PNT MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: PNT PNT SPECIFICATIONS ES-3230 Rev.4 Page 1/2 http://www.m-system.co.jp/ Plug-in Signal Conditioners M-UNIT 2-WIRE ANGLE SENSOR TRANSMITTER Functions & Features
- Converting a voltage input from Angle Sensor (model: NRA) into a standard process signal proportional to the angle
- Compact 2-wire design Typical Applications
- Tank levels
- Positions (2.60)67 (2.64) (1.06) mm (inch) MODEL: PNT-[1]
ORDERING INFORMATION
- Code number: PNT-[1] Specify a code from below for [1]. (e.g. PNT-1) [1] ACTION 1: Direct (output increases with input increase) 2: Reverse (output increases with input decrease)
RELATED PRODUCTS
- Brushless angle sensor (model: NRA) GENERAL SPECIFICATIONS Construction: Flat box Connection: M4 screw terminals (torque 1.2 N·m) Screw terminal: Nickel-plated brass Housing material: Flame-resistant resin (black) Zero adjustments: 45 – 55 % of linearity-assured range of the angle sensor The Zero indicates such input where the transmitter outputs 12 mA. Span adjustments: 50 – 100 % of linearity-assured range of the angle sensor INPUT SPECIFICATIONS Input: 2 – 3 V DC (output from Angle Sensor) Excitation: 5 V DC ±0.5 % OUTPUT SPECIFICATIONS Output: 4 – 20 mA DC Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance) 10 12 15 20 25 28 200 400 600 800 LOAD RESISTANCE [Ω ] SUPPLY VOLTAGE [V ] (600Ω maximum at 24V DC) INSTALLATION Supply voltage: 12 – 28 V DC Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface Weight: 100 g (0.22 lb) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %)
MODEL: PNT PNT SPECIFICATIONS ES-3230 Rev.4 Page 2/2 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) SPAN ZERO 7.5 (.30) 66 (2.60) 55 (2.17) 8 (.31) 5.5 (.22) 2–4.5 (.18) dia. MTG HOLE 6–M4 SCREW TERMINAL
- When mounting, no extra space is needed between units. 6 5 4 3 2 1 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Low Drift Amplifier Output Driver SZ3 EXC. INPUT COM red yellow white Excitation SupplyAngle Sensor (model: NRA) LOADOUTPUT 4 – 20mA DC 24V DC Specifications are subject to change without notice.