PMMK225E ASTRODYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Medical Grade 225 Watt Enclosed Power Supply with PFC PMMK225E series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458

225 Watts Output Power

5656VDC Input to Output Isolation Active Power Factor Correction Model Number Output Voltage Output Amps (max) Ripple & Noise max. (Note 1 & 4) Efficiency SINGLE OUTPUT PMMK225S-5E 5 VDC 40 100mV pk-pk 75% PMMK225S-12E 12 VDC 18.8 120mV pk-pk 79% PMMK225S-15E 15 VDC 15 150mV pk-pk 80% PMMK225S-24E 24 VDC 9.4 240mV pk-pk 80% PMMK225S-36E 36 VDC 6.25 360mV pk-pk 81% PMMK225S-48E 48 VDC 4.7 480mV pk-pk 81% All specifications are typical at nominal input, full load, and 25°C unless other- wise noted

Medical Grade 225 Watt Enclosed Power Supply with PFC PMMK225E series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range 90-264 VAC (100-240VAC Nom) Frequency Range 47-63 Hz Power Factor Correction 0.95, min. Nom I/P, FL Inrush Current, typ: 30A @ 115VAC Cold Start, FL* 60A @ 230VAC Cold Start, FL* Input Current 3.8 Amps max., 90V I/P 1.3 Amps max., 264V I/P Leakage Current <0.3mA, 240Vin, 50Hz OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Line Regulation (LL-HL) ±1%, max. Load Regulation 10%-FL ±1%, max. Preset Accuracy (Note 3) ±1%, typ (±2%, 5 Vout) Ripple/Noise (Notes 1, & 4) See Selection Chart Over Voltage Protection 130% max. Auto Recovery * Over Current Protection 228% max. Auto Recovery * Short Circuit Protection Auto Recover after fault condition is removed * Turn On Delay Time <4S Rise Time <20mS, typ (Nom I/P, FL) Hold Up Time 20mS, typ (Nom I/P, FL) Over-Shoot/Under Shoot <10% of Nominal Output Remote Sense Compensates for up to 0.5V drop Remote Shutdown Open Collector, Logic “1” = ON “0” = Off. No Termination necessary to maintain constant “On” operation PHYSICAL SPECIFICATIONS Size 3.86”W x 7.01”L x 1.5”H Construction Enclosed Weight 1.54 lb, (700g) GENERAL SPECIFICATIONS Isolation (Note 2) I/P-O/P: 5656VDC I/P-Ground: 2121VDC O/P-Ground: 707VDC Insulation Resistance ≥20MΩ Efficiency (FL. Nom I/P) See Selection Chart Safety UL/cUL: ANSI/AAMI ES60601-1 3rd ed. CSA C22.2 No. 60601-1 3rd ed. UL-EU: EN60601-1 3rd ed. CB: IEC60601-1 3rd ed. CE: EN60601-1-2 ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -20 to +70°C (See Derate Curve) Storage Temperature -25 to +85°C * Relative Humidity 10% to +90%, non-cond.* Storage: 5-95% EMS Harmonics Class D, 61000-3-2 Fluctuations 61000-3-3 ESD 61000-4-2 RS 61000-4-3 EFT 61000-4-4 Surge 61000-4-5 CS 61000-4-6 MS 61000-4-8 DIPS 61000-4-11 EMI EN55022 Class B MTBF Mil Std 217F, 25°C 79,000 Hrs, min. Vibration 4G Peak, 50-500Hz, 3 Axes Drop Test 70 CM NOTES 1. All measurements should be made directly at the terminals of the power supply 2. Isolation for up to 1 minute duration. 3. Preset Accuracy measured at nominal load, 120VAC input. 4. O/P Noise measured directly at the pins/terminals at nominal load, 0.1uF ceramic bypass and 47uF electrolytic, pk-pk @ 20MHz bandwidth. These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied.

Medical Grade 225 Watt Enclosed Power Supply with PFC PMMK225E series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Input Connector: 3P / 8.25mm Pitch Terminal Block Output Connector: 6P / 8.25mm Pitch Terminal Block 3.86 178 7.01 FG ACN ACL NC COM COM COM +Vo +Vo-S+SS/DGND 1.50 110 4.33 44.1 1.74 .75 151.1 5.95 50.8 2.00 14.2 .56 23.6 .93 PMMK225 E 2013/02/27 Erica +/- 0.2 mm Check : Date : Drawing : Tolerance : Unit : Scale : Finish : Material : Parts No : Parts Name : ASTRODYNE PACIFIC CORP. File Name : A189 MECHANICAL DIMENSIONS M3 hole size

Medical Grade 225 Watt Enclosed Power Supply with PFC PMMK225E series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OUTPUT DERATING CURVE AAASSSTTTRRROOODDDYYYNNNEEE PPPAAACCCIIIFFFIIICCC CCCOOORRRPPP EEELLLEEECCCTTTRRRIIICCCAAALLL SSSPPPEEECCCIIIFFFIIICCCAAATTTIIIOOONNN Enclosed & Din rail： 20% 40% 60% 80% 100% 120% Load(%) Ambient (℃) 1. 5V convection 2. 12、15、24、36、48V convection 3. Forced air cooling 18CFM Input voltage (VAC) 60Hz Ta=25℃ 1. 5V 2. 12、15、24、36、48V 1313