DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FENG-JUI TECHNOLOGY CO., LTD SLIM INDUCTOR-RoHS Your Perfect Inductor Rev.1902 PQH201610T-R TYPE

  • FEATURE 1. Low profile and small size 2. Low DC resistance
  • Applications 1. Cell phone and other portable used
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part Number L(uH) DCR(Ω±20%) I sat(A) typ. Irms(A) typ. PQH201610T-R24□-R 0.24 0.030 4.10 3.90 PQH201610T-R47□-R 0.47 0.042 3.10 3.00 PQH201610T-1R0□-R 1.0 0.079 2.10 2.00 PQH201610T-1R5□-R 1.5 0.140 1.90 1.65 PQH201610T-2R2□-R 2.2 0.180 1.45 1.50 PQH201610T-4R7□-R 4.7 0.400 0.90 0.90 PQH201610T-6R8□-R 6.8 0.500 0.75 0.85 PQH201610T-100□-R 10 0.750 0.70 0.70 PQH201610T-220□-R 22 1.500 0.43 0.30 Note1. Measurement frequency of Inductance value : at 1MHz Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat : △L/L=30%(typ.)(This indicates the value of current when the inductances is 30% typ. lower than its initial value at D.C. superimposition) Note5. Ordering Code: TYPE NAME: PQH201610T, main Inductance: 100 (10uH) Note6. Inductance tolerance: N: ±30% ; M: ±20% Note7. Packaging: Taping ; Quantity: 2000 Pieces/reel Note8. Dimension C for 2 size: under 1R0 is 1.05mm MAX；above 1R0(include) is 1.00mm MAX

FENG-JUI TECHNOLOGY CO., LTD SLIM INDUCTOR-RoHS Your Perfect Inductor Rev.1902 GENERAL CHARACTERISTICS 1. Operating temperature range: - 40 TO + 105 (Includes temperatu re when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After sol dering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No diel ectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000 )x10-6/℃(-25~+80℃ degree Celsius), inductance deviation within±5.0%, after 96 hours. 7. Humidity characteristics(Mo isture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance dev iation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage condition: Temperature Range: 0 ℃ ~ 3 5℃；-40℃ ~ 1 0 5℃ (after PCB) ，Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition