PMF SPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 190 Volts
200 Watt Peak Pulse Power
VBR(V) MIN.@IT REVERSE LEAKAGE @ VRWM IR(μA) REVER SESTAND -OFF VOLTAGE VRWM(V) MAXIMUM CLAMPING VOLTAGE @Ipp Vc(V) PEAK PULSE CURREN T Ipp(A) BREAKDOW N VOLTAGE VBR(V) MAX.@IT TEST CURREN T IT(mA) UNI-POLAR BI-POLAR A PMF(200W) Series For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts with A , th e VBR is ± 5% 标注为常用型号 Stand for commonly used models " * " " * "
◎ For surface mounted applications in order to optimize board space ◎ Low profile package ◎ Built-in strain relief ◎ Glass passivated junction ◎ Low inductance ◎ Excellent clamping capability ◎ Repetition Rate (duty cycle):0.01% ◎ Fast response time: typically less than 1.0ps from
0 Volts to V(BR) for unidirectional types
◎ Typical IR less than 1µA above 10V Flammability 94V-O ◎ Pb-free plated SYMBOL VALUE UNITS P PPM Minimu m 200 Watts I PPM SEE TABLE 1 Amps I FSM
20 Amps
T J , T STG -55 to + 150 ℃ Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above T A = 25℃ per Fig. 2 . 2.Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Operating junction and Storage Temperature Range RATING Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,2 ,FIG.1) Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note2,3) For Bidirectional use C or CA Suffix for types PMF5.0 thru types PMF170 (e.g. PMF5.0C , PMF170CA) Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified.
FEATURES
◎ High Temperature solderting: 260°C/10 seconds ◎ Plastic package has Underwriters Laboratory DEVICES FOR BIPOLAR APPLICATION at terminals SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 190 Volts Case: JEDEC SOD-123 molded plastic over passivated chip Terminals: Solder plated, solderable per MIL-STD-750 Method 2026 Polarity: For uni-directional types the bandby laser denotes the cathode, which is positive with respect to the anode under normal TVS operation Dimensions in inches and(millimeters) 02 | www.spsemi.cn PMF(200W) Series 0.04 1.00 0.02 0.50 ( ) ( ) 0.114 2.9 0.098 2.5 ( ) ( ) 0.152 3.82 0.138 3.5 ( ) ( ) Cathode□Band SOD-123 0.077 1.95 0.055 1.38 ( ) ( ) 0.053 1.33 0.031 0.8 ( ) ( ) 0.043 1.10 0.010 0.25 ( ) ( ) 0.010 0.250 0.002 0.050 ( ) ( ) REV.2014.05.01
RATINGS AND CHARACTERISTIC CURVES Characteristic Curves A =25 ℃ unless otherwise noted) 03 | www.spsemi.cn PMF(200W) Series REV.2014.05.01