PMR_V02 ROHM

Document overview

Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
PDF pages: 10

Technical content

Features 1) Ultra low-ohmic resistance range (1mΩ ~ ) 2) Improved current detection accuracy by trimming-less structure. 3) Special low resistance temperature coefficient. 4) The unique chip structure minimizes thermal stress during temperature cycling, resulting in greater reliability. 5) ROHM resistors have obtained ISO9001 / IATF16949 certification. 6) Corresponds to AEC-Q200.
Products list ∗ Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it.
Part Number Description Datasheet PMR HZP J V 2L0 Part No. Packaging specifications code Resistance tolerance Special part code 10 (2012)[0805] 18 (3216)[1206] F J 25 (3225)[1210] 1mΩ 1L00 1L0 50 (5025)[2010] 2mΩ 2L00 2L0 100 (6432)[2512] 3mΩ 3L00 3L0 4mΩ 4L00 4L0 5mΩ 5L00 5L0 6mΩ 6L00 6L0 7mΩ 7L00 7L0 8mΩ 8L00 8L0 9mΩ 9L00 9L0 10mΩ 10L0 10L Size (mm)[inch] Embossed tape (2mm pitch) Nominal resistance Resistance code, 3 or 4 digits. Resistance value Resistance tolerance PMR03 EZP 5,000 PMR10 EZP 5,000 Paper tape (4mm pitch) Paper tape (4mm pitch) PMR18 EZP 5,000 PMR25 HZP 2,000 Paper tape (4mm pitch) Embossed tape (4mm pitch) PMR50 HZP 2,000 PMR100 HZP 2,000 Embossed tape (4mm pitch) Embossed tape (4mm pitch) (Metal plate shunt resistors / ultra low ohmic) Part No. Code Packaging specifications Quantity / Reel PMR01 ZZP 10,000 Rated ambient Rated terminal Resistance Temperature Resistance Operating Automotive Temperature Temperature tolerance coefficient range temperature range Grade Available (mm) (inch) (°C) (°C) (%) (ppm / °C) (mΩ) (°C) (AEC-Q200) PMR01 1005 0402 0.2 70 - J(±5%) 0～+200 10 -55 ～ +155 Yes F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) F(±1%) ±75 J(±5%) ±150 F(±1%) J(±5%) Rated power (W) 1,2 -65 ～ +175 - -65 ～ +155 PMR18 3216 1206 1.5 - 130 ±100 1 70 - ±100 PMR10 2012 0805 Part No. Type code -65 ～ +155 Yes Yes 1,2 3,4,5,6,7,8,9,10 Yes70 - 1 ±100 2 PMR03 1608 0603 0.25 0～+150 10 -55 ～ +155 130 -55 ～ +155 PMR25 3225 1210 Yes - 130 ±75 1 -65 ～ +175 PMR50 5025 2010 Yes PMR100 6432 2512 Yes ±100 2 - 130 ±75 1,2 -65 ～ +175 3 - 130

Chip resistor dimensions and markings ■PMR 01 / 03 / 10 / 18 ■PMR 25 / 50 / 100 <Marking method> There are four digits used for the calculation number "L" is used for the decimal point of mΩ. Ex.) 2mΩ = 2L00 10mΩ = 10L0 *PMR01/03 are NO marking. (Unit : mm) Part No. (mm) (inch) Resistance range (mΩ) L W t a b ｃ Marking existence 2 0.55±0.25 3 0.75±0.25 4 0.60±0.25 5 0.45±0.25 6 0.55±0.25 7 0.45±0.25 8 0.35±0.25 9 0.40±0.25 10 0.35±0.25 2 0.85±0.25 3 1.15±0.25 4 0.90±0.25 5 0.70±0.25 6 0.50±0.25 7 0.75±0.25 8 0.60±0.25 9 0.70±0.25 10 0.60±0.25 1 0.90±0.20 2 1.00±0.20 4 0.90±0.20 5 0.90±0.20 4 1.40±0.20 5 1.05±0.20 6 1.40±0.20 7 1.10±0.20 8 0.90±0.20 9 1.10±0.20 10 0.90±0.20 4 1.80±0.25 5 1.30±0.25 6 1.70±0.25 7 1.40±0.25 8 1.10±0.25 9 1.35±0.25 10 1.10±0.25 PMR18 3216 1206 3.20±0.15 1.60±0.15 PMR10 2012 0805 2.00±0.15 1.20±0.15 ― ― Yes 0.42±0.15 0.32±0.15 0.28±0.15 ― ― Yes 0.32±0.15 0.28±0.15 0.42±0.15 PMR100 6432 2512 6.40±0.25 3.20±0.25 0.32±0.15 PMR50 5025 2010 5.00±0.20 2.50±0.20 PMR25 3225 1210 3.20±0.20 2.50±0.20 0.52±0.15 0.42±0.15 0.32±0.15 0.42±0.15 0.32±0.15

Land pattern example (Unit : mm) (Unit : mm) Dimensions Part No. PMR01 0.5 1.8 0.5 0.65 PMR03 0.5 2.5 0.9 1.0 PMR10 0.8 3.4 1.3 1.3 PMR18 0.6 4.0 1.8 1.7 PMR25 1.0 4.0 2.8 1.5 PMR50 1.8 6.0 2.8 2.1 PMR100 1.2 6.8 3.4 2.8 A B C D

Derating curve When the ambient temperature exceeds 70°C, or terminal temperature in excess 130°C power dissipation must be adjusted according to the derating curve below. <Ambient temperature> ■PMR01 / 03 ■PMR50 (3, 4, 5mΩ) <Terminal temperature> ■PMR10 (2mΩ) ■PMR18 (1, 2mΩ) ■PMR25 (1mΩ) ■PMR50 (1, 2mΩ) ■PMR100 (1, 2mΩ)

Characteristic IEC 60115-1 / IEC 60115-8 JIS C 5201-1 / JIS C 5201-8 Table 1 : Test condition of variation of Table 2 : Test condition of Rapid change of resistance with temperature temperature 20°C Measuring method : Measuring under termination by 4 probes. Test condition ：See following table 1 Rated power×2.5, 2s Solderability A new uniform coating of minimum of Rosin-ethanol solution(25% mass) 95% of the surface being immersed Soldering condition ：245±5°C and no soldering damage. Duration of immersion ：2.0±0.5s ±1.0％ Soldering condition ：260±5°C No remarkable abnormality on the appearance. Duration of immersion ：10±1s Test condition ：See table 2 85°C，85％(Relative humidity) Test time：1,000h Test condition ：See table 3 Test condition ：See table 4 23±5°C, Immersion cleaning, 5±0.5min Solvent: 2-propanol Bend strength of the end Endurance with 90mm width face plating Deflection：3mm ±3.0％ Test conditions Resistance See P.1 Variation of resistance with temperature See P.1 Guaranteed value Overload Resistance to soldering heat Rapid change of temperature ±1.0％ Test items Resistance to solvent ±0.5％ ±3.0％ ±2.0％ Without open. Temperature humidity storage ±3.0％ Endurance (70°C, Terminal temperature) Endurance (Ambient temperature) Bottom termination Probe PMR01 10 PMR03 10 +25/-55, +25/+125 PMR10 Resistance range (mΩ) Test condition (°C) PMR50 PMR100 PMR25 Part No. PMR18 PMR01 10 PMR03 10 2 -55°C～+155°C 1,000cycles 1,2 -55°C～+155°C 1,000cycles 1 -55°C～+155°C 1,000cycles 2,3,4,5 -55°C～+125°C 1,000cycles 1,2 -55°C～+155°C 1,000cycles 1,2 -55°C～+155°C 1,000cycles Part No. PMR25 PMR50 PMR100 Resistance range (mΩ) Test condition -55°C～+125°C 1,000cycles PMR10 PMR18

www.rohm.com © 2023 ROHM Co., Ltd. All rights reserved. 2023.1 - Rev.013 PMR series Datasheet Table 3 : Test condition of variation of endurance Table 4 : Test condition of endurance (Ambient temperature 70°C, Terminal temperature) (ambient temperature) 1,3 175°C Test time : 1,000h 2,4,5 155°C Test time : 1,000h 1,2,3 175°C Test time : 1,000h Test time : 1,000h 1,2 175°C Test time : 1,000h Test time : 1,000h PMR100 PMR25 155°C Test time : 1,000h Part No. Resistance range (mΩ) Test condition PMR01 PMR03 PMR50 PMR01 10 PMR03 10 Terminal temperature : 130°C Rated pow er 1.5h ON-0.5h OFF Test time : 1,000h 3,4,5,6,7,8,9,10 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h 1,2 Terminal temperature : 130°C Rated pow er 1.5h ON-0.5h OFF Test time : 1,000h 3,4,5,6,7,8,9,10 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h Terminal temperature : 130°C Rated pow er 1.5h ON-0.5h OFF Test time : 1,000h Ambient temperature : 70°C Terminal temperature : 115°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h 2,4,5 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h 1,2 Terminal temperature : 130°C Rated pow er 1.5h ON-0.5h OFF Test time : 1,000h 3,4,5,6,7,8,9,10 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h 1,2 Terminal temperature : 130°C Rated pow er 1.5h ON-0.5h OFF Test time : 1,000h 3,4,5,6,7,8,9,10 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h PMR100 Part No. PMR50 PMR25 Ambient temperature : 70°C Rated pow er 1.5h ON, 0.5h OFF Test time : 1,000h PMR10 PMR18 Resistance range (mΩ) Test condition

Tape dimensions ■Paper tape (Unit : mm) ■Embossed tape (Unit : mm)
Reel dimensions Using two kinds of reels for taping. (Unit : mm) Part No. W F E A0 B0 1.45+0.2 2.3+0.2 -0.1 -0.1 1.95+0.1 3.5+0.15 -0.05 -0.05 Part No. D0 P0 P1 P2 T2 PMR03 Φ1.5+0.1 PMR10 Φ1.5+0.1 PMR18 Φ1.5+0.1 Part No. W F E A0 B0 Part No. D0 P0 P1 P2 T2 PMR01 Φ1.5+0.1 PMR25 Φ1.5+0.1 PMR50 Φ1.5+0.1 PMR100 Φ1.5+0.1 Part No. A B C D PMR01 PMR03 PMR10 PMR18 PMR25 PMR50 PMR100 9 +1.0 0Φ180 0 -1.5 Φ60 +1.0 0 Φ13±0.2 13 +1.0

Notice-PGA-E Rev.004 © 2015 ROHM Co., Ltd. All rights reserved. Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property ( “Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used. However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse , is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in the range that does not exceed the maximum junction temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. I f the flow soldering method is preferred on a surface-mount products , please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification

Notice-PGA-E Rev.004 © 2015 ROHM Co., Ltd. All rights reserved. Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use . Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and stor age so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper name s of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties.

Notice – WE Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. General Precaution 1. Before you use our Products, you are requested to caref ully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of an y ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this documen t is current as of the issuing date and subject to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccura cy or errors of or concerning such information.

PMR100EZPJV10L

Compare PMR100EZPJV10L variants.

Read the Rohm document online.

PMR_V02 ROHM

Document overview

Technical content

Rohm PMR100EZPJV10L overview.

More parts from the same family.