PN4354

PN4354 CDIL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PNP SILICON PLANAR EPITAXIAL TRANSISTORS PN4354 PN4355 PN4356 TO-92 Plastic Package General Purpose Amplifiers DESCRIPTION SYMBOL 4354 4355 4356 UNITS Collector Emitter Voltage VCEO 60 60 80 V Collector Base Voltage VCBO 60 60 80 V Emitter Base Voltage VEBO 5V Collector Current - Continuous IC 500 mA Power Dissipation@Ta=25°C PD 625 mW Power Dissipation@ Tc=25°C PD 1.0 mW Operating And Storage Junction Tj, Tstg -55 to +150 °C Temperature Range ELECTRICAL CHARACTERISTICS (Ta=25°C Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION 4354 4355 4356 UNITS Collector Emitter Voltage VCEO(sus)* IC=10mA,IB=0 (pulsed) >60 >60 >80 V Collector Base Voltage VCBO IC=10uA,IE=0 >60 >60 >80 V Emitter Base Voltage VEBO IE=10uA,IC=0 >5 V Collector-Cut off Current ICBO VCB=50V, IE = 0 <50 nA VcB=50V, IE = 0, Ta =75°C <5 uA Emitter Cut off Current IEBO VBE =4V,IC= 0 <100 nA DC Current Gain hFE *V CE=10V,IC=100uA >25 >60 >25 VCE=10V,IC=1mA >40 >75 >40 VCE=10V,IC=10mA 50-500 100-400 50-250 VCE=10V,IC=100mA >40 >75 >40 VCE=10V,IC=500mA >30 >75 >30 Commom Emitter Small f=100MHz Collector Emitter Sat Voltage VCE(sat) * I C=150mA,IB=15mA <0.15 <0.15 <0.15 V IC=500mA,IB=50mA <0.5 <0.5 <0.5 V PN4355 IC=1A,IB=100mA <1.0 V Continental Device India Limited Data Sheet Page 1 of 4 E B C Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company

PNP SILICON PLANAR EPITAXIAL TRANSISTORS PN4354 PN4355 PN4356 TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25°C Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION 4354 4355 4356 UNITS Base Emitter Sat Voltage VBE(sat)* IC=150mA,IB=15mA <0.9 <0.9 <0.9 V IC=500mA,IB=50mA <1.1 <1.1 <1.1 V IC=1A,IB=100mA <1.2 V PN4355 VBE(on)* IC=500mA,VCE=0.5V <1.1 <1.1 <1.1 V Base Emitter On Voltage IC=1A,VCE=1V <1.2 V PN4355 SMALL-SIGNAL SYMBOL TEST CONDITION 4354 4355 4356 UNITS DYNAMIC CHARACTERISTICS Ccb IE=0, VCB=10V, <30 <30 <30 PF Collector to Base Capacitance f=1.0MHZ Ceb IC=0, VEB=0.5V, <110 <110 <110 PF Emitter to Base Capacitance f=1.0MHZ ton IC =500mA,IB1 =50mA, <100 <100 <100 PF Turn On Time VCC =30V toff IC =500mA,IB1=IB2 =50mA, Turn off Time VCC =30V <400 <400 <400 ns Noise Figure NF VCE =10V,IC=100uA <3.0 <3.0 <3.0 dB RS=1KΩ ,f=1kHZ, BW = 1HZ *Pulse Condition: = 300us, Duty Cycle = 1%. Continental Device India Limited Data Sheet Page 2 of 4 E B C

TO-92 Transistors on Tape and Ammo Pack TO-92 Bulk TO-92 T&A 1K/polybag 2K/ammo box 200 gm/1K pcs 645 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 5.0K 2.0K 17" x 15" x 13.5" 17" x 15" x 13.5" 80.0K 32.0K 23 kgs 12.5 kgs PACKAGE Net Weight/QtyDetails STANDARD PACK INNER CARTON BOX Qty OUTER CARTON BOX Qty Gr WtSize Size Packing Detail CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH TO BE MEASURED AT BOTTOM OF CLINCH AT TOP OF BODY t1 0.3 - 0.6 BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, CLINCH HEIGHT PULL - OUT FORCE ITEM A T P Po F h W Wo Ho L Do t (P) SYMBOL SPECIFICATION 4.0 4.8 3.9 MIN. 12.7 12.7 6.35 5.08 0.5 2.54 NOM. 4.8 5.2 4.2 23.25 11.0 1.2 MAX. ±0.3 ±0.4 +0.6 -0.2 ±0.5 ±0.2 +0.7 -0.5 ±0.2 ±0.5 ±0.2 +0.4 -0.1 TOL . REMARKS NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL N OT INTERFERE WITH THE SPROCKET FEED H OLES. All dimensions in mm unless specified otherwise Ammo Pack Style Adhesive Tape on Top Side FLAT SIDE MECHANICAL DAT A T t F1 F2 F Po Do (p) Wo W1 W A P L Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack LABEL Carrier Strip 8.2" 13" FEED 1.77" hh B 3 2 1 AK ED A A SEC AAG D F F H C3 2 1 3 2 1 All diminsions in mm. DIM MIN. MAX. A 4.32 5.33 B 4.45 5.20 C 3.18 4.19 D 0.41 0.55 E 0.35 0.50 F5 D E G G 1.14 1.40 H 1.14 1.53 K 12.70 — PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER Continental Device India Limited Data Sheet Page 3 of 4

PN4354_56REV081001 Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CDare believedtobeaccurateandreliable.CDILhowever,doesnotassumeresponsibilityforinaccuraciesorincomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notic e. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 Continental Device India Limited Data Sheet Page 4 of 4