PP20A MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com PP20A SERIES

  • Power Rating Up to 100 Watts
  • High Efficiency
  • Footprint 20.12 mm X 18.50 mm
  • Lower Profile of 7.4 mm
  • High Isolation (operational) 1500 Vdc
  • High Frequency 200 KHz – 700 KHz
  • Operating Temperature -40ºC to +125ºC
  • Custom Design Available ELECTRICAL PARAMETERS @25°C Part Number PP20A- Primary Inductance (μH MIN) Leakage Inductance (μH MAX) DC Resistance (mΩ MAX) Turns Ratio Isolation (VDC) Figure Primary Secondary Primary Secondary A Aux 0601 58 0.30 15 55 0.6//0.6 6T 1T // 1T 1500 A 0602 58 0.30 15 55 0.6+0.6 6T 1T+1T 1500 A 0603 58 0.30 15 55 2.00 6T 3T 1500 B 0606 58 0.30 30 110 8.00 6T 6T 1500 C 0608 58 0.25 30 110 12.0 6T 8T 1500 C 0610 58 0.25 30 110 18.0 6T 10T 1500 C 1201 230 0.90 55 180 0.6//0.6 12T 1T // 1T 1500 A 1202 230 0.90 55 180 0.6+0.6 12T 1T+1T 1500 A 1203 230 0.90 55 180 2.00 12T 3T 1500 B 1206 230 0.70 110 360 8.00 12T 6T 1500 C 1208 230 0.70 110 360 12.0 12T 8T 1500 C 1210 230 0.70 110 360 18.0 12T 10T 1500 C Product performance is limited to specified parameters. Data is subject to change without prior notice. PLANAR TRANSFORMERS HIGH FREQUENCY 100 WATT APPLICATION OF CONFIGURATION APPLICATION OF CONFIGURATION Part Number PP20A- Vin Vout / Iout Part Number PP20A- Vin Vout / Iout 0603 18 – 36 Vdc 5.0 V @ 20 A 1203 36 – 75 Vdc 5.0 V @ 20 A 0608 18 – 36 Vdc 12V@8.33A -- 15V@6.67A 1208 36 – 75 Vdc 12V@8.33A -- 15V@6.67A 0610 18 – 36 Vdc 16V@6.25A -- 18V@5.56A 1210 36 – 75 Vdc 16V@6.25A -- 18V@5.56A NOTES: 1. The inductance is measured in primary windings Pin (2-5). 2. The leakage inductance is measured in primary winding Pin (2 -5) with all other windings shorted.

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 DIMENSIONS (mm) SCHEMATICS Figure A Figure B Figure C SUGGESTED PAD LAYOUT PP20A SERIES PLANAR TRANSFORMERS HIGH FREQUENCY 100 WATT