PN7 MOBILEMARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com US Office & Headquarters: 1140 W Thorndale Ave, Itasca, IL 60143, USA UK Office: 8 Miras Business Park, Keys Park Road, Hednesford, Staffs. WS12 2FS, UK Specifications subject to change without notice (3/2014) Radome Size: 6.75” Hx 6.75” Wx 2” D (1 72 mm x1 72mm x 50 mm) Antenna Radome: Black ABS Termination: “PT” Models 1 ft (30 cm) RG-58/SMA male “N” Models Integral N female Optional Mounting: Model FL-MK mounting kit, allows PN7 mounting on forklift load backrest Shock & Vibration: EN 61373, IEEE 1478, MIL-810G TIA 329.2-C Water Ingress: IPx7
- Durable low profile design
- RF tuned for mounting directly against metal, perfect for forklift applications
- 7 dBic panel model for long range sys- tems
- Optional mounting kit adapts antenna for metal settings such as forklifts, shelv- ing, gates or racks Panel Antennas, 7 dBic RFID & ISM, Forklift Mobile Mark’s RFID Panel Antennas are perfect for RFID systems, as well as other applications in the ISM band. They are designed to operate in close proximity to metal, which normally has a tendency to detune antennas. The PN7 Series antennas are available in circularly polarized (US models are RHCP; EU models are LHCP). With 7 dBic gain, these antennas provide significant performance improvements over a micro-sized patch. They can be mounted in any setting including directly against metal. This is useful for a variety of applications, but particularly for mounting on forklifts. Model series PN7 antennas are small 6.75” H x 6.75” W x 2”D (1 72 mm x1 72mm x 50 mm) and attractive. The antennas are provided with 4 corner holes for mounting flush to a surface. An optional kit readily accommodates mounting to the load back rest of a forklift truck for palletized scanning. The antenna is available in two styles, a direct N connector version, as well as a coaxial “Pigtail” version. The coax pigtail version is sup- plied with an SMA, other connectors can be specified at time of order Specifications Frequency: PN7-915 series 902 - 928 MHz (US) PN7-868 series 865 - 870 MHz (EU) Gain: 7 dBic maximum Axial Ratio: 3 db Max VSWR: 1.5:1 max over range Impedance: 50 Ohm nominal Maximum Power: 20 Watts Beamwidth: 70o elevation, 70o azimuth Front-to-Back ratio: 15 dB or better Operating Temp: -40oC to +85oC Mounting: 4 Hole Corner Mount, Weight: 1.1 lbs (0.5 kg) to match your application. Jumper cables can also be provided for either version to accommodate a variety of installations. The PN7 Series has a DC shorted front end and is compatible with antenna sensing circuits found in the current generation of RFID read- ers. If your reader has a feature that requires a 10K ohm resistor, the PN7 antenna can be special ordered with this feature. Model # Description PN7-915-BLK US 902-928 MHz, integral N PN7-915PT-1C-BLK-12 US 902-928 MHz, pigtail PN7-868-BLK EU 865 - 870 MHz, integral N PN7-868PT-1C-BLK-12 EU 865 - 870 MHz, pigtail FL-MK Fork lift mounting kit optional For special configurations, please contact your sales representative PN7 Series Fork Lift Mount Kit PN7 Series with Integral N PN7 Serieswith pigtail