PNC113 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

ADVAN CED S WITCHING SO LUTIONS

FEATURES

Normally closed contactor for capacitor dischar ge and other dump switch applications r equiring normally closed contacts Small, low cost solution for HVDC Dischar ge applications Designed to meet CE Conformance standar ds Not position sensitive – can be mounted in any position for ease of installation Designed and manufactured in Carpinteria, CA USA Rev C 16-MAR-2022

Contact Arrangement Form Y SPST-NC Dielectric at Sea Level Vrms 4300 Contact Voltage, Operating Max Vdc 1500 Continuous Current Carry, Max (8 AWG) @ 25°C A 30 Continuous Current Carry, Max (8 AWG) @ 65°C A 15 Electrical Life (Resistive Load) Make and Break, 20A @ 400Vdc Cycles 6000 Mechanical Life Cycles 100,000 Contact Voltage Drop, Max @ 50A mV 100 Contact Resistance, Max @ 30A (after 30 sec) mOhms 5 Operate Time, Max ms 25 Release Time, Max ms 8 Vibration, Sinusoidal (50-200Hz Peak) G 3 Shock, Operating, 1/2 Sine, 11ms G 5 Temperature, Operating Range 1/ °C -40° to +65° Humidity, No Freezing or Condensing at Low Temperature RH 5% to 85% Weight grams 135 Short Circuit Current Withstanding (5ms) A 400 Impulse Withstand Voltage: IEC61000-4-4 (500 ohm) kV 6 COIL RATINGS @ 25°C 2/ Coil P/N Designation B C F Coil Voltage, Nominal 12 Vdc 24 Vdc 48 Vdc Coil Voltage, Max 16 Vdc 32 Vdc 64 Vdc Pick-up Voltage, Max 7.5 Vdc 15 Vdc 30 Vdc Drop Out Voltage, Max 5 Vdc 9 Vdc 18 Vdc Drop Out Voltage, Min 0.20 Vdc 0.40 Vdc 0.80 Vdc Coil Resistance, +/-10% 70 Ohms 280 Ohms 1092 Ohms Coil Current at Nominal Voltage 0.170 A 0.085 A 0.045 A Recommended External Coil Suppression (not included) SMAJ40CA or P6KE47CA-E3/54 SMAJ40CA or P6KE47CA-E3/54 SMAJ100CA or P6KE120CA POWER SWITCHING AND CURRENT CARRY RATINGS 500 5,000 50,000 0 5 10 15 20 25 30 CYCLES CURRENT (A) 100V 400V 800V 1000V 1500V DC RESISTIVE CLOSING CYCLE ESTIMATES (MAKE ONLY) 100 1,000 10,000 0 50 100 150 200 TIME (sec) CURRENT (A) CURRENT CARRY vs TIME with 65ºC terminal temperature rise #8AWG conductor ADVAN CED S WITCHING SO LUTIONS PNC113PNC113 Normally Closed MiniTACTOR TM

5.33 .210 53.95 2.124 1.351 34.32 Coil Terminals: 2X M3 Studs Power Terminals: 2X M4 Studs 71.9 2.83 36.50 1.437 21.2 .83 81.28 3.200 .183 4.64 .500 12.70 4X 36.98 1.456 1.305 33.14 5.33 .210 53.95 2.124 1.351 34.32 Coil Terminals: 2X M3 Studs Power Terminals: 2X M4 Studs 71.9 2.83 36.50 1.437 21.2 .83 81.28 3.200 .183 4.64 .500 12.70 4X 36.98 1.456 1.305 33.14 5.33 .210 53.95 2.124 1.351 34.32 Coil Terminals: 2X M3 Studs Power Terminals: 2X M4 Studs 71.9 2.83 36.50 1.437 21.2 .83 81.28 3.200 .183 4.64 .500 12.70 4X 36.98 1.456 1.305 33.14 Mounting M4 or 8-32 Screws Torque 1.3-1.7Nm [12-15in-lb] Case Material Thermoplastic Polyester Resin Power Connection M4 Studs Torque 1.3-1.7Nm [12-15in-lb] max Coil Termination M3 Studs Torque 0.5Nm [5in-lb] max GIGAVAC® - 6382 Rose Lane, Carpinteria, CA 93013 - ph +(805) 684-8401 - fax +(805) 684-8402 info@gigavac.com - www.gigavac.com - ©Copyright 2020 GIGAVAC, LLC. PNC113PNC113 Normally Closed MiniTACTOR TM

Notes & Definitions: 1/ Temperature range refers to ambient conditions. Terminal temperature can exceed listed values. 2/ Contactor is operated by a coil that changes resistance with temperature. Since pick-up current, coil current and coil power are specified at nominal voltage, they will be lower than indicated at temperatures above 25°C and higher than indicated at temperatures below 25°C. Similarly, pick-up and drop-out voltages will be higher than indicated at temperatures above 25°C and lower than indicated at temperatures below 25°C. APPLICATION NOTES Electrical life rating is based on resistive load with 27μH maximum inductance in circuit. Because your application may be different, we suggest you test the contactor in your circuit to verify life is as required. Contactor is bi-directional and therefore can carry, make, and break current in both directions. Contactor is not sensitive to direction of installation and can be mounted in any position or axis. PART NUMBER SYSTEM PNC113 B D A Coil Voltage B=12 Vdc C=24 Vdc F=48 Vdc Coil Terminals D=Studs, M3 Power Terminals A=Studs, M4 GIGAVAC® - 6382 Rose Lane, Carpinteria, CA 93013 - ph +(805) 684-8401 - fax +(805) 684-8402 info@gigavac.com - www.gigavac.com - ©Copyright 2020 GIGAVAC, LLC. PNC113PNC113 Normally Closed MiniTACTOR TM

Copyright © 2023 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS- RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Regional head offices: United States of America Sensata Technologies Attleboro, MA Phone: 508-236-3800 E-mail: support@sensata.com Netherlands Sensata Technologies Holland B.V. Hengelo Phone: +31 74 357 8000 E-mail: support@sensata.com China Sensata Technologies China Co., Ltd. Shanghai Phone: +8621 2306 1500 E-mail: support@sensata.com CONTACT US sensata.com