PMKC03-05S33 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/05/21 INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 6VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 5V input 12V input 24V input 48V input 15VDC 36VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 120mAp-p Start up time Nominal Vin and constant resistive load Power up 30mS, typ. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non derating) Storage temperature range -55ºC ~ +105ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2KV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1KV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load DS ± 0.2% ± 0.5% Load regulation Min Load to Full Load Single Dual DS 3.3Vout Others ± 0.3% ± 0.2% ± 2% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 500μS Over load protection % of FL at nominal input 180%, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output DS Type, Output to Output 1600VDC, min. 500VDC, min. Isolation resistance 10 ohms, min. Isolation capacitance 300pF, max. Switching frequency 100KHz, min. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-c onductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.706 x 10 hrs 3.018 x 10 hrs TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 3 WATTS REGULATED OUTPUT POWER
  • OUTPUT CURRENT UP TO 600mA
  • STANDARD 1.25 X 0.80X 0.40 INCH
  • HIGH EFFICIENCY UP TO 80%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • SWITCHING FREQUENCY (100KHz, MIN)
  • INCLUDE 3.3VDC OUTPUT
  • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
  • DUAL SEPARATE OUTPUT
  • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
  • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE

DESCRIPTION

The PMKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature. PMKC03 series have 2:1 wide input voltage of 4.5-6, 9-18, 18-36 and 36-75VDC.

APPLICATIONS

Page 2 of 3 Issued Date：2008/05/21 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output (4) Ripple&Noise No load (3) Full load (2) Eff (4) (%) Capacitor (5) Load max PMKC03-05S33 4.5 – 6 VDC 3.3 VDC 60mA 600mA 75mVp-p 15mA 609mA 69 2200μF PMKC03-05S05 4.5 – 6 VDC 5 VDC 60mA 600mA 75mVp-p 15mA 857mA 74 1000 μF PMKC03-05S12 4.5 – 6 VDC 12 VDC 25mA 250mA 120mVp-p 30mA 845mA 75 170μF PMKC03-05S15 4.5 – 6 VDC 15 VDC 20mA 200mA 150mVp-p 25mA 845mA 75 110 μF PMKC03-05D05 4.5 – 6 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 15mA 870mA 73 ± 500μF PMKC03-05D12 4.5 – 6 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 20mA 845mA 75 ± 96 μF PMKC03-05D15 4.5 – 6 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 50mA 845mA 75 ± 47μF PMKC03-05DS05 4.5 – 6 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 30mA 870mA 73 V1:500μF;V2:500μF PMKC03-05DS12 4.5 – 6 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 40mA 845mA 75 V1:96μF;V2:96μF PMKC03-05DS15 4.5 – 6 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 40mA 870mA 73 V1:47μF;V2:47μF PMKC03-12S33 9 – 18 VDC 3.3 VDC 60mA 600mA 75mVp-p 20mA 252mA 70 2200μF PMKC03-12S05 9 – 18 VDC 5 VDC 60mA 600mA 75mVp-p 20mA 352mA 75 1000 μF PMKC03-12S12 9 – 18 VDC 12 VDC 25mA 250mA 120mVp-p 20mA 334mA 79 170μF PMKC03-12S15 9 – 18 VDC 15 VDC 20mA 200mA 150mVp-p 30mA 334mA 79 110 μF PMKC03-12D05 9 – 18 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 20mA 357mA 74 ± 500μF PMKC03-12D12 9 – 18 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 35mA 334mA 79 ± 96 μF PMKC03-12D15 9 – 18 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 45mA 334mA 79 ± 47μF PMKC03-12DS05 9 – 18 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 10mA 357mA 74 V1:500μF;V2:500μF PMKC03-12DS12 9 – 18 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 15mA 334mA 79 V1:96μF;V2:96μF PMKC03-12DS15 9 – 18 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 30mA 334mA 79 V1:47μF;V2:47μF PMKC03-24S33 18 – 36 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 126mA 70 2200μF PMKC03-24S05 18 – 36 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 174mA 76 1000 μF PMKC03-24S12 18 – 36 VDC 12 VDC 25mA 250mA 120mVp-p 20mA 165mA 80 170μF PMKC03-24S15 18 – 36 VDC 15 VDC 20mA 200mA 150mVp-p 20mA 165mA 80 110 μF PMKC03-24D05 18 – 36 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 20mA 174mA 76 ± 500μF PMKC03-24D12 18 – 36 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 20mA 167mA 79 ± 96 μF PMKC03-24D15 18 – 36 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 20mA 164mA 80 ± 47μF PMKC03-24DS05 18 – 36 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 20mA 174mA 76 V1:500μF;V2:500μF PMKC03-24DS12 18 – 36 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 20mA 167mA 79 V1:96μF;V2:96μF PMKC03-24DS15 18 – 36 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 20mA 164mA 80 V1:47μF;V2:47μF PMKC03-48S33 36 – 75 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 61mA 72 2200μF PMKC03-48S05 36 – 75 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 88mA 75 1000 μF PMKC03-48S12 36 – 75 VDC 12 VDC 25mA 250mA 120mVp-p 10mA 84mA 79 170μF PMKC03-48S15 36 – 75 VDC 15 VDC 20mA 200mA 150mVp-p 10mA 84mA 79 110 μF PMKC03-48D05 36 – 75 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 10mA 86mA 77 ± 500μF PMKC03-48D12 36 – 75 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 10mA 84mA 79 ± 96 μF PMKC03-48D15 36 – 75 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 10mA 84mA 79 ± 47μF PMKC03-48DS05 36 – 75 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 10mA 86mA 77 V1:500μF;V2:500μF PMKC03-48DS12 36 – 75 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 10mA 84mA 79 V1:96μF;V2:96μF PMKC03-48DS15 36 – 75 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 10mA 84mA 79 V1:47μF;V2:47μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. An external input filter capacitor is requir ed if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 7. The output requires a minimum loading on the output to mainta in specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification.

Page 3 of 3 Issued Date：2008/05/21 SMD PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT

2 NC -O U T P U T

3 NC COMMON

23 NC -O U T P U T

22 NC COMMON

11 +OUTPUT+OUTPUT 14 +OUTPUT+OUTPUT PIN SINGLE DUAL 12 - INPUT - INPUT 13 - INPUT - INPUT Others NC NC Others NC NC DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT NC + INPUT - V1 out + V1 out - V2 out + V2 out DS - INPUT NC DIP PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT

2 NC - OUTPUT

23 NC - OUTPUT

11 +OUTPUT +OUTPUT 14 +OUTPUT +OUTPUT PIN SINGLE DUAL 12 - INPUT - INPUT 13 - INPUT - INPUT DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT + INPUT - V1 out - V2 out + V2 out DS - INPUT + V1 out PMKC03-48S05 Derating Curve 100 120 - 2 5- 51 53 55 57 59 5 1 1 5 AMBIENT TEMPERATURE( ℃) OUTPUT POWER (%) 71 PMKC03-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Suffix-SMD