel pack acc. to IEC 60286-2 - - 90 mm x 375 mm x 375 mm PR03 AC 500 Ammo pack acc. to IEC 60286-1 5 mm 63 mm 83 mm x 58 mm x 256 mm DC 500 Loose in bulk - - 105 mm x 70 mm x 205 mm PC 500 Loose in bulk - - 105 mm x 70 mm x 205 mm R02000201P 01JA1 000

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 4 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal al loy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature coefficient. Plated steel termination caps are firmly pressed on the metalized rods. Mostly, a special laser is used to achieve the target value by smoothly cutting a helical groove in the resistiv e layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistor elements are covered by a light blue protective coating designed for electrical, mechanical, and climatic protection. Four or five color code rings designate the resistance value and tolerance in accordance with IEC 60062. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1 or for the radial versions in accordance to IEC 60286-2. MATERIALS Vishay acknowledges the following systems for the regulation of hazardous substances:

  • IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (1)
  • The Global Automotive Declarable Substance List (GADSL) (2)
  • The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (3) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree Hence the products fully comply with the following directives:
  • 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II)
  • 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU
  • 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037 ASSEMBLY The resistors are suitable fo r processing on automatic insertion equipment and cutti ng and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering proc esses. The immunity of the plating against tin whisker growth, in compliance with IEC 60068-2-82, has been proven under extensive testing. The encapsulant is resistant to cleaning solvent specified in IEC 60115-1. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. APPROVALS These resistors meet the safety requirements of:
  • UL1676 (510 k to 11 M); file no: E171160
  • IEC 60065, clause 14.2
  • DIN EN 60065, clause 14.1.a)
  • VDE 0860, clause 14.1.a)
  • CQC, China

RELATED PRODUCTS

For a correlated range of Me tal Film Resistors see the datasheet: “High Ohmic / High Voltage Metal Film Leaded Resistors”, www.vishay.com/doc?30260 For product that offers high power dissipation and metal oxide film technology see the datasheet: “High Power Metal Oxide Leaded Resistors”,  www.vishay.com/doc?20128 Notes (1) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474. (2) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at www.gadsl.org (3) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table.

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 5 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FUNCTIONAL PERFORMANCE The power that the resistor can dissipate depends on the operating temperature. Maximum dissipation (Pmax.) in percentage of rated power as a function of the ambient temperature (Tamb) PR01 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR02 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR01 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR02 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. Ambient Temperature in °C Power in % 05 0 70 100 200 Derating -55 150 100 0 0.4 1.2 0.8 Δ T (K) P (W) 20 mm 25 mm 15 mm Ø 0.58 mm Cu-leads Minimum distance from resistor body to PCB = 1 mm Ø 0.58 mm FeCu-leads Minimum distance from resistor body to PCB = 1 mm 15 mm 20 mm 25 mm Δ T (K) P (W) 20 Ø 0.58 mm FeCu-leads Minimum distance from resistor body to PCB = 1 mm 0 0.4 1.2 0.8 ΔT (K) P (W) 15 mm 20 mm 25 mm Ø 0.78 mm Cu-leads Minimum distance from resistor body to PCB = 1 mm 100 15 mm 20 mm 25 mm ∆ T (K) P (W)0 2

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 6 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR02 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR03 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR03 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. PR03 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting. ΔT (K) P (W) 15 mm 20 mm 25 mm Ø 0.78 mm FeCu-leads Minimum distance from resistor body to PCB = 1 mm Ø 0.78 mm Cu-leads Minimum distance from resistor body to PCB = 1 mm 100 01 3 ∆ T (K) P (W) 15 mm 20 mm 25 mm Ø 0.58 mm FeCu-leads Minimum distance from resistor body to PCB = 1 mm 01 3 2 Δ T (K) P (W) 15 mm 10 mm 20 mm 25 mm Ø 0.78 mm FeCu-leads Minimum distance from resistor body to PCB = 1 mm 0 1.6 3.2 2.40.8 ΔT (K) P (W) 15 mm 20 mm

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 7 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR01 Hot-spot temperature rise (T) as a function of dissipated power. PR01 Hot-spot temperature rise (T) as a function of dissipated power. PR02 Hot-spot temperature rise (T) as a function of dissipated power. PR02 Hot-spot temperature rise (T) as a function of dissipated power. PR02 Hot-spot temperature rise (T) as a function of dissipated power. PR03 Hot-spot temperature rise (T) as a function of dissipated power. P (W) 120 ΔT (K) Ø 0.58 mm Cu-leads ΔT (K) P (W) 0 0.4 0.6 0.2 0.8 120 Ø 0.58 mm FeCu-leads 160 120 Δ T (K) Ø 0.78 mm Cu-leads ΔT (K) P (W) 160 120 Ø 0.78 mm FeCu-leads Δ T (K) P (W) 160 120 Ø 0.58 mm FeCu-leads Δ T (K) P (W) 200 120 160 012 Ø 0.58 mm FeCu-leads

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 8 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR03 Hot-spot temperature rise (T) as a function of dissipated power. PR03 Hot-spot temperature rise (T) as a function of dissipated power. 200 01 3 120 160 ∆ T (K) P (W) Ø 0.78 mm Cu-leads ΔT (K) P (W) 012 200 120 160 Ø 0.78 mm FeCu-leads

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 9 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 The maximum permissible hot-spot temperature is 205 °C for PR01, 220 °C for PR02 and 250 °C for PR03. PR01 Drift nomogram PR02 Drift nomogram PR03 Drift nomogram 1.00 0.75 0.50 0.25 P (W) amb = 40 °C 70 °C 100 °C 125 °C 155 °C 205 °C m (°C) 100 000 h < 1 k Ω 10 000 h 1000 h < 30 k Ω > 30 kΩ T T (W) 2.00 1.50 1.00 0.50 amb = 40 °C 70 °C 100 °C 125 °C 155 °C 220 °C Δ R 100 000 h < 1 k Ω m (°C) < 39 k Ω > 39 k Ω 10 000 h 1000 h P T T m (°C) 3.00 2.25 1.50 0.75 amb = 40 °C 100 °C 125 °C 155 °C 250 °C Δ R 100 000 h > 51 k Ω (W) 70 °C ≤ 51 k Ω < 1 k Ω 10 000 h 1000 h P T T

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 10 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR01 Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) PR01 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti) PR02 Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) 10-110-210-310-410-510-6 10-1 102 103 ti (s) Pmax. (W) 100 200 500 tp ti = 1000/ Pˆ 1200 10-6 10-5 10-4 10-3 10-2 10-1 1 800 1000 600 200 400 Umax. (V) ti(s) 10-5 10-4 10-3 10-2 10-1 1 103 102 Pmax. (W) ti (s)10-610-1 100 p/ i = 1000tt 500 200 Pˆ

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 11 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR02 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti) PR03 Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) PR03 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti) 1700 500 10-6 10-5 10-4 10-3 10-2 10-1 1 1300 1500 1100 700 900 Umax. (V) ti (s) 10-5 10-4 10-3 10-2 10-1 1 103 104 102 Pmax. (W) ti (s)10-6 100 200500 p/ i = 1000tt Pˆ 2400 10-6 10-5 10-4 10-3 10-2 10-1 1 1600 2000 1200 400 800 Umax. (V) ti (s)

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 12 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR01 Time to interruption as a function of overload power for range: 0.22   Rn  1  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. PR01 Time to interruption as a function of overload power for range: 1   Rn  15  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. PR02 Time to interruption as a function of overload power for range: 5   Rn  68  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. PR01 Time to interruption as a function of overload power for range: 16   Rn  560  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. PR02 Time to interruption as a function of overload power for range: 0.33   Rn  5  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. PR02 Time to interruption as a function of overload power for range: 68   Rn  560  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. 102 10-1 5010 4020 30 Poverload (W) t (s) 10 2 10 - 1 50 10 40 20 30 Poverload (W) t (s) 10 2 10-1 100 120 20 80 40 60 Poverload (W) t (s) 10 2 10-1 50 10 40 20 30 Poverload (W) t (s) 10 2 10-1 100 120 20 80 40 60 Poverload (W) t (s) 10 2 10-1 100 120 20 80 40 60 Poverload (W) t (s)

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 13 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR03 Time to interruption as a function of overload power for range: 0.68   Rn  560  This graph is based on measured data under constant voltage conditions; the data may deviate according to the applications. 10 2 10-1 250 50 0 200 100 150 Poverload (W) t (s)

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 14 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR01 Impedance as a function of applied frequency PR02 Impedance as a function of applied frequency PR03 Impedance as a function of applied frequency 10 3 10 2 10 1 10 2 10-1 10 -1 10 -2 Z R f (MHz) n = 24 Ω n = 12 kΩ n = 1 Ω n = 100 kΩ R R R R 10 3 10 2 10 1 10 2 10 -1 10 -1 10 -2 Z R f (MHz) n = 10 Ω n = 22 kΩ n = 1.2 Ω n = 124 kΩ R R R R 103102101 10 2 10 -1 10-2 Z R f (MHz ) = 18 Ωn = 1.3 kΩn = 20 kΩn = 1.5 Ω = 100 kΩn n R R R R R

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 15 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TESTS PROCEDURES AND REQUIREMENTS All tests are carried out in accordance with the following specifications:

  • IEC 60115-1, generic specification (includes tests) The test and requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The tests are carried out in accordance with IEC 60068-2-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT / UCT / 56 (rated temperature range: lower category temperature, upper category temperature; damp heat, steady state, test duration: 56 days) is valid. Unless otherwise specified the following values apply:
  • Temperature: 15 °C to 35 °C
  • Relative humidity: 45 % to 75 %
  • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). For performing some of th e tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31. In test procedures and requirem ents table, only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2- TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) 4.4.1 - Visual examination No holes; clean surface; no damage 4.4.2 - Dimensions (o utline) Gauge (mm) See Straight and Kinked Dimensions tables 4.5 - Resistance ± 5 % R 4.6.1.1 - Insulation resistance Maximum voltage (DC) after 1 min; metal block method R ins min.: 104 M 4.7 - Voltage proof URMS = Uins; 60 s No breakdown or flashover 4.8 - Temperature coefficient and (20 / 155 / 20) °C  ± 250 ppm/K 4.16 21 (Ua1) 21 (Ub) 21 (Uc) Robustness of terminations Tensile, bending, and torsion No damage 4.17 20 (Ta) Solderability +235 °C; 2 s; solder bath method; SnPb40 Good tinning ( 95 % covered, no visible damage) +245 °C; 3 s; solder bath method; SnAg3Cu0.5 Good tinning ( 95 % covered, no visible damage) 4.18.2 20 (Tb) Resistance to soldering heat Unmounted components 4.19 14 (Na) Rapid change of temperature 30 min at -55 °C and 30 min at +200 °C; 5 cycles No visual damage 4.20 29 (Eb) Bump 3 x 1500 bumps in three directions; 40 g No damage 4.22 6 (Fc) Vibration 10 sweep cycles per direction;

10 Hz to 2000 Hz;

1.5 mm or 200 m/s2 No damage

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 16 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4.23 Climatic sequence:

4.23.2 2 (Ba) Dry heat 200 °C; 16 h R ins min.: 103 M 4.23.3 30 (Db) Damp heat, cyclic 55 °C; 24 h; 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) Cold -55 °C; 2 h 4.23.5 13 (M) Low air pressure 8.5 kPa; 2 h; 15 °C to 35 °C 4.23.6 30 (Db) Damp heat, cyclic 55 °C; 5 days; 95 % to 100 % RH; 5 cycles 4.24 78 (Cab) Damp heat (steady state) (93 ± 3 )% RH R 4.25.1 - Endurance (at 70 °C) U = or U = Umax.; 4.26 - Active flammability Accidental overload test No damage, no flamming of gauze cylinder 4.29 45 (Xa) Component solvent resistance Isopropyl alcohol (used in industrial application) +23 °C; toothbrush method Marking legible; no visible damage 4.35 - Passive flammability Needle flame test No ignition of product, no ignition of under layer burning time is less than 30 s TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2- TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) P70 x R

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 17 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS Type with straight leads DIMENSIONS - Straight lead type and relevant physical dimensions; see straight leads outline TYPE Ø DMAX. (mm) L1 MAX. (mm) L2 MAX. (mm) TERMINATION WIRE MATERIAL (Cu OR FeCu) AND WIRE DIAMETER (Ø d) MASS (mg)MATERIAL Ø d (mm) FeCu 0.58 ± 0.05 207 PR02 3.9 10.0 12.0 Cu 0.78 ± 0.05 504 FeCu 0.58 ± 0.05 455 FeCu 0.78 ± 0.05 496 PR03 5.2 16.7 19.5 Cu 0.78 ± 0.05 1192 FeCu 0.58 ± 0.05 1079 FeCu 0.78 ± 0.05 1185 DIMENSIONS - Double kink lead type and relevant physical dimensions; see double kinked outline TYPE Ø DMAX. (mm) L1 MAX. (mm) L2 MAX. (mm) TERMINATION WIRE MATERIAL (Cu OR FeCu) AND WIRE DIAMETER (Ø d) MASS (mg) PITCH (mm) (mm) (mm) (mm) (mm) SMAX. (mm) Ø B (mm) MATERIAL Ø d (mm) PR01 2.5 6.5 8.0 Cu 0.58 ± 0.05 212 17.8 17.8 ± 0.5 17.8 ± 3 1.10 + 0.25 / - 0.20 1.45 ± 0.07 FeCu 0.58 ± 0.05 207 12.5 12.5 ± 0.5 12.5 ± 3 1.10 + 0.25 / - 0.20 1.45 ± 0.07 FeCu 0.58 ± 0.05 207 17.8 17.8 ± 0.5 17.8 ± 3 1.10 + 0.25 / - 0.20 1.45 ± 0.07 PR02 3.9 10.0 12.0 Cu 0.78 ± 0.05 504 17.8 17.8 ± 0.5 17.8 ± 3 1.10 + 0.25 / - 0.20 1.45 ± 0.07 FeCu 0.58 ± 0.05 455 17.8 17.8 ± 0.5 17.8 ± 3 1.10 + 0.25 / - 0.20 1.45 ± 0.07 FeCu 0.78 ± 0.05 496 15.0 15.0 ± 0.5 15.0 ± 3 1.30 + 0.25 / - 0.20 1.65 ± 0.07 PR03 5.2 16.7 19.5 Cu 0.78 ± 0.05 1192 25.4 25.4 ± 0.5 25.4 ± 3 1.10 + 0.25 / - 0.20 1.65 ± 0.07 FeCu 0.58 ± 0.05 1079 25.4 25.4 ± 0.5 25.4 ± 3 1.10 + 0.25 / - 0.20 1.65 ± 0.07 FeCu 0.78 ± 0.05 1185 20 22.0 ± 0.5 20.0 ± 3 1.30 + 0.25 / - 0.20 2.15 ± 0.07 d D Ø D P1 ± 0.5 S Ø B ± 0.07 Ø d b1 4.5 + 1 8 + 2 L1 P2 ± 3 P1 ± 0.5 Type with double kink Dimen sions in millimeters

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 18 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR01, PR02 WITH RADIAL TAPING PR01 - Height for insertion (max.) = 32 mm PR02 - Height for insertion (max.) = 29 mm MARKING The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062, marking codes for resistors and capacitors. PP2 W D0P1P0 L1L F H α = 30° to 40° αα aa DIMENSIONS in millimeters Pitch of components P 12.7 ± 1.0 Feed-hole pitch P 0 12.7 ± 0.2 Feed-hole centre to lead  at topside at the tape P1 3.85 ± 0.5 Feed-hole center to body center P 2 6.35 ± 1.0 Lead spacing F 4.8 +0.7/-0 Width of carrier tape W 18.0 ± 0.5 Minimum hold down tape width W 0 5.5 Height for insertion (max.) H1 32 Lead wire clinch height H 0 16.5 ± 0.5 Body to hole center H 19.5 ± 1 Feed-hole diameter D 0 4.0 ± 0.2 Height for cutting (max.) L 11.0 Minimum lead wire (tape portion) shortest lead L 1 2.5 PP2 W D0P1P0 L1L F H α = 30° to 40° αα aa DIMENSIONS in millimeters Pitch of components P 12.7 ± 1.0 Feed-hole pitch P 0 12.7 ± 0.2 Feed-hole centre to lead  at topside at the tape P1 3.85 ± 0.5 Feed-hole center to body center P 2 6.35 ± 1.0 Lead spacing F 4.8 +0.7/-0 Width of carrier tape W 18.0 ± 0.5 Minimum hold down tape width W 0 5.5 Height for insertion (max.) H1 29 Lead wire clinch height H 0 16.5 ± 0.5 Body to hole center H 19.5 ± 1 Feed-hole diameter D 0 4.0 ± 0.2 Height for cutting (max.) L 11.0 Minimum lead wire (tape portion) shortest lead L 1 2.5

PR01, PR02, PR03 www.vishay.com Vishay BCcomponents Revision: 01-Mar-16 19 Document Number: 28729 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 12NC INFORMATION FOR HISTORICAL CODING REFERENCE The resistors have a 12-digit numeric code starting with 23 For 5 % tolerance:

  • The next 7 digits indicate the resistor type and packing
  • The remaining 3 digits indicate the resistance value: - The first 2 digits indicate the resistance value - The last digit indicates the resistance decade For 1 % tolerance:
  • The next 6 digits indicate the resistor type and packing
  • The remaining 4 digits indicate the resistance value: - The first 3 digits indicate the resistance value - The last digit indicates the resistance decade Last Digit of 12NC Indicating Resistance Decade 12NC Example The 12NC for resistor type PR02 with Cu leads and a value of 750  with 5 % tolerance, supplied on a bandolier of 1000 units in ammopack, is: 2306 198 53751. Notes
  • Preferred types in bold. (1) Other packaging versions are available on request. Notes
  • Preferred types in bold. (2) PR01 pitch 12.5 mm. (3) PR02 pitch 15.0 mm. (4) PR03 pitch 20.0 mm, with reversed kinking direction as opposed to the drawing for the type with double kink figure. RESISTANCE DECADE LAST DIGIT 0.22  to 0.91  7 1  to 9.76  8 10  to 97.6  9 100  to 976  1 1  to 9.76 k 2 10  to 97.6 k 3 100 to 976 k 4

1 M 5

12NC - Resistor Type and Packaging (1) TYPE LEAD Ø mm TOL. (%) AMMOPACK REEL RADIAL TAPED STRAIGHT LEADS RADIAL TAPED52 mm 52 mm 63 mm 52 mm

4000 UNITS 3000 UNITS 5000 UNITS 1000 UNITS 500 UNITS 5000 UNITS 2000 UNITS

12NC - Resistor Type and Packaging TYPE LEAD Ø mm TOL. (%) DOUBLE KINK PITCH = 17.8 mm PITCH = 25.4 mm PITCH (2)(3)(4)

1000 UNITS 500 UNITS 1000 UNITS 500 UNITS

PR01 Cu 0.58 5 22 193 03... - - - PR02 Cu 0.78 5 22 194 23... - - - FeCu 0.58 5 22 194 83... - - - FeCu 0.78 5 - - 22 194 63... (3) - PR03 Cu 0.78 5 - 22 195 23... - - FeCu 0.58 5 - 22 195 83... - - FeCu 0.78 5 - - - 22 195 63... (4)

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.