PPS-05A-50R0MLF AAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

American Accurate Components, Inc. POWER SPLITTER – High Precision Power Chip Divider The content of this specification may change without notification 10/23/08

188 Technology Drive, Unit H, Irvine, CA 92618

TEL: 949-453-9888 Š FAX: 949-453-8889 HOW TO ORDER PPS -10 A- 50R0 M LF Terminal Material SnPb = Leave Blank Lead Free = LF Packaging M = tape/reel 5,000 pcs O = tape/reel 1,000 pcs Impedance 50Ω Circuit Configuration A o r B Size 0402 = 05 0603 = 16 0805 = 10 1206 = 18 2010 = 12 Series Precision Power Splitter

FEATURES

ƒ High Frequency Splitter is constructed of thin film resistive material ƒ Power splitter with excellent high frequency characteristics for applications from DC~20GHz ƒ This product has a small reflection feature, allowing for superior in high frequency applications ƒ Allows for high density mounting ƒ Bit error is restrained by keeping high frequency digital signal stable PPS-A ELECTRICAL CHARACTERISTICS Item PPS-16A PPS-10 PPS-18A PPS-12A Size 0603 0805 1206 2010 Circuit Configuration A A A A Operating Frequency DC~20GHz DC~17.5GHz DC~15GHz DC~10GHz Split Deviation 0.3dB max 0.3dB max 0.3dB max 0.3dB max Input Power at 70°C 100mW 125mW 250mW 500mW Max Overload Power 200mW 250mW 500mW 1000mW Resistance R1 = R2 = R3 = 50Ω typical Operating Temperature -40°C ~ +125°C Packaging 1,000/Reel or 5,000/Reel PPS-B ELECTRICAL CHARACTERISTICS CIRCUIT Item PPS-10B PPS-18B Configuration A Configuration B Size 0805 1206 Circuit Configuration B B Resistance Tolerance ±0.1%, ±0.5%, ±1% TCR ±50ppm/°C ±50ppm/°C Power Rating per Element 33 mW 42 mW Power Rating per Package 100 mW 125 mW Rated Operating Temp 70°C Resistance R1 = R2 = R3 = 50Ω typical Operating Temp. Range -55°C ~ +125°C Package Quantity 1,000/Reel or 5,000/Reel

American Accurate Components, Inc. POWER SPLITTER – High Precision Power Chip Divider The content of this specification may change without notification 10/23/08 TEL: 949-453-9888 Š FAX: 949-453-8889 *** Custom Designs Available DERATING CURVE – Circuit A DERATING CURVE – Circuit B DIMENSIONS (mm) Series L W a b t SCHEMATIC LEGEND SCHEMATIC – Circuit A 1. Thin Film Resistor 2. Overcoat Resin 3. Terminal (SnPb or Lead Free) 4. Marking (dot to indicate direction & bar) 5. Alumina Substrate PERFORMANCE Item Test Condition Tolerance Short Time Overload 2.5 times of the ra ted voltage shall be applied for 5 seconds. ±0.1% Rated Load Life Apply rated voltage for 90 min followed by a pause of 30 min at 70±3°C for 1000 hours. ±0.25% Moisture Load Life The chip divider is applied rated voltage for 90 min at 60±2°C 90～95%RH for 1000 hours. ±0.25% Soldering Heat Resistance Leave NR in me lt solder of 260±5°C for 10±1 seconds. ±0.1% Strength Between Terminals Distance between fulcrums : 90 mm; Bending width : 3mm; Substrate: Glass epoxy t=1.6mm ±0.1% Solderability Leave NR in melted solder of 235±5°C for 3±0.5 seconds. ≥95% of the surface should be wet Insulation Resistance A minute after 500 DC ≥ 1000M Ω