PMT-24V200W1ANB

PMT-24V200W1AMB DELTA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) PMT Highlights & Features

• AC input voltage range selectable by switch
• Full Aluminium casing for light weight and corrosion resistant handling
• Convection cooling
• Cold start -20°C at 100% load (200W)
• Low leakage current < 0.25mA @ 240Vac
• High MTBF > 700,000 hrs. as per Telcordia SR-332
• Short Circuit / Overvoltage / Overcurrent / Over Temperature Protections Safety Standards CB Certified for worldwide use Model Number: PMT-24V200W1A☐☐ Unit Weight: 0.63 kg (1.39 lb) Dimensions (L x W x D): 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) General Description The new PMT series of panel mount power supplies is the latest offering from one of the world’s largest power supply manufacturers and solution providers - Delta. The product offers a wide operating temperature range from -10°C to + 60°C and can withstand shock and vibration requirements (in accordance to IEC 60068-2-27 and IEC 60068-2-6 respectively). In addition to features like overvoltage and overload protections, Delta’s PMT series of panel mount power supplies is unlike many other brands in the same price level. The PMT series is designed for cost competitive markets without compromising the quality of the components and product specifications . The series of products has an expected life time of 10 years. This versatile series has two different connector options (Terminal Block and Front Face) and can also be converted into L Frame (PML) type of power supplies to satisfy different application needs. Model Information PMT Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-24V200W1A☐☐ 90-132Vac, 180-264Vac (Selectable by Switch) 24Vdc 8.80A Model Numbering CC Code** PM □ – 24V 200W 1 A □ □ Panel Mount Product Type T – Enclosed L – L Frame* Output Voltage Output Power Single Phase No PFC Connector Type M – Terminal Block N – Front Face* B – With conformal coating *Options **For Enclosed type with Terminal Block

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Specifications Input Ratings / Characteristics Nominal Input Voltage 100-120Vac, 200-240Vac (Selectable by Switch) Input Voltage Range 90-132Vac, 180-264Vac (Selectable by Switch) Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Input Current < 4.50A @ 115Vac, < 2.50A @ 230Vac Efficiency at 100% Load > 88.5% @ 230Vac Max Inrush Current < 55A @ 230Vac Leakage Current < 0.25mA @ 240Vac Output Ratings / Characteristics* Nominal Output Voltage 24Vdc Factory Set Point Tolerance 24Vdc ± 1% Output Voltage Adjustment Range 21.6-26.4Vdc Output Current 8.80A (211.2W max.) Output Power 211.2W Line Regulation ± 0.5% typ. (@ 100-132Vac & 200-264Vac) Load Regulation ± 0.5% typ. (@ 100-132Vac & 200-264Vac ) PARD** (20MHz) < 150mVpp Rise Time 30ms typ. @ 115Vac, 20ms typ. @ 230Vac (100% load) Start-up Time 1000ms typ. @ 115Vac & 230Vac (100% load) Hold-up Time 20ms typ. @ 115Vac (100% load) 24ms typ. @ 230Vac (100% load) Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 0-100% load Start-up with Capacitive Loads 8,000µF Max *For power de-rating from 50°C to 70°C, see power de-rating on page 3. **PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1µF ceramic capacitor & 47µF electrolytic capacitor . Mechanical Case Chassis / Cover Aluminium Dimensions (L x W x D) 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) Unit Weight 0.63 kg (1.39 lb) Indicator Green LED (DC OK) Cooling System Convection Terminal PM☐-24V200W1AM☐ M3.5 x 9 Pins (Rated 300V/15A) PM☐-24V200W1AN M3.5 x 9 Pins (Rated 300V/20A) Wire AWG 22-12 Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 25dBA

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Environment Surrounding Air Temperature Operating -10°C to +60°C (Cold start at -20°C) Storage -25°C to +85°C Power De-rating > 40°C de-rate power by 2.5% / °C < 100Vac de-rate power by 3% / 1V Operating Humidity 5 to 95% RH (Non-Condensing) Operating Altitude 0 to 5,000 Meters (16,400 ft.) Shock Test Non-Operating IEC 60068-2-27, Half Sine: 50G for a duration of 11ms, 3 times for each 3 directions Vibration Non-Operating IEC 60068-2-6, Random: 5Hz to 500Hz @ 2.09Grms, 20 min per axis for all X, Y, Z direction Over Voltage Category II Pollution Degree 2 Protections Overvoltage 27.6-32.4V, Hiccup Mode, Non-Latching (Auto-Recovery) Overload / Overcurrent 105-150%, Hiccup Mode, Non-Latching (Auto-Recovery) Over Temperature Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) Internal Fuse at L pin T6.3AH Protection Against Shock Class I with PE* connection *PE: Primary Earth Reliability Data MTBF > 700,000 hrs as per Telcordia SR-332 I/P: 100Vac, O/P: 100% load, Ta: 35°C Expected Cap Life Time 10 years (115Vac & 230Vac, 50% load @ 40°C) Safety Standards / Directives Safety Entry Low Voltage SELV (EN 60950-1) Electrical Safety UL/cUL recognized CB scheme UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E131881) IEC 60950-1 Material and Parts RoHS Directive 2011/65/EU Compliant Galvanic Isolation Input to Output 3.0KVac Input to Ground 1.5KVac Output to Ground 0.5KVac

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) EMC Emissions (CE & RE) CISPR 32, EN 55032, FCC Title 47: Class A (With Delta EMI filter P/N: 10DKAW5) Immunity EN 55024 Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1) Air Discharge: 15kV Contact Discharge: 8kV Radiated Field IEC 61000-4-3 Level 2 Criteria A1) 80MHz-1GHz, 3V/M with 1kHz tone / 80% modulation Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1) 2kV Surge IEC 61000-4-5 Level 3 Criteria A1) Common Mode2): 2kV Differential Mode3): 1kV Conducted IEC 61000-4-6 Level 3 Criteria A1) 150kHz-80MHz, 3Vrms Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1) 10A/Meter Voltage Dips and Interruptions IEC 61000-4-11 100% dip; 1 cycle (20ms); Self Recoverable Low Energy Pulse Test (Ring Wave) IEC61000-4-12 Level 3 Criteria A1) Common Mode2): 2kV Differential Mode3): 1kV *Fulfills tested conditions 1) Criteria A: Normal performance within the specification limits 2) Asymmetrical: Common mode (Line to earth) 3) Symmetrical: Differential mode (Line to line) Block Diagram

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Device Description 1) Input & Output terminal block connector 2) DC voltage adjustment potentiometer 3) DC OK control LED (Green) 4) AC selectable switch Dimensions PMT-24V200W1AM☐: Terminal Block with Case Cover L x W x D: 215 x 115 x 50 mm (7.01 x 3.82 x 1.50 inch) PMT-24V200W1AM☐: Terminal Block PMT-24V200W1AN: Front Face

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) PMT-24V200W1AN: Front Face with Case Cover L x W x D: 215 x 115 x 50 mm (7.01 x 3.82 x 1.50 inch) PML-24V200W1AM: Terminal Block without Case Cover L x W x D: 215 x 115 x 50 mm (7.01 x 3.82 x 1.50 inch)

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) PML-24V200W1AN: Front Face without Case Cover L x W x D: 215 x 115 x 50 mm (7.01 x 3.82 x 1.50 inch)

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Engineering Data Output Load De-rating VS Surrounding Air Temperature Output Load De-rating VS Input Voltage Note 1. Power supply components may degrade, or be damaged, when the power supply is continuously used outside the shaded region, refer to the graph shown in Fig. 1. 2. If the output capacity is not reduced when the surrounding air temperature exceeds its specification as defined on Page 3 under “Environment”, the device will run into Over Temperature Protection. When activated, the output voltage will go into bouncing mode and will recover when the surrounding air temperature is lowered or the load is reduced as far as necessary to keep the device in working condition. 3. In order for the device to function in the manner intended, it is also necessary to keep a safety distance of 20 mm (0.79 inch) with adjacent units while the device is in operation. 4. Depending on the surrounding air temperature and output load delivered by the power supply, the device can be very hot! 5. If the device has to be mounted in any other orientation, please contact info@deltapsu.com for more details. Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation > 40°C de-rate power by 2.5% / °C  No output power de -rating for the input voltage from 100Vac to 132Vac & 200Vac to 264Vac ■ L Frame / Enclosed

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Assembly & Installation Ⓐ Side Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The power supply shall be mounted on minimum of 4 mounting holes using M4 screw of maximum 5 mm (0.20 inch) length (Refer to Fig. 4). This is to maintain a safety distance between the screw and internal components. Ⓑ Base Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The power supply shall be mounted on minimum of 4 mounting holes using M4 screw of maximum 4 mm (0.16 inch) length (Refer to Fig. 4). This is to maintain a safety distance between the screw and internal components. Ⓒ Connector Ⓓ This surface belongs to customer’s end system or panel where the power supply is mounted. Base Mounting (Horizontal) Base Mounting (Vertical) Side Mounting (Horizontal) Fig. 2 Recommended Mounting Orientations

• Use flexible cable (stranded or solid) of AWG No. 22-12. The input/output connectors’ allowable current is 23A max per pin. User should calculate and select the suitable wire specification (type/quantity/diameter) according to actual output current. The torque at Fig. 3 Mounting Hole Locations To ensure sufficient convection cooling, always maintain a distance of ≥ 20 mm (0.79 inch) from ventilated surfaces while the device is in operation. Please insert an insulation sheet between the system and product, if the safety distance is < 4mm (0.16 inch). Fig. 4 Assembly Reference  Only use M4 screw ≤ 5 mm (0.20 inch) through the base mounting holes at Ⓐ. This is to keep a safe distance between the screw and internal components.  Only use M4 screw ≤ 4 mm (0.16 inch) through the base mounting holes at Ⓑ. This is to keep a safe distance between the screw and internal components.

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Safety Instructions

• Must select correct AC input voltage before turning on (Refer to the “Device Description” on Page 5).
• If user’s mounting orientation is not according to the recommended mounting orientations, please consult Delta for further information.
• The device is not recommended to be placed on low thermal conductive surface. For example, plastics.
• To ensure sufficient convection cooling, always maintain a distance of ≥ 20 mm (0.79 inch) from ventilated surfaces while the device is in operation. Please insert an insulation sheet between the system and product, if the safety distance is < 4 mm (0.16 inch).
• Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!
• Do not touch the terminals while power is being supplied. Risk of electric shock.
• Prevent any foreign metal, particles or conductors from entering the device t hrough the openings during installation. It may cause electric shock, safety hazard, fire and/or product failure.
• Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection. The power supply must be mounted by metal screws onto a grounded metal surface. It is highly recommended that the Earth terminal on the connector be connected to the grounded metal surface. Accessories LM-01: Top Fixing Bracket This bracket is used to fix the power supply onto a flat surface from the top.

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Functions Start-up Time The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied. Rise Time The time required for the output voltage to change from 10% to 90% of its final steady state set value. Hold-up Time Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value. ■ Graph illustrating the Start-up Time, Rise Time, and Hold-up Time Inrush Current Inrush current is the peak, instantaneous, input current measured and, occurs when the input voltage is first applied. For AC input voltages, the maximum peak value of inrush current will occur during the first half cycle of the applied AC voltage. This peak value decreases exponentially during subsequent cycles of AC voltage. Dynamic Response The power supply output voltage will remains within ±5% of its steady state value, when subjected to a dynamic load from 0 to 100% of its rated current. ■ 50% duty cycle / 5Hz to 10KHz

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Overload & Overcurrent Protections (Auto-Recovery) The power supply’s Overload (OLP) and Overcurrent (OCP) Protections will be activated when output current exceeds 105- 150% of IO (Max load). In such occurrence, the VO will start to droop and once the power supply has reached its maximum power limit, the protection is activated and the power supply will go into “Hiccup mode” (Auto-Recovery). The power supply will recover once the fault condition of the OLP and OCP is removed and IO is back within the specifications. It is not recommended to prolong the duration of I O when it is <105% but >100%, since it may cause damage to the PSU. Overvoltage Protection (Auto-Recovery) The power supply’s overvoltage circuit will be activated when its internal feedback circuit fails. The output voltage shall not exceed its specifications defined on Page 3 under “Protections”. Over Temperature Protection (Auto-Recovery) As described in load de -rating section, the power supply also has Over Temperature Protection (OTP). In the event of a higher operating temperature at 100% load, the power supply will run into OTP when the operating temperature is beyond what is recommended in the de -rating graph. When activated, the output voltage will go into bouncing mode until the temperature drops to its normal operating temperature as recommended in the de-rating graph. Short Circuit Protection (Auto-Recovery) The power supply’s output OLP/OCP function also provides protection against short circuits. When a short circuit is applied, the output current will operate in “Hiccup mode”, as shown in the illustration in the OLP/OCP section on this page. The power supply will return to normal operation after the short circuit is removed.

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Operating Mode  Redundant Operation In order to ensure proper redundant operation for the power supply units (PSUs), the output voltage difference between the two units must be kept at 0.45~0.50V for these 24V supplies. Follow simple steps given below to set them up for the redundant operation: Step 1. Measure output voltage of PSU 1 and PSU 2. If PSU 1 is the master unit, then V O of PSU 1 must be higher than PSU 2. In order to set the output voltage, individually connect each power supply to 50% of rated load at any line voltage from 85-264Vac, and set the PSU 1 and PSU 2 output voltage. Step 2. Connect the power supply units PSU 1 and PSU 2 to Vin 1 & Vin 2, respectively, of the DRR-20N (or 20A) module shown on the right of above diagram. Fig. 5 Redundant Operation Connection Diagram Step 3. Connect the system load from V out. Please note that output voltage Vout from DRR module will be = VO (output voltage of power supply) – Vdrop* (in DRR module). *Vdrop will vary from 0.60V to 0.90V (Typical 0.65V) depending on the load current and surrounding air temperature.  Parallel Operation The power supply units (PSUs) can also be used for parallel operation in order to increase the output power. The difference in output voltage between the two units must be kept to within 25mV of each other. This difference must be verified with the same output load connected independently to each unit. Parameters such as EMI, inrush current, leakage current, PARD, start up time will be different from those on the datasheet, when two units are connected in parallel. The user will need to verify that any differences will still allow the two power supplies connected in parallel will work properly in their product/application. Fig. 6 Parallel Operation Connection Diagram LOAD Terminal DC OK Signal Terminal N + Output PSU 1 + Output PSU 2 – Common Signal KEY L (L1) N (L2) PE PSU 2PSU 1 DRR-20N or DRR-20A Com

PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A□□ All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (November 2018, Rev. 03) Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EU limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment. RoHS is the abbreviation for “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. This product conforms to this standard. Attention Delta provides all information in the datasheets on an “AS IS” basis and does not offer any kind of warranty through the information for using the product. In the event of any discrepancy between the information in the catalog and datasheets, the datasheets shall prevail (please refer to www.DeltaPSU.com for the latest datasheets information). Delta shall have no liability of indemnification for any claim or action arising from any error for the provided information in the datasheets. Customer shall take its responsibility for evaluation of using the product before placing an order with Delta. Delta reserves the right to make changes to the information described in the datasheets without notice.