DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801

  • FEATURE 1. Excellent solder heat resistance(add “C” is for high current type) 2. Low voltage drops and small variations inductance
  • Applications 1. Power line choke coils, etc
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Dimension in m/m TYPE A B C D E F G I H Note1. Measurement frequency of Inductance value : at 1KHz for PQH453226,PQH453226C,PQH575047 100KHz for P QH321618,PQH322520C 1MHz for PQH322516,PQH322520 Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial Note4. Inductance tolerance: K: ±10% ; M: ±20% Note5. Ordering Code: TYPE NAME: PQH322516 Main Inductance: 100 (10uH) Tolerance : M (±20%) Note6. This specification might be changed without notice due to under developing and improving. Thank you for your understanding. C B D A F EE G I H

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 Part No. Inductance(uH) PQH322516 PQH321618 PQH322520 PQH453226 PQH575047 4R2 4.2 821 820 66.10 / 0.005 20.50 / 0.060

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 Part No. Inductance(uH) PQH322520C PQH453226C R12 0.12 R22 0.22 R27 0.27 R47 0.47 1R5 1.5 0.09 / 1.00 4R2 4.2 8R2 8.2 0.392 / 0.400 100 10 0.572 / 0.300 0.24 / 0.65 120 12 0.650 / 0.290 150 15 0.700 / 0.285 0.32 / 0.57 180 18 0.800 / 0.265 220 22 0.923 / 0.250 0.60 / 0.42 330 33 1.352 / 0.230 1.00 / 0.31 390 39 470 47 1.690 / 0.170 1.10 / 0.28 560 56 2.00 / 0.160 1.34 / 0.26 680 68 2.67 / 0.150 1.70 / 0.22 820 82 101 100 4.55 / 0. 100 2.20 / 0.19 151 150 5.80 / 0.095 3.50 / 0.13 181 180 6.27 / 0.090 221 220 10.90 / 0.070 4.00 / 0.11 271 270 331 330 13.00 / 0.060 6.80 / 0.10 391 390 22.10 / 0.060 471 470 24.70 / 0.060 561 560 28.60 / 0.060 681 680 102 1000

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃) , Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH 12. Use components within 6 months. If 6 months or more have elapsed, check soldarability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on