PP3G07S

PP3G07S STANLEY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

Package φ3 type, Water clear epoxy TTW (Through The Wave) soldering and manual soldering ※Please refer to Soldering Conditions about soldering. Soldering methods ESD Packing 2kV (HBM) Bulk : 200pcs(MIN.) Half Intensity Angle 2009.3.23

2009.3.23 PP3G07S Through-hole PIN Photodiode/φ3 Type Absolute Maximum Ratings Item Symbol Unit Power Dissipation P d mW Reverse Voltage V R V Operating Temperature T opr ℃ Storage Temperature T stg ℃ Electro-Optical Characteristics Conditions Min. 1.0 μA TYP. 1.5 μA Response Time VR=10V, RL=1,000Ω tr/tf TYP. 20/20 ns Capacity VR=10V, f=1MHz CT TYP. 7 pF TYP. 1 nA Max. 10 nA Peak Sensitivity Wavelength VR=0V λpT Y P .9 5 0 n m Spatial Half Width V R=5V ⊿θ TYP. 155 deg. ※1 Color temperature is 2,856K. Employs a standard tungsten lamp. -30~+100 Absolute Maximum Ratings -30~+85 CharacteristicsItem UnitSymbol Photo Current VR=5V, Ee=1.0mW/cm2 ※1 Ip Dark Current V R=10V I D (Ta=25℃) (Ta=25℃)

2009.3.23 PP3G07S Technical Data Through-hole PIN Photodiode/φ3 Type Spatial Distribution ExampleWavelength vs. Relative Sensitivity Condition : Ta = 25℃, VR = 0V Wavelength [nm] Relative Sensitivity (%) Irradiance vs. Relative Photo Current Condition : Ta = 25℃, VR = 5V Irradiance Ee(mW/cm2) Relative Photo Current Ip Reverse Voltage vs. Photo Current Condition : Ta = 25℃, Ee = 1mW/cm2 Reverse Voltage VR(V) Photo Current Ip (nA) It is based on Ee=1mW/cm2. Employs a standard tungsten lamp of 2,856K. Employs a standard tungsten lamp of 2,856K. Relative Photo Current (%) Condition : VR=5V, Ta = 25℃

2009.3.23 PP3G07S Technical Data Through-hole PIN Photodiode/φ3 Type Ambient Temperature vs. Relative Photo Current Condition : VR = 5V Ambient Temperature : Ta(℃) Reverse Voltage vs. Dark Current Condition : Ta = 25℃ Reverse Voltage VR(V) Dark Current ID (nA) Ambient Temperature vs. Power Dissipation Ambient Temperature : Ta(℃) Ambient Temperature vs. Dark Current Condition : VR = 10V Ambient Temperature : Ta(℃) Dark Current : ID(nA) Relative Photo Current Power Dissipation : Pd(mW)

2009.3.23 PP3G07S Technical Data Through-hole PIN Photodiode/φ3 Type Reverse Voltage vs. Capacitance Condition : Ta = 25℃, f = 1MHz Reverse Voltage : VR(V) Capacitance : CT(pF)

(Unit: mm) 2009.3.23 PP3G07S Through-hole PIN Photodiode/φ3 Type

Through-hole PIN Photodiode/φ3 Type TTW (Through The Wave) soldering Conditions Solder Bath Temp. Dipping Time 265 ℃ 5 s (MAX.) (MAX.) Position At least 3.0 mm away from the root of lead Iron tip temp. Soldering time and frequency 3 s 1 time 400 ℃ (MAX.) (MAX.) (MAX.) (30 W Max.) Position At least 3.0 mm away from the root of lead 2009.3.23 Pre-heating 100 ℃ (MAX.) Resin surface temperature 1) The dip soldering process shall be twice maximum. 2) The product shall be cooled to normal temperature before the second dipping process. ※The detail is described to LED and Photodetector handling precautions of home page: "Mounting through-hole Type Devices“ and "Soldering", and use it after the confirmation, please. Manual Soldering Conditions ※The detail is described to LED and Photodetector handling precautions of home page: "Mounting through-hole Type Devices“ and "Soldering", and use it after the confirmation, please.

Through-hole PIN Photodiode/φ3 Type Reliability Testing Result Failure Criteria Items Symbols Conditions Failure criteria Photo Current I P EE Value of each product Irradiance of Photo Current VR Value of each product Reverse Voltage of Photo Current Testing Max. Value ≧Initial Value x 1.3 Testing Min. Value ≦ Initial Value x 0.7 Dark Current I D VR Value of each product Reverse Voltage of Dark Current Testing Max. Value ≧ Spec. Max. Value x 1.2 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life EIAJ ED- 4701/100(101) Ta = 25℃, Pd = Maxium Rated Power Dissipation 1,000 h 0/16 Resistance to Soldering Heat EIAJ ED- 4701/300(302) 265±5℃, 3mm from package base 5s 0/16 Temperature Cycling EIAJ ED- 4701/100(105) Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 5 cycles 0/16 Wet High Temp. Storage Life EIAJ ED- 4701/100(103) Ta = 60±2℃, RH = 90±5% 1,000 h 0/16 High Temp. Storage Life EIAJ ED- 4701/200(201) Ta = Maximum Rated Storage Temperature 1,000 h 0/16 Low Temp. Storage Life EIAJ ED- 4701/200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/16 Lead Tension EIAJ ED- 4701/400(401) 5N,1time 10s 0/16 Vibration, Variable Frequency EIAJ ED- 4701/400(403) 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction 2 h 0/16 2009.3.23

Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet PP3G07S Page 9 Through-hole PIN Photodiode/φ3 Type 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2009.3.23