PP18D MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com PP18D SERIES

  • Power Rating Up to 30 Watts
  • High Efficiency
  • Footprint 19.6 mm X 18.0 mm
  • Lower Profile of 7.4 mm
  • High Isolation (operational) 1500 Vdc
  • High Frequency 300 KHz – 3.0 MHz
  • Operating Temperature -40ºC to +125ºC
  • Custom Design Available ELECTRICAL PARAMETERS @25°C Part Number PP18D- Primary Inductance (μH MIN) Leakage Inductance (μH MAX) DC Resistance (mΩ MAX) Turns Ratio Isolation (VDC) Figure Primary Secondary Primary Secondary 0601 48 0.50 50.0 1.50 6T 1T // 1T 1500 A 0602 48 0.50 50.0 3.00 6T 1T+1T 1500 A 0603 48 0.40 50.0 20.0 6T 3T 1500 B 0606 48 0.40 50.0 40.0 6T 6T 1500 C 0608 48 0.30 50.0 60.0 6T 8T 1500 C 0610 48 0.30 50.0 80.0 6T 10T 1500 C 1201 190 1.50 156 1.50 12T 1T // 1T 1500 A 1202 190 1.50 156 3.00 12T 1T+1T 1500 A 1203 190 1.30 156 20.0 12T 3T 1500 B 1206 190 1.30 156 40.0 12T 6T 1500 C 1208 190 1.15 156 60.0 12T 8T 1500 C 1210 190 1.15 156 80.0 12T 10T 1500 C Product performance is limited to specified parameters. Data is subject to change without prior notice. PLANAR TRANSFORMERS HIGH FREQUENCY 30 WATT APPLICATION OF CONFIGURATION APPLICATION OF CONFIGURATION Part Number PP18D- Vin Vout / Iout Part Number PP18D- Vin Vout / Iout 0603 18 – 36 Vdc 5.0 V @ 6 A 1203 36 – 75 Vdc 5.0 V @ 6 A 0608 18 – 36 Vdc 12V@2.50A -- 15V@2.00A 1208 36 – 75 Vdc 12V@2.50A -- 15V@2.00A 0610 18 – 36 Vdc 16V@1.88A -- 18V@1.67A 1210 36 – 75 Vdc 16V@1.88A -- 18V@1.67A NOTES: 1. The inductance is measured in primary windings Pin (1-2) at 100 KHz 100 mVrms. 2. The leakage inductance is measured in primary winding Pin (1 -2) with all other windings shorted.

Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 DIMENSIONS (mm) SCHEMATICS Figure A Figure B Figure C SUGGESTED PAD LAYOUT PP18D SERIES PLANAR TRANSFORMERS HIGH FREQUENCY 30 WATT