PPM15-C-09E

PPM MAKE-PS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Input voltage range 85- 264VAC, 120- 370VDC Input frequency 47- 63Hz Input current PPM05 PPM10 PPM15 PPM20 PPM25 110VAC 230VAC 120mA , typ. 70mA , typ. 230mA , typ. 120mA , typ. 250mA , typ. 140mA , typ. 330mA , typ. 180mA , typ. 420mA , typ. 230mA , typ. Inrush current PPM05 PPM10 PPM15 PPM20/PPM25 110VAC 230VAC 10A, typ. 20A, typ. 10A, typ. 20A, typ. 10A, typ. 20A, typ. 16A, typ. 30A, typ. External input fuse(recommended) PPM05 PPM10/PPM15 PPM20/PPM25 1A/250V slow blow 2A/250V slow blow 3.15A/250V slow blow Output Specifications Voltage set accuracy ±2%(main out) Input variation ±0.5% (main output) ±1.5% (supplement output) Load variation (10-100%) Single output mode ls ±1% Ripple& noise(p-p) 20MHz Bandwidth ≤100mV Short circuit protection Continuous, and auto resume Over current protection ≥110% IO Over output voltage protection 3.3 / 5VDC models 9VDC model 12 / 15VDC model s 24VDC model 48VDC model ≤6.5VDC ≤12VDC ≤20VDC ≤30VDC ≤60VDC General Specifications Temperature ranges Operating : Power derating above 55° C: Storage: Case temperature: -25° C to +70° C 3.75%/° C (2.25%/° C PPM20-D-05ELF < 50° ) -25° C to +105° C +90° C max Weight PPM05, PPM10, PPM15, PPM20/25 ~50g, ~70g , ~80g, ~120g Hold-up time (Vin=230VAC) 80m s(typ.) Humidity (non condensing) 85%(max) Temperature coefficient 0.02% /° C Switching frequency 150kHz max Efficiency See table I/O-isolation voltage 3000VAC/1Min Leakage current 0.3mA RMS typ. 230VAC/50Hz Case material UL 94V-0 rated Install PCB MTBF >200,000h @25° C RoHS compliant Soldering 260° C / max. 10 sec. www.make-ps.com E-mail:info@make-ps.com Single Output AC/DC Converter Series PPM 5-25 Watt | AC-DC Converter

Examples of Partnumbers/Modelcode PART NO. Power (Watt) INPUT CURRENT (mA, typ..) 110VAC / 230VAC OUTPUT (Volt) RIPPLE AND NOISE (typ..) EFFICIENCY (% min.) PPM05-A-3.3E 4 120 / 70 3.3V / 1250mA 50mV 70 PPM05-A-05E 5 120 / 70 5V / 1000mA 50mV 75 PPM05-A-09E 5 120 / 70 9V / 550mA 50mV 77 PPM05-A-12E 5 120 / 70 12V / 420mA 50mV 79 PPM05-A-15E 5 120 / 70 15V / 330mA 50mV 80 PPM05-A-24E 5 120 / 70 24V / 230mA 50mV 82 PPM10-B-3.3E 6.6 230 / 120 3.3V / 2000mA 50mV 70 PPM10-B-05E 10 230 / 120 5V / 2000mA 50mV 76 PPM10-B-09E 10 230 / 120 9V / 1100mA 50mV 78 PPM10-B-12E 10 230 / 120 12V / 900mA 50mV 80 PPM10-B-15E 10 230 / 120 15V / 700mA 50mV 81 PPM10-B-24E 10 230 / 120 24V / 450mA 50mV 82 PPM15-C-3.3E 9.9 250 / 140 3.3V / 3000mA 50mV 73 PPM15-C-05E 15 250 / 140 5V / 2800mA 50mV 76 PPM15-C-09E 15 250 / 140 9V / 1600mA 50mV 78 PPM15-C-12E 15 250 / 140 12V / 1250mA 50mV 80 PPM15-C-15E 15 250 / 140 15V / 1000mA 50mV 80 PPM15-C-24E 15 250 / 140 24V / 625mA 50mV 84 PPM15-C-48E 15 250 / 140 48V / 320mA 50mV 85 PPM20-D-3.3E 20 330 / 180 3.3V / 4100mA 50mV 73 PPM20-D-05E 20 330 / 180 5V / 3500mA 50mV 75 PPM20-D-12E 20 330 / 180 12V / 1600mA 50mV 81 PPM20-D-15E 20 330 / 180 15V / 1300mA 50mV 83 PPM20-D-24E 20 330 / 180 24V / 850mA 50mV 85 PPM25-D-05E 25 420 / 230 5V / 4100mA 50mV 74 PPM25-D-12E 25 420 / 230 12V / 2100mA 50mV 82 PPM25-D-15E 25 420 / 230 15V / 1600mA 50mV 83 PPM25-D-24E 25 420 / 230 24V / 1100mA 50mV 85 PPM25-D-48E 25 420 / 230 48V / 500mA 50mV 87 Other specifications please enquire.

NOTE: Unit: mm Pin section: 1.00mm Pin tolerances: +/- 0.1mm General tolerances: +/- 0.5mm Dimensions / Pinning No. PPMxx- A No. PPMxx-B No. PPMxx-C No. PPMxx-D A 12.5 A 17.5 A 17.5 A 20.0 B 48.5 B 55.0 B 62.0 B 70.0 C 40.5 C 47.0 C 54.0 C 62.0 D 4.0 D 5.0 D 5.0 D 5.75 E 16.0 E 20.0 E 20.0 E 23.0 F 36.0 F 45.0 F 45.0 F 48.0 G 20.5 G 20.5 G 22.5 G 23.5 App Notes Remarks : 1.Ripple and Noise were measured by the method of parallel lines; 2.Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA=25° C, humidity < 75%; 3.All specifications stated in this datasheet are subject to the above listed model only. For specifications of non-standard model, please contact our technical support team. # Single Output

1 Ground*

2 AC (N)

3 AC (L)

5 Omitted

6 Omitted

7 Omitted

TRIM TRIM** * No G. on PPM15-x ** Only for PPM20/25-x PINNING PPMxx-x-xxE

25.4mm 25.4mm Connect Oscillograph Probe Fuse Typical Applications PPM-Series PPMxx-x-xxELF (single Output) L +Vo -Vo L N N Fuse FG FG Tvs1 RL NT C Remarks 1.Output filtering capacitor C5, C3 and C1 are electrolytic capacitor. It is recommended to use high frequency and low resistance electrolytic capacitor. For capacitance and current of the capacitor please refer to suppliers’ specifications. Voltage derating of capacitor should be 80% or above.C2, C4 and C6 eliminate high frequency noise. TVS is a recommended component to protect post- circuits (when converter fails). 2. External input NTC is recommended to use 5D-9 (Only PPM10 model and PPM15 model) External Typical Value Partnumber Partnumber PPM05-A-3.3E 330 PPM15-C-3.3E 680 PPM05-A-05E 330 PPM15-C-05E 680 PPM05-A-09E 120 PPM15-C-09E 470 PPM05-A-12E 120 PPM15-C-12E 220 PPM05-A-15E PPM15-C-15E 220 PPM05-A-24E PPM15-C-24E PPM15-C-48E PPM10-B-3.3E 470 PPM10-B-05E 330 PPM20-D-3.3E 330 PPM10-B-09E 120 PPM20-D-05E 330 PPM10-B-12E 120 PPM20-D-12E 220 PPM10-B-15E 120 PPM20-D-15E 220 PPM10-B-24E PPM20-D-24E 220 PPM25-D-12E 330 PPM25-D-15E 330 PPM25-D-24E 120 PPM25-D-48E TRIM (only PPM20/25-D-xxE Note: Value for R1, R2, R3, and Vref refer to the f ollowing table. R T : Resistance of Trim a: User-defined parameter, no actual meanings. 3.3V 12V 15V 24V 48V R1(KΩ) 3.3 3.83 7.5 8.66 1.2 R2(KΩ) 1.2 3.3 1.5 R3(KΩ) 1.2 Vref(V) 1.24 2.5 2.5 2.5 2.5 2.5 Vot(V) Output voltage of Trim, variation ≤ ±10%