PQDE6W-Q110 CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

cui.com date 08/11/2020 page 1 of 9 SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER

FEATURES

  • up to 6W isolated output
  • industry standard pinout
  • ultra-wide 4:1 input range (40~160)
  • single/dual outputs
  • 2250 Vdc isolation
  • output short circuit, over current and over voltage protection
  • input undervoltage protection
  • wide operating temp: -40°C to +85°C
  • EN62368 approved
  • meets EN50155 railway standard MODEL input voltage output voltage output current output power ripple & noise1 efficiency2 typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) min/typ (%) PQDE6W-Q110-D5 110 40~160 ±5 0 ±600 6 100 78/80 PQDE6W-Q110-D12 110 40~160 ±12 0 ±250 6 100 82/84 PQDE6W-Q110-D15 110 40~160 ±15 0 ±200 6 100 83/85 PQDE6W-Q110-S5 110 40~160 5 0 1200 6 100 78/80 PQDE6W-Q110-S12 110 40~160 12 0 500 6 100 82/84 PQDE6W-Q110-S15 110 40~160 15 0 400 6 100 83/85 PQDE6W-Q110-S24 110 40~160 24 0 250 6 100 84/86 Notes: 1. From 5~100% load, nominal input, 20 MHz bandwidth oscilloscope, with 10 µF tantalum and 1 µF ceramic capacitors on the output. From 0~5% load, ripple and noise is <5% Vo 2. Measured at nominal input voltage and rated output load. PART NUMBER KEY Base Number PQDE6W - Q110 - XXX - X - XXX Input Voltage Output Voltage Mounting Style: D = DIP T = CHASSIS DIN = DIN-RAIL Output S = single D = dual Heatsink “blank” = no heatsink H = with heatsink Additional Resources: Product Page

cui.com date 08/11/2020 │ page 2 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER INPUT parameter conditions/description min typ max units operating input voltage 40 170 Vdc start-up voltage 40 Vdc surge voltage for maximum of 1 second -0.7 180 Vdc current full load / no load 68/3 70/8 mA filter Pi filter CTRL module on: CTRL open or pulled high (3.5~12 V) module off: CTRL pulled low to GND (0~1.2 V) OUTPUT parameter conditions/description min typ max units maximum capacitive load output voltage

5 Vdc dual output

12 Vdc dual output

15 Vdc dual output

5 Vdc single output

12 Vdc single output

15 Vdc single output

24 Vdc single output

μF μF μF μF μF μF μF voltage accuracy 0%~100% load ±1 ±3 % line regulation from low line to high line, full load +Vo -Vo ±0.2 ±0.5 ±0.5 load regulation 5%~100% load +Vo -Vo ±0.5 ±0.5 ±1.5 switching frequency PWM mode 300 kHz transient recovery time 25% load step change, nominal input voltage 300 500 μs transient response deviation 25% load step change, nominal input voltage

5 Vdc, ±5 Vdc output

temperature coefficient at full load ±0.02 ±0.03 %/°C Additional Resources: Product Page

cui.com date 08/11/2020 │ page 3 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER PROTECTIONS parameter conditions/description min typ max units over voltage protection 110 160 %Vo over current protection 120 210 % short circuit protection continuous, auto recovery SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output input/output to case 2,250 1,600 Vdc Vdc isolation resistance input to output at 500 Vdc 1,000 MΩ isolation capacitance input to output, 100 kHz / 0.1 V 1,000 pF safety approvals EN/IEC 62368 EMI/EMC CISPR 32/EN 55032 Class B conducted emissions EN 50121-3-2 150kHz-500kHz 99dBuV, 500kHz-30MHz 93dBuV (see Fig.3 or Fig.4 for recommended circuit) radiated emissions EN 50121-3-2 30MHz-230MHz 40dBuV/m at 10m, 230MHz-1GHz 47dBuV/m at 10m (see Fig.3 or Fig.4 for recommended circuit) ESD IEC/EN 61000-4-2 Contact ±6KV/Air ±8KV, EN 50121-3-2 Contact ±6KV/Air ±8KV, perf. Criteria B radiated immunity IEC/EN 61000-4-3 20 V/m, EN50121-3-2 20 V/m, perf. Criteria A EFT/burst IEC/EN 61000-4-4 ±4KV, EN 50121-3-2 ±2kV 5/50ns 5kHz, perf. Criteria B surge IEC/EN 61000-4-5 line to line ±2KV/line to ground ±4KV, EN 50121-3-2 line to line ±1KV (42Ω, 0.5μF) line to ground ±2KV (42Ω, 0.5μF), perf. Criteria B (see Fig.3 for recommended circuit) MTBF as per MIL-HDBK-217F, 25°C 1,000 K hours RoHS yes ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curve -40 80 °C storage temperature -55 125 °C storage humidity non-condensing 5 95 % vibration IEC61373 - Category 1, Grade B Additional Resources: Product Page

cui.com date 08/11/2020 │ page 4 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER units: mm [inch] tolerance: ±0.50[±0.020] pin diameter tolerance: ±0.10[±0.004] PIN Out PIN Single Dual 1 no pin ctrl

2 GND GND

3 Vin Vin

parameter conditions/description min typ max units dimensions 25.40 × 25.40 × 11.70 Horizontal package (without heat sink) 25.40 × 25.40 × 16.20 Horizontal package (with heat sink) 76.00 × 31.50 × 21.20 A2S wiring package (without heat sink) 76.00 × 31.50 × 25.20 A2S wiring package (with heat sink) 76.00 × 31.50 × 25.80 A4S rail package (without heat sink) 76.00 × 31.50 × 29.80 A4S rail package (with heat sink) mm mm mm mm mm mm case material aluminum alloy weight Horizontal package without heatsink A2S wiring package without heatsink A4S rail package without heatsink Horizontal package with heatsink A2S wiring package with heatsink A4S rail package with heatsink 12.5 36.0 56.0 17.0 40.0 59.0 g g g g g g MECHANICAL DRAWING Additional Resources: Product Page

cui.com date 08/11/2020 │ page 5 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER MECHANICAL DRAWING units: mm [inch] tolerance: ±0.50[±0.020] pin diameter tolerance: ±0.10[±0.004] PIN Out PIN Single Dual 1 no pin ctrl units: mm [inch] wire range: 24-12 AWG tightening torque: max 0.4 N·m tolerance: ±0.50 [±0.020] PIN Out PIN 1 2 3 4 5 6 Single NC GND Vin +Vo NC 0V Dual ctrl GND Vin +Vo 0V -Vo Additional Resources: Product Page

cui.com date 08/11/2020 │ page 6 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER units: mm [inch] wire range: 24-12 AWG tightening torque: max 0.4 N·m tolerance: ±1.00 [±0.039] PIN Out PIN 1 2 3 4 5 6 Single NC GND Vin +Vo NC 0V Dual ctrl GND Vin +Vo 0V -Vo units: mm [inch] mounting rail: TS35 wire range: 24-12 AWG tightening torque: max 0.4 N·m tolerance: ±1.00 [±0.039] PIN Out PIN 1 2 3 4 5 6 Single NC GND Vin +Vo NC 0V Dual ctrl GND Vin +Vo 0V -Vo units: mm [inch] mounting rail: TS35 wire range: 24-12 AWG tightening torque: max 0.4 N·m tolerance: ±1.00 [±0.039] PIN Out PIN 1 2 3 4 5 6 Single NC GND Vin +Vo NC 0V Dual ctrl GND Vin +Vo 0V -Vo Additional Resources: Product Page

cui.com date 08/11/2020 │ page 7 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER DERATING CURVE Figure 1 EFFICIENCY CURVES Additional Resources: Product Page

date 08/11/2020 │ page 9 of 9CUI Inc │ SERIES: PQDE6W-Q110 │ DESCRIPTION: DC-DC CONVERTER CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 08/11/2020 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

Additional Resources: Product Page