PN2222 CDIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NPN SILICON PLANAR SWITCHING TRANSISTORS PN2222 PN2222A CBE TO-92 Com plementary Silicon Transistors For Switching And Linear Applications DC Am plifier & Driver For Industrial Applications. ABSOLUTE MAXIMUM RATINGS(Ta=25deg C unless otherwise specified) DESCRIPTION SYMBOL 2222 2222A UNIT Collector -Emitter Voltage VCEO 30 40 V Collector -Base Voltage VCBO 60 75 V Emitter -Base Voltage VEBO 5.0 6.0 V Collector Current Continuous IC mA Power Dissipation @Ta=25 degC PD mW Derate Above 25deg C mW/deg C @ Tc=25 degCPD W Derate Above 25deg C mW/deg C Operating And Storage Junction Tj, Tstg deg C Temperature Range THERMAL RESISTANCE Junction to Case Rth(j-c) deg C/W Junction to Ambient Rth(j-a) deg C/W ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified) DESCRIPTION SYMBOL TEST CONDITION 2222 2222A UNIT Collector -Emitter Voltage VCEO IC=10mA,IB=0 >30 >40 V Collector -Base Voltage VCBO IC=10uA.IE=0 >60 >75 V Emitter-Base Voltage VEBO IE=10uA, IC=0 >5.0 >6.0 V Collector-Cut off Current ICBO VCB=50V, IE=0 <10 - nA VCB=60V, IE=0 - <10 nA Ta=150 deg C VCB=50V, IE=0 <10 - uA VCB=60V, IE=0 - <10 uA ICEX VCE=60V, VBE=3V - <10 nA ICEO VCE=10V, IB=0 <10 <10 nA Emitter-Cut off Current IEBO VEB=3V, IC=0 - <10 nA Base-Cut off Current IBEX VCE=60V, VBE=3V - <20 nA Collector Emitter Saturation VoltageVCE(Sat)* IC=150mA,IB=15mA <0.4 <0.3 V IC=500mA,IB=50mA <1.6 <1.0 V Base Emitter Saturation Voltage VBE(Sat) * IC=150mA,IB=15mA <1.3 0.6-1.2 V IC=500mA,IB=50mA <2.6 <2.0 V 600 625 1.5 -55 to +150 83.3 200 Continental Device India Limited Data Sheet Page 1 of 4 E B C Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company

ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified) PN2222, PN2222A DESCRIPTION SYMBOL TEST CONDITION 2222 2222A UNIT DC Current Gain hFE IC=0.1mA,VCE=10V >35 >35 IC=1mA,VCE=10V >50 >50 IC=10mA,VCE=10V >75 >75 IC=10mA,VCE=10V - >35 Ta=55 deg C IC=150mA,VCE=10V 100-300 100-300 IC=150mA,VCE=1V >50 >50 IC=500mA,VCE=10V >30 >40 DYNAMIC CHARACTERISTICS ALL f=1kHz Small Signal Current Gain hfe IC=1mA, VCE=10V - 50-300 IC=10mA, VCE=10V - 75-375 Input Inpedence hie IC=1mA, VCE=10V - 2.0-8.0 kohms IC=10mA, VCE=10V - 0.25-1.25 Voltage Feedback Ratio hre IC=1mA, VCE=10V - 8.0 x 10-4 IC=10mA, VCE=10V - 4.0 Out put Adimttance hoe IC=1mA, VCE=10V - 5.0-35 umhos IC=10mA, VCE=10V 25-200 Collector Base Time Constant rb'Cc IE=20mA, VCB=20V - <150 ps f=31.8MHz Noise Figure NF IC=100uA, VCE=10V - <4.0 dB Rs=1kohms, f=1kHz DYNAMIC CHARACTERISTICS Transistors Frequency ft IC=20mA, VCE=20V >250 >300 MHz f=100MHz Out-Put Capacitance Cob VCB=10V, IE=0 <8.0 <8.0 pF f=1MHz Input Capacitance Cib VEB=0.5V, IC=0 <30 <25 pF f=1MHz SWITCHING Time Delay time td IC=150mA,IB1=15mA <10 ns Rise time tr VCC=30V,VBE=0.5V - <25 ns Storage time ts IC=150mA, IB1= <225 ns Fall time tf IB2=15mA, VCC=30V - <60 ns *Pulse Condition: Length =300us, Duty Cycle=2% Continental Device India Limited Data Sheet Page 2 of 4

TO-92 Transistors on Tape and Ammo Pack TO-92 Plastic Package TO-92 Bulk TO-92 T&A 1K/polybag 2K/ammo box 200 gm/1K pcs 645 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 5.0K 2.0K 17" x 15" x 13.5" 17" x 15" x 13.5" 80.0K 32.0K 23 kgs 12.5 kgs PACKAGE Net Weight/QtyDetails STANDARD PACK INNER CARTON BOX Qty OUTER CARTON BOX Qty Gr WtSize Size Packing Detail CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH TO BE MEASURED AT BOTTOM OF CLINCH AT TOP OF BODY t1 0.3 - 0.6 BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, CLINCH HEIGHT PULL - OUT FORCE ITEM A T P Po F h W Wo Ho L Do t (P) SYMBOL SPECIFICATION 4.0 4.8 3.9 MIN. 12.7 12.7 6.35 5.08 0.5 2.54 NOM. 4.8 5.2 4.2 23.25 11.0 1.2 MAX. ±0. 3 ±0. 4 +0.6 -0.2 ±0. 5 ±0. 2 +0.7 -0.5 ±0. 2 ±0. 5 ±0. 2 +0.4 -0.1 TOL . REMARKS NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXI MUM NON-CUMULATI VE VARI ATI ON BETWEEN T APE FEED HOLES SHALL NOT EXCEED 1 mm I N 20 PITCH ES . 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSI NG COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. All dimensions in mm unless specified otherwise Ammo Pack Style Adhesive Ta pe on T o p Side FLAT SIDE MECHANI CAL DATA T t F1 F2 F Po Do (p) Wo W1 W A P L Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack LABEL Carr ier Strip 8.2" 13" FEED 1.77" hh B 3 2 1 AK ED A A SEC AAG D F F H C3 2 1 3 2 1 All diminsions in mm. DIM MIN. MAX. A 4.32 5.33 B 4.45 5.20 C 3.18 4.19 D 0.41 0.55 E 0.35 0.50 F5 D E G G 1.14 1.40 H 1.14 1.53 K 12.70 — PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER Continental Device India Limited Data Sheet Page 3 of 4

The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completelyreview our Data Sheet(s) so as to confirm that theDevice(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDILdoes not assumeliabilitywhatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patentrights nor rights of others.These products are not designed for use in life saving/support appliances or systems. CDIL customers sellingthese products (either as individual Discrete Semiconductor Devices or incorporated in their endproducts), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 email@cdil.com www.cdilsemi.com Continental Device India Limited Data Sheet Page 4 of 4