PP20B MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com PP20B SERIES

  • Power Rating Up to 75 Watts
  • High Efficiency of Over 98%
  • Footprint 20.30 mm X 18.50 mm
  • Lower Profile of 6.6 mm
  • High Isolation (operational) 1500 Vdc
  • High Frequency 200 KHz – 700 kHz
  • Operating Temperature -40ºC to +125ºC
  • Custom Design Available ELECTRICAL PARAMETERS @25°C Part Number PP20B- Primary Inductance (μH MIN) Leakage Inductance (μH MAX) DC Resistance (mΩ MAX) Turns Ratio Isolation (VDC) Figure Primary Secondary Primary Secondary A Aux 0601 50 0.30 20 100 1.5 & 1.5 6T 1T // 1T 1500 A 0602 50 0.30 20 100 3.00 6T 1T+1T 1500 A 0603 50 0.30 20 100 4.50 6T 3T 1500 B 0606 50 0.30 40 200 8.50 6T 6T 1500 C 0608 50 0.25 40 200 15.0 6T 8T 1500 C 0610 50 0.25 40 200 23.0 6T 10T 1500 C 1201 200 0.90 70 180 1.5 & 1.5 12T 1T // 1T 1500 A 1202 200 0.90 70 180 3.00 12T 1T+1T 1500 A 1203 200 0.90 70 180 4.50 12T 3T 1500 B 1206 200 0.70 140 360 8.50 12T 6T 1500 C 1208 200 0.70 140 360 15.0 12T 8T 1500 C 1210 200 0.70 140 360 23.0 12T 10T 1500 C Product performance is limited to specified parameters. Data is subject to change without prior notice. PLANAR TRANSFORMERS HIGH FREQUENCY 75 WATT APPLICATION OF CONFIGURATION APPLICATION OF CONFIGURATION Part Number PP20B- Vin Vout / Iout Part Number PP20B- Vin Vout / Iout 0603 18 – 36 Vdc 5.0 V @ 15 A 1203 36 – 75 Vdc 5.0 V @ 15 A 0608 18 – 36 Vdc 12V@6.25A -- 15V@5.00A 1208 36 – 75 Vdc 12V@6.25A -- 15V@5.00A 0610 18 – 36 Vdc 16V@4.68A -- 18V@4.16A 1210 36 – 75 Vdc 16V@4.68A -- 18V@4.16A NOTES: 1. The inductance is measured in windings Pin (2-5) at 100 KHz 100 mVrms. 2. The leakage inductance is measured in winding Pin (2 -5) with all other windings shorted.

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 DIMENSIONS (mm) SCHEMATICS Figure A Figure B Figure C SUGGESTED PAD LAYOUT PP20B SERIES PLANAR TRANSFORMERS HIGH FREQUENCY 75 WATT