PDA2446 HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Variety of Flange/Pinout Options
  • Compact Package
  • High Reliability Planar InGaAs PIN Photodiode
  • High Responsivity
  • High Linearity
  • Low Back Reflection
  • High Bandwidth >1.5 GHz
  • –40 °C to +85°C Operating Temperature Range

Applications

  • CATV/CCTV
  • Fiber in the Loop (FITL)

Description

includes a variety of compact fiber pigtailed devices designed for wide operating temperature, low cost applications such as fiber in the loop. The planar InGaAs photodiodes are manufac- tured using MOVPE growth technology and give low leakage and high responsivity perform- ance with excellent reliability. The construction of the devices includes a hermetically sealed photodiode and an actively aligned fiber pigtail and is designed to be compatible with the environmental requirements of the Bellcore TA-NWT-000983 document. The product range includes a variety of pinout, fiber type, and package mounting bracket options, designed to match the majority of offerings in the marketplace. If the specific arrangement or performance you require is not listed, please contact Hewlett-Packard. High flexible design and manufacturing processes allow both physical and electro-optic customization to suit your needs. 5965-7314E (4/97)

PDA Pigtailed Photodiode Specifications Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Symbol Minimum Maximum Units Reverse Voltage Vr - 20 V Reverse Current Ir - 1 mA Forward Voltage Vf - 1 V Forward Current If - 5 mA Power Dissipation - - 50 mW Operating Temperature Tc –40 +85 °C Storage Temperature Ts –40 +85 °C Soldering – 10 seconds - - +260 °C Fiber Pull - - 10 N Performance Specifications Test Conditions: Unless Otherwise Stated PDA2446 Parameter Symbol Vr = 5 V, Tc = +25 °C Min. Max. Units Dark Current Id - 1 nA Tc= +85°C- 5 0 n A Reverse Breakdown Voltage Vbr Ir = 10 µA3 5 - V Capacitance C 1 MHz - 1.7 pF Responsivity R λ = 1300 nm 0.7 - A/W Operating Wavelength λ 80% points 1200 1650 nM Small Signal Bandwidth Bw 1.5 - GHz Linearity X 1 Second Order - Vr = 15 V -70 dBc fl = 135 MHz f2 = 190 MHz 70% Modulation 0 dBm Optical Power Third Order - As above -85 dBc Fiber Pigtail: Tight jacketed, self-mode stripping, singlemode fiber Parameter Minimum Maximum Units Length 1.0 - m Core Diameter 8 10 µm Cladding Diameter 122 128 µm Concentricity Error - 8 % Secondary Jacket Diameter 0.8 1.0 mm

PDA Mechanical Outline Options PDA2446-B PDA2446-D PIN 1: CATHODE +VE PIN 2: CASE PIN 3: ANODE –VE MIN. 12.0 A ∅ B C D DIM. ∅ B A ∅ G MIN. 0.41 1000 2.54 NOM. ∅ E F ∅ G DIM. ALL DIMENSIONS IN MILLIMETERS DC F ∅ E MAX. 25.0 6.5 8.5 MAX. 0.47 MIN. 12.0 0.41 1000 A ∅ B C D ∅ E F G DIM. H A ∅ N MIN. 12.7 NOM. 0.9 3.8 2.54 NOM. 2.1 H J K L M ∅ N ∅ P DIM. ALL DIMENSIONS IN MILLIMETERS D C G ∅ E MAX. 25.0 6.5 8.5 0.47 18.0 MAX. 7.5 1.1 7.5 4.2 2.4 L J K F ∅ P ∅ B M

Ordering Information

Connector Type: AP = Angle Polished FC/PC AS = Angle Polished SC/PC US = Ultra Polished SC/PC SF = Super Polished FC/PC Flange Type: B = Barrel D = 2 hole PCB mount, 12.7 mm between centers Additional options are available to meet your specific needs. Please contact your local representative for details.

Discrete Pin-Preamplifiers Preliminary Technical Data PPA0052, PPA1052 PPA0155, PPA1155

  • Integrated InGaAs PIN and GaAs Preamplifier
  • FC or SC Receptacle or Fiber Pigtailed
  • Compact Package
  • High Reliability Planar InGaAs PIN Photodiode
  • High Responsivity
  • SONET/SDH
  • Instrumentation
  • O-E Converters
  • Single and Multimode Fiber Communications Systems
  • Data Communication Receivers
  • FDDI

The PPA*052 and PPA*155 are compact connectorized or pigtailed InGaAs photodiodes with preamplifier designed for wide operating temperature range, low cost applications such as SONET/SDH and Fiber in the Loop. The planar InGaAs photodiodes are manufactured using MOVPE growth technology which gives low leakage and high responsivity performance with excellent reliability. The wide dynamic range GaAs IC pre- amplifier ensures compliance with SONET/SDH standards. The construction of the devices includes a hermetically sealed photodiode and amplifier actively aligned within a receptacle housing or to a fiber pigtail and is designed to be compliant with Bellcore TA-TSY-000983. (5/97) Preliminary Product Disclaimer This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development and targeted for release during 1997. Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices, specifications, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time.

Performance Specifications Absolute Limiting Ratings Absolute (limiting) ratings mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Symbol Minimum Maximum Units Supply Voltage V DD - 5.5 V Photodiode Voltage (Negative) V pin - –7 V Power Dissipation - - 350 mW Operating Temperature Tc –40 +85 °C Storage Temperature Ts –40 +85 °C Soldering – 10 seconds - - +260 °C Fiber Pull - - 10 N Performance Specifications[1] Parameter Minimum Maximum Units Responsivity 0.75 - A/W Sensitivity[2] 52 Mb/s –39 - dBm

155 Mb/s –36

Overload[2,3] –7 - dBm Bandwidth 52 Mb/s 35 - MHz

155 Mb/s 90

Output Impedance 30 60 ohms VDD Supply Voltage 4.75 5.25 V VDD Supply Current - 50 mA Photodiode Supply –7 –4.5 V Notes: 1. Measured over the operating temperature range and power supply tolerance. 2. Measured at the data rate specified for 1 x 10 -10 using an infinite extinction ratio laser source modulated with a 2 23-1 PRBS pattern. 3. Higher overload performance available. Contact your local Hewlett-Packard Components representative for details. Fiber Pigtail: Tight jacketed, self-mode stripping, multimode Parameter Minimum Maximum Units Length 0.4 1.2 m Core Diameter 47 53 µm Cladding Diameter 122 128 µm Concentricity Error - 8 % Secondary Jacket Diameter 0.8 1.0 mm Schematic Diagram VDD +5 V GND O/P V pin -5 V 1. GND 2. VOUT 3. V pin 4. +V DD

MIN. 12.0 0.27 M8 x 0.75 13.35 A B C ∅ D E ∅ F ∅ G H DIM. MIN. 2.08 2.54 NOM. ∅ J L M N P ∅ Q ∅ R DIM. ALL DIMENSIONS IN MILLIMETERS MAX. 19.5 9.5 15.0 9.1 0.33 13.55 MAX. 2.32 1.65 2.2 6.8 8.2 4.2 P ∅ Q N ∅ F ∅ G M C E ∅ D L H ∅ J ∅ R A B SLOT 1. GND 2. VOUT 3. V pin 4. +V DD PPA0052-SC-A PPA0155-SC-A MIN. 12.0 A B C D E F DIM. MIN. 2.0 0.27 2.08 2.54 NOM. 17.8 G ∅ H ∅ J ∅ K ∅ L M DIM. ALL DIMENSIONS IN MILLIMETERS MAX. 9.5 23.0 13.5 15.5 8.0 MAX. 3.0 0.33 7.5 2.5 18.2 ∅ K ∅ H F ∅ L G ∅ J M D E C A B SLOT PPA1052-A PPA1155-A MIN. 12.0 0.27 400 A B C D ∅ E F DIM. MIN. 2.54 NOM. 13.35 2.1 ∅ G H K L ∅ M ∅ N DIM. ALL DIMENSIONS IN MILLIMETERS MAX. 25.0 19.5 9.5 0.33 1200 MAX. 9.5 2.0 13.55 2.4 6.25 L A ∅ G DC F ∅ E H B ∅ N K ∅ M

Allowable Part Numbers: PPA0052 - XX - A PPA0052 - FC - A PPA0155 - XX - A PPA0052 - SC - A Receptacle Type: PPA1052 - A - FP FC = FC PPA1052 - A - ST SC = SC PPA1052 - A - DN PPA1052 - A - SC PPA1052 - X - XX PPA1052 - D - FP PPA1155 - X - XX PPA1052 - D - ST Connector Type: PPA1052 - D - DN FP = FC/PC PPA1052 - D - SC ST* = ST DN = DIN PPA0155 - FC - A SC = SC PPA0155 - SC - A PPA1155 - A - FP Flange Type: PPA1155 - A - ST A = 2 hole Panel mount, 13.4 mm between centers PPA1155 - A - DN D = 2 hole PCB mount, 12.7 mm between centers PPA1155 - A - SC PPA1155 - D - FP PPA1155 - D - ST PPA1155 - D - DN PPA1155 - D - SC *ST is a registered trademark of AT&T. PPA1052-D PPA1155-D MIN. 12.0 0.27 400 2.54 NOM. A B C D ∅ E F ∅ G DIM. MIN. 3.8 0.9 12.7 NOM. 2.1 H J K L ∅ M ∅ N P DIM. ALL DIMENSIONS IN MILLIMETERS MAX. 25.0 18.0 9.5 0.33 1200 MAX. 4.2 7.5 1.1 2.4 6.25 7.5 L A ∅ G D C F ∅ EP J K B ∅ M ∅ N H