PN6-915 MOBILEMARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com Specifications subject to change without notice (9/2018)
- Weatherproof radome; in-building or outdoor coverage use
- 6 dBi gain for 915 RFID (US), 868 RFID (EU), and 915 ISM
- Available in Right Hand and Left Hand Circularly Polarized (CP) Panel Antennas, 6 dBic, RFID & ISM Model # Description PN6-915RCP-1C-WHT-6 RHCP for US RFID PN6-915LCP-1C-WHT-6 LHCP for US RFID PN6-868LCP-1C-WHT-6 LHCP for EU RFID PN6-868RCP-1C-WHT-6 RHCP for EU RFID Add -FV for a Velcro mount optional Add -FT for a Tape mount optional For other connector & cable configurations, please contact your sales representative PN6-915 Patch Swivel Mounting Bracket Lightning Protection: External recommended Antenna Radome: White ASA Mounting: Standard Swivel Wall/pole mounting with hose clamp Velcro optional Flat backing plate w/ Velcro Tape optional Flat backing plate w/ Tape Radome Size: 5.75” Hx 5.75” Wx 0.7” D (14.6 cm x14.6 cm x 1.8 cm) Weight: 1.1 lbs (0.5 kg) Termination: 6”(15.2cm) RG-58/SMA Plug Shock & Vibration: EN 61373, IEEE 1478, MIL-810G Water Ingress IPx5 Specifications Frequency: PN6-915 Series 902 - 928 MHz PN6-868 Series 865 - 870 MHz Gain: PN6-915 Series 6 dBic PN6-868 Series 5 dBic Axial Ratio: 3 db Max VSWR: 2:1 max over range Impedance: 50 Ohm nominal Maximum Power: 10 Watts Beamwidth: 80 o elevation, 80o azimuth Front-to-Back ratio: 10 dB Operating Temp: -40oC to +85oC Mobile Mark’s PN6 Series antennas have been a popular solution for many RFID systems. These mid-gain antennas are ideal for systems where the tags read are neither too close not too far from the reader. The PN6-915 antennas have also been used for applications in the ISM 915 band. The PN6 Series antennas are available as either circularly polarized righthand or lefthand. With 5.5 dBic gain, these antennas can provide an improvement in system performance over micro sized patch. For RFID applications, these antennas are typically used for mid-range reader applications, portals and conveyor belts. These patch antennas are small 5.75 in, (14.6 cm) square and attractive. When mounted on a wall the compact mounting configuration only requires a maximum of 2.7 inch (6.9 cm) clearance. The radome is a durable ASA material, finished in white. The standard mounting hardware provided includes a swivel wall mount and a stainless steel clamp for pole mounting. Other options include a tape or velcro mount. The antenna terminates with 6 (15.2 cm) inches of RG-58 cable and SMA Plug (Male) connector. Longer lengths are available, please consult your sales representative. The PN6 Series has a DC shorted front end and is compatible with antenna sensing circuits found in the current generation of RFID read- ers. If your reader has a feature that requires a 10K Ohm resistor, the PN6 antenna can be special ordered with this feature.