PN100 CDIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PNP SILICON PLANAR EPITAXIAL TRANSISTORS PN200 PN200A TO-92 Plastic Package COMPLEMENTARY PN100, PN100A ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) Collector Emitter Voltage V Collector Base Voltage V Emitter Base Voltage V Collector Current Continuous mA Power Dissipation @ Ta=25ºC mW Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to Ambient in free air ºC/W ELECTRICAL CHARACTERISTICS (Ta=25ºC unless otherwise specified) MIN MAX Collector Emitter Breakdown Voltage BVCEO* IC=1mA,IB=0 35 V Collector Base Breakdown Voltage BVCBO IC=100µA,IE=0 60 V Emitter Base Breakdown Voltage BVEBO IE=100µA, IC=0 5 V Base Cut off Current ICBO VCB=35V, IE = 0 500 nA Collector Emitter Saturation Voltage VCE(sat)* IC=150mA, IB=15mA 0.4 V PN100, A IC=500mA, IB=50mA 1.0 V PN200, A 2.0 V Base Emitter Saturation Voltage VBE(sat)* IC=150mA, IB=15mA 0.95 V PN100, A IC=500mA, IB=50mA 1.2 V PN200, A 1.3 V *Pulse Condition: = Width < 300mms, Duty Cycle < 2%. ºC 200 UNITS -55 to +150 DESCRIPTION SYMBOL TEST CONDITION VALUE Tj, Tstg Rth(j-a) DESCRIPTION VALUESYMBOL 625PD 500 VCEO VCBO VEBO IC UNITS E B C Continental Device India Limited Data Sheet Page 1 of 4 Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company

PNP SILICON PLANAR EPITAXIAL TRANSISTORS PN200 PN200A TO-92 Plastic Package COMPLEMENTARY PN100, PN100A ELECTRICAL CHARACTERISTICS (Ta=25ºC unless otherwise specified) DC Current Gain hFE* IC=1mA, VCE=1V >40 >40 >40 >40 IC=10mA, VCE=1V 100-450 300-600 100-450 300-600 IC=150mA, VCE=1V* >100 >100 IC=150mA, VCE=2V* >100 >100 DYNAMIC CHARACTERISTICS Transition Frequency fT IC=20mA, VCE=10V f=100MHz PN100, A >200 MHz PN200, A >150 MHz *Pulse Condition: = Width < 300mms, Duty Cycle < 2%. DESCRIPTION SYMBOL TEST CONDITION PN200APN100 PN100A PN200 E B C Continental Device India Limited Data Sheet Page 2 of 4

TO-92 Transistors in Tape and Ammo Pack TO-92 Bulk TO-92 T&A 1K/polybag 2K/ammo box 200 gm/1K pcs 645 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 17" x 15" x 13.5" 17" x 15" x 13.5" 80K 32K 23 kgs 12.5 kgs PACKAGE Net Weight/QtyDetails STANDARD PACK INNER CARTON BOX Qty OUTER CARTON BOX Qty Gr WtSize Size Packing Detail All diminsions in mm. DIM MIN. MAX. A 4.32 5.33 B 4.45 5.20 C 3.18 4.19 D 0.41 0.55 E 0.35 0.50 F 5 DEG G 1.14 1.40 H 1.14 1.53 2.082 K L 12.70 1.982 PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER 123 E SEC AA D B A LSolderability Ensured Dimension With 'L' UncontrolledBeyond 'L' K D A A G F F H C3 2 1 Mechanical Data T A P (p) C2 W2 DoF2 F Po W1Wo W H2H3 L t Ho h1 h1 hh ITEM SYMBOL SPECIFICATION PULL - OUT FORCE (P) 6N MIN. NOM. BODY WIDTH A1 4.0 4.8 BODY HEIGHT A 4.8 5.2 BODY THICKNESS T 3.9 4.2 AT TOP OF BODYCOMPONENT ALIGNMENT SIDE VIEW h 0 1.0 AT TOP OF BODYCOMPONENT ALIGNMENT FRONT VIEW h1 0 1.3 COMPONENT HEIGHT H1 23.25 LENGTH OF SNIPPED LEADS L 11.0 t1 0.3-0.6TOTAL TAPE THICKNESS t 1.2 CLINCH HEIGHT H3 3.0 LEAD PARALLELISM | C1 - C2 | 0.22 MAX. PITCH OF COMPONENT P 12.7 ± 1.0 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCHFEED HOLE PITCH Po 12.7 ± 0.3 FEED HOLE CENTRE TO TO BE MEASURED AT BOTTOM OF CLINCHCOMPONENT CENTRE P2 6.35 ± 0.4 DISTANCE BETWEEN OUTER LEADS F 5.08 + 0.6 - 0.2 TAPE WIDTH W 18 ± 0.5 HOLD-DOWN TAPE WIDTH Wo 6 ± 0.2 HOLE POSITION W1 9 + 0.7 - 0.5 HOLD-DOWN TAPE POSITION W2 0.5 ± 0.2 LEAD WIRE CLINCH HEIGHT Ho 16 ± 0.5 FEED HOLE DIAMETER Do 4 ± 0.2 LEAD - TO - LEAD DISTANCE F1, F2 2.54 + 0.4 STAND OFF H2 0.45 1.45 TOL . REMARKS NOTES 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. 6. Splices should not interfere with the sprocket feed holes. - 0.1 Adhesive Tape on Top Side Flat side Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack Label Carrier Strip 186 (7.3") 332 (13") FEED 43(1.7") Ammo Pack Style All dimensions in mm Continental Device India Limited Data Sheet Page 3 of 4

PN100_200_A Rev270302D Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionalityparameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail sales@cdil.com www.cdil.com Continental Device India Limited Data Sheet Page 4 of 4