PMK150S-12E

PMK150E_16 ASTRODYNE | Alldatasheet

Document overview

• PDF pages: 5

Technical content

150 Watt Enclosed Switching Power Supply with PFC PMK150E series

WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458

150 Watts Output Power

4242VDC Input to Output Isolation Active Power Factor Correction Model Number Output Voltage Output Amps (max) Line Regulation (max) Ripple & Noise SINGLE OUTPUT PMK150S-5E 5 VDC 30 ±1% 150mV pk-pk PMK150S-12E 12 VDC 12.5 ±1% 150mV pk-pk PMK150S-15E 15 VDC 10 ±1% 150mV pk-pk PMK150S-24E 24 VDC 6.3 ±1% 150mV pk-pk PMK150S-48E 48 VDC 3.2 ±1% 250mV pk-pk DUAL OUTPUT PMK150D-AE 5/12 VDC 15/7 ±0.5/1% 50/100mV pk-pk PMK150D-BE 5/24 VDC 15/3.5 ±0.5/2% 50/200mV pk-pk PMK150D-CE 12/24 VDC 7/3.5 ±1/2% 100/200mV pk-pk PMK150D-DE 12/48 VDC 7/1.5 ±1/4% 100/400mV pk-pk

WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range 90-264 VAC (100-240VAC nom.) Frequency Range 47-63 Hz Power Factor Correction 0.96 min. at nom. Input Inrush Current, typ at cold start: 30A @ 115VAC 60A @ 230VAC * Leakage Current <3.5mA @ 264VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current (Note 6) See Selection Chart Line Regulation (Note 8) See Selection Chart Load Regulation (20%-FL) Singles: ± 1%, max. Cross Regulation (note 7) Duals: ±3/5% Preset Accuracy (Note 9) ±1%, typ Ripple/Noise (Notes 1, 3, 10) See Selection Chart Over Voltage Protection 130% max. of nom. input Auto Recover after fault condition is removed * Over Current Protection 150% max. of FL at nom. input Short Circuit Protection Auto Recover after fault condition is removed * Hold Up Time 20mS, typ (Nom I/P, FL) GENERAL SPECIFICATIONS Isolation (Note 4) I/P-O/P: 4242VDC I/P-Ground: 2828VDC O/P-Ground:707VDC Efficiency 75%, min. at nom. input Safety UL/cUL: UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. UL-EU: EN60950-1 2nd ed. CE: EN60601-1-2 CB: IEC60950-1 2nd ed. ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -10 to +70°C (See Derate Curve) Storage Temperature -25 to +85°C * Relative Humidity 0% to +95%, non-cond * EMC EN55011 Class B MTBF 270,000 Hrs Mil Std 217, 25°C PHYSICAL SPECIFICATIONS Size 3.17” x 5.5” x 1.6” Construction Enclosed Weight 1.3 lb, (590g) NOTES * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted 1. All measurements should be made directly at the terminals of the power supply 2. All specifications typical @ 25°C, unless otherwise noted, at nominal line and load. 3. Ripple and noise dependent upon output voltage as specified per particular model. 4. Isolation for up to 1 minute duration. 5. Specified for free air convection cooling. 6. Minimum load is not required for proper operation. 7. Load Regulation is measured by change ±40% of measured output load from 60% full load, with the other output set to 60% full load. 8. Line Regulation measured from 90-264VAC. 100VAC minimum required for full load start. 9. Preset Accuracy measured at nominal load, 120VAC input. 10. O/P Noise measured directly at the pins/terminals at nominal load, 0.1uF bypass and 47uF electrolytic, pk-pk @ 20MHz bandwidth.

WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MECHANICAL DIMENSIONS - SINGLE OUTPUT M3 hole size (i.e. PMK150x-xxD) (i.e. PMK150x-xxD)

WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MECHANICAL DIMENSIONS - DUAL OUTPUT M3 hole size (i.e. PMK150x-xxD) (i.e. PMK150x-xxD)

WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OUTPUT DERATING CURVE - SINGLE OUTPUT OUTPUT DERATING CURVE - DUAL OUTPUT 1. Forced air colling 10 CFM 2. Free air convection - Open Frame, U-Channel 3. Free air convection - Enclosed 3914