DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.pduke.com 2013/5/3 PMKC03 SERIES

3 WATTS DC-DC CONVERTER

Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load DS ± 0.2% ± 0.5% Load regulation Min Load to Full Load Single Dual DS 3.3Vout Others ± 0.3% ± 0.2% ± 2% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 500µs Over load protection % of FL at nominal input 180% Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output DS Type, Output to Output 1600VDC, min. 1minute 500VDC, min. 1minute Isolation resistance 500VDC 109ohms, min. Isolation capacitance 300pF, max. Switching frequency 100kHz, min. Design meet safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.706 x 10 6 hrs 3.018 x 106 hrs INPUT SPECIFICATIONS Input voltage range 5VDC nominal input 12VDC nominal input 24VDC nominal input 48VDC nominal input 4.5 ~ 6VDC 9 ~ 18VDC 18~ 36VDC 36 ~75VDC Input filter Pi type Input surge voltage 5VDC input 12VDC input 24VDC input 48VDC input 18VDC 100ms, max. 36VDC 100ms , max. 50VDC 100ms , max. 100VDC 100ms, max . Input reflected ripple current 120mAp-p Start up time Nominal input and constant resistive load Power up 30 ms ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non derating) Storage temperature range -55ºC ~ +125ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 3 WATTS REGULATED OUTPUT POWER
  • OUTPUT CURRENT UP TO 600mA
  • STANDARD 1.25 X 0.80X 0.40 INCH
  • HIGH EFFICIENCY UP TO 80%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • SWITCHING FREQUENCY (100kHz, MIN)
  • INCLUDE 3.3VDC OUTPUT
  • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
  • DUAL SEPARATE OUTPUT
  • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
  • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS SMD TYPE

DESCRIPTION

The PMKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature. PMKC03 series have 2:1 wide input voltage of 4.5 ~6, 9~18, 18~36 and 36~75VDC.

APPLICATIONS

Page 2 of 3 www.pduke.com 2013/5/3 PMKC03 SERIES Voltage Min. load Full load Output (2) Ripple & Noise No load (3) Input Current Eff (4) (%) Capacitor (5) Load max PMKC03-05S33 4.5 ~ 6 VDC 3.3 VDC 60mA 600mA 75mVp-p 15mA 69 2200µF PMKC03-05S05 4.5 ~ 6 VDC 5 VDC 60mA 600mA 75mVp-p 15mA 74 1000 µF PMKC03-05S12 4.5 ~ 6 VDC 12 VDC 25mA 250mA 120mVp-p 30mA 75 170µF PMKC03-05S15 4.5 ~ 6 VDC 15 VDC 20mA 200mA 150mVp-p 25mA 75 110 µF PMKC03-05D05 4.5 ~6 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 15mA 73 ± 500µF PMKC03-05D12 4.5 ~ 6 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 20mA 75 ± 96 µF PMKC03-05D15 4.5 ~6 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 50mA 75 ± 47µF PMKC03-05DS05 4.5 ~ 6 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 30mA 73 V1:500µF;V2:500µF PMKC03-05DS12 4.5 ~ 6 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 40mA 75 V1:96µF;V2:96µF PMKC03-05DS15 4.5 ~ 6 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 40mA 73 V1:47µF;V2:47µF PMKC03-12S33 9 ~ 18 VDC 3.3 VDC 60mA 600mA 75mVp-p 20mA 70 2200µF PMKC03-12S05 9 ~ 18 VDC 5 VDC 60mA 600mA 75mVp-p 20mA 75 1000 µF PMKC03-12S12 9 ~ 18 VDC 12 VDC 25mA 250mA 120mVp-p 20mA 79 170µF PMKC03-12S15 9 ~ 18 VDC 15 VDC 20mA 200mA 150mVp-p 30mA 79 110 µF PMKC03-12D05 9 ~ 18 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 20mA 74 ± 500µF PMKC03-12D12 9 ~ 18 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 35mA 79 ± 96 µF PMKC03-12D15 9 ~ 18 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 45mA 79 ± 47µF PMKC03-12DS05 9 ~ 18 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 10mA 74 V1:500µF;V2:500µF PMKC03-12DS12 9 ~18 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 15mA 79 V1:96µF;V2:96µF PMKC03-12DS15 9 ~18 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 30mA 79 V1:47µF;V2:47µF PMKC03-24S33 18 ~ 36 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 70 2200µF PMKC03-24S05 18 ~ 36 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 76 1000 µF PMKC03-24S12 18 ~ 36 VDC 12 VDC 25mA 250mA 120mVp-p 20mA 80 170µF PMKC03-24S15 18 ~ 36 VDC 15 VDC 20mA 200mA 150mVp-p 20mA 80 110 µF PMKC03-24D05 18 ~ 36 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 20mA 76 ± 500µF PMKC03-24D12 18 ~ 36 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 20mA 79 ± 96 µF PMKC03-24D15 18 ~ 36 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 20mA 80 ± 47µF PMKC03-24DS05 18 ~ 36 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 20mA 76 V1:500µF;V2:500µF PMKC03-24DS12 18 ~ 36 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 20mA 79 V1:96µF;V2:96µF PMKC03-24DS15 18 ~ 36 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 20mA 80 V1:47µF;V2:47µF PMKC03-48S33 36 ~ 75 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 72 2200µF PMKC03-48S05 36 ~ 75 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 75 1000 µF PMKC03-48S12 36 ~ 75 VDC 12 VDC 25mA 250mA 120mVp-p 10mA 79 170µF PMKC03-48S15 36 ~ 75 VDC 15 VDC 20mA 200mA 150mVp-p 10mA 79 110 µF PMKC03-48D05 36 ~ 75 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 10mA 77 ± 500µF PMKC03-48D12 36 ~ 75 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 10mA 79 ± 96 µF PMKC03-48D15 36 ~ 75 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 10mA 79 ± 47µF PMKC03-48DS05 36 ~ 75 VDC V1:5VDC;V2:5VDC V1: 30mA;V2: 30mA V1:300mA;V2:300mA 75mVp-p 10mA 77 V1:500µF;V2:500µF PMKC03-48DS12 36 ~ 75 VDC V1:12VDC;V2:12VDC V1:12mA;V2:12mA V1:125mA;V2:125mA 120mVp-p 10mA 79 V1:96µF;V2:96µF PMKC03-48DS15 36 ~ 75 VDC V1:15VDC;V2:15VDC V1:10mA;V2:10mA V1:100mA;V2:100mA 150mVp-p 10mA 79 V1:47µF;V2:47µF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input and full load. (20MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. 7. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. CAUTION: This power module is not internally fused. An input line fuse must always be used.

Page 3 of 3 www.pduke.com 2013/5/3 PMKC03 SERIES PMKC03-48S05 Derating Curve PMKC03-48S05 Efficiency VS Input V oltage PMKC03-48S05 Efficiency VS Output Current MECHANICAL DRAWING：： ：： DIP TYPE SMD TYPE DIP PIN CONNECTION PIN SINGLE DUAL DS PIN SINGLE DUAL DS 1 +INPUT +INPUT +INPUT 24 +INPUT +INPUT +INPUT

2 NC -OUTPUT - V1 out 23 NC -OUTPUT - V1 out

3 NC COMMON + V1 out 22 NC COMMON + V1 out

10 -OUTPUT COMMON - V2 out 15 -OUTPUT COMMON - V2 out 11 +OUTPUT +OUTPUT + V2 out 14 +OUTPUT +OUTPUT + V2 out 12 -INPUT -INPUT -INPUT 13 -INPUT -INPUT -INPUT SMD PIN CONNECTION PIN SINGLE DUAL DS PIN SINGLE DUAL DS 1 +INPUT +INPUT +INPUT 24 +INPUT +INPUT +INPUT 10 -OUTPUT COMMON - V2 out 15 -OUTPUT COMMON - V2 out 11 +OUTPUT +OUTPUT + V2 out 14 +OUTPUT +OUTPUT + V2 out 12 -INPUT -INPUT -INPUT 13 -INPUT -INPUT -INPUT Others NC NC NC 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1)