PQDE6W-Q24-S9-D

PQDE6W-D_V01 CUI | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

cui.com date 07/21/2021 page 1 of 6 SERIES: PQDE6W-D │ DESCRIPTION: DC-DC CONVERTER

FEATURES

• industry standard footprint
• high efficiency up to 88%
• single and dual output models available
• board mount
• 1500 Vdc isolation
• industrial operating temp -40~+85 °C
• 4:1 wide input range
• input under voltage protection & over voltage protection
• over current protection
• EN 62368-1 MODEL input voltage output voltage output current output power ripple & noise1 efficiency2 typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PQDE6W-Q24-S3-D 24 9~36 3.3 0 1500 4.95 85 79 PQDE6W-Q24-S5-D 24 9~36 5 0 1200 6 85 83 PQDE6W-Q24-S9-D 24 9~36 9 0 667 6 85 85 PQDE6W-Q24-S12-D 24 9~36 12 0 500 6 85 87 PQDE6W-Q24-S15-D 24 9~36 15 0 400 6 85 88 PQDE6W-Q24-S24-D 24 9~36 24 0 250 6 85 88 PQDE6W-Q24-D5-D 24 9~36 ±5 0 ±600 6 85 83 PQDE6W-Q24-D12-D 24 9~36 ±12 0 ±250 6 85 87 PQDE6W-Q24-D15-D 24 9~36 ±15 0 ±200 6 85 88 PQDE6W-Q24-D24-D 24 9~36 ±24 0 ±125 6 85 88 PQDE6W-Q48-S3-D 48 18~75 3.3 0 1500 4.95 85 79 PQDE6W-Q48-S5-D 48 18~75 5 0 1200 6 85 83 PQDE6W-Q48-S12-D 48 18~75 12 0 500 6 85 87 PQDE6W-Q48-S15-D 48 18~75 15 0 400 6 85 88 PQDE6W-Q48-S24-D 48 18~75 24 0 250 6 85 88 PQDE6W-Q48-D5-D 48 18~75 ±5 0 ±600 6 85 83 PQDE6W-Q48-D12-D 48 18~75 ±12 0 ±250 6 85 87 PQDE6W-Q48-D15-D 48 18~75 ±15 0 ±200 6 85 88 Notes: 1. From 5~100% load, nominal input, 20 MHz bandwidth oscilloscope, with 10 µF tantalum and 1 µF ceramic capacitors on the output. From 0~5% load, ripple and noise is <5% Vo. 2. Measured at nominal input voltage, full load. 3. All specifications are measured at Ta=25°C, humidity < 75%, nominal input voltage, and rated output load unless otherwise specified. Additional Resources: Product Page | 3D Model | PCB Footprint

cui.com date 07/21/2021 │ page 2 of 6CUI Inc │ SERIES: PQDE6W-D │ DESCRIPTION: DC-DC CONVERTER INPUT parameter conditions/description min typ max units operating input voltage 24 Vdc input models

48 Vdc input models

start-up voltage 24 Vdc input models

24 Vdc input models

-0.7 -0.7 100 Vdc Vdc under voltage shutdown 24 Vdc input models 5.5 6.5 15.5 Vdc Vdc current 24 Vdc input models 3.3 Vdc output models all other models 268 309 mA mA 48 Vdc input models 3.3 Vdc output models all other models 134 155 mA mA filter Pi filter input reverse polarity protection no no load power consumption 0.12 W OUTPUT parameter conditions/description min typ max units maximum capacitive load1

3.3 Vdc output models

5 Vdc output models

9 Vdc output models

12, ±5 Vdc output models

15 Vdc output models

1,800 1,000 680 470 220 100 μF μF μF μF μF μF voltage accuracy2 0% to full load ±1 ±3 % line regulation from low line to high line, full load positive outputs negative outputs ±0.2 ±0.5 ±0.5 load regulation3 from 5% to full load positive outputs negative outputs ±0.5 ±0.5 ±1.5 voltage balance4 dual output models ±5 % cross regulation dual output models: main output 50% load secondary output from 10~100% load ±5 % switching frequency5 PWM mode 300 kHz transient recovery time 25% load step change, nominal input voltage 300 500 μs Note: 1. Tested at input voltage range and full load. 2. At 0~5% load, the max output voltage accuracy for the ±5 & ±9 Vdc output models is ±5%. 3. At 0~100% load, the max load regulation is ±5%. 4. Unbalanced loads should not exceed ±5%. If ±5% is exceeded, the product performance cannot be guaranteed. 5. Value is based on full load. At loads <50%, the switching frequency decreases with decreasing load. PART NUMBER KEY Base Number PQDE6W - QXX - X XX - D Input Voltage Output Voltage Mounting Style: D = DIPOutput S = single D = dual Additional Resources: Product Page | 3D Model | PCB Footprint

cui.com date 07/21/2021 │ page 3 of 6CUI Inc │ SERIES: PQDE6W-D │ DESCRIPTION: DC-DC CONVERTER 10 Sec. Max. Wave Soldering Time 4 Sec. Max. Peak Temp. 260°C Max. Time (sec.) Temperature (°C) 250 200 150 100 OUTPUT (CONTINUED) parameter conditions/description min typ max units transient response deviation 25% load step change, nominal input voltage 3.3, 5, ±5 Vdc output models all other models temperature coefficient at full load ±0.03 %/°C PROTECTIONS parameter conditions/description min typ max units over voltage protection 110 160 % over current protection 110 140 190 % short circuit protection continuous, self recovery SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output for 1 minute at 1 mA 1,500 Vdc isolation resistance input to output at 500 Vdc 1,000 MΩ isolation capacitance input to output, 100 kHz / 0.1 V 1,000 pF safety approvals certified to 62368-1: EN certified to 60950-1: UL conducted emissions CISPR22/EN55022, class A (no external circuit); class B (external circuit required, see Figure 3-b) radiated emissions CISPR22/EN55022, class A (no external circuit); class B (external circuit required, see Figure 3-b) ESD IEC/EN61000-4-2, contact ± 4kV, class B radiated immunity IEC/EN61000-4-3, 10V/m, class A EFT/burst IEC/EN61000-4-4, ± 2kV, class B (external circuit required, see Figure 3-a) surge IEC/EN61000-4-5, line-line ± 2kV, class B (external circuit required, see Figure 3-a) conducted immunity IEC/EN61000-4-6, 3 Vr.m.s, class A voltage dips & interruptions IEC/EN61000-4-29, 0%-70%, class B MTBF as per MIL-HDBK-217F, 25°C 1,000,000 hours RoHS 2011/65/EU ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curve -40 85 °C storage temperature -55 125 °C storage humidity non-condensing 5 95 % vibration 10~55 Hz for 30 minutes on each axis 10 G SOLDERABILITY parameter conditions/description min typ max units hand soldering 1.5 mm from case for 10 seconds 300 °C wave soldering see wave soldering profile 260 °C Additional Resources: Product Page | 3D Model | PCB Footprint

cui.com date 07/21/2021 │ page 4 of 6CUI Inc │ SERIES: PQDE6W-D │ DESCRIPTION: DC-DC CONVERTER Recommended PCB Layout Top View Note: 2.54 x 2.54 mm grid units: mm [inch] tolerance: ±0.50[±0.020] pin diameter tolerance: ±0.10[±0.004] DERATING CURVE PIN CONNECTIONS PIN Function Single Dual

1 GND GND

2 Vin Vin

4 No Pin 0V

parameter conditions/description min typ max units case material aluminum alloy weight 14 g MECHANICAL DRAWING Additional Resources: Product Page | 3D Model | PCB Footprint

date 07/21/2021 │ page 6 of 6CUI Inc │ SERIES: PQDE6W-D │ DESCRIPTION: DC-DC CONVERTER CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 02/20/2018 1.01 features and safety line updated, packaging removed 01/14/2021 1.02 derating curve and circuit figures updated 07/21/2021 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

Additional Resources: Product Page | 3D Model | PCB Footprint