PM610-M280 APACER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

‧Superb performance and low latency ‧Global Wear Leveling ‧Flash bad-block management ‧Hyper Cache Technology ‧Power Failure Management ‧Thermal Management Technique ‧End-to-End Data Protection ‧TRIM Support ‧CoreGlacier™ heatsink technology for wide temp. ‧Supports SSDWidget S.M.A.R.T function Apacer PM610-M280 is designed as M.2 2280 mechanical dimensions, providing full compliance with PCIe Gen3 x2 interface and NVMe 1.2 specifications. Aside from PCIe compliance, PM610-M280 delivers outstanding performance in data transfer, reaching up to 112,000/118,000 and 1,350/1,005 MB/s in IOPS and sequential read/write. This exceptional throughput indicates massive amounts of data can be processed at high speeds, proving that PM610-M280 is more suitable for high performance compact computers and embedded computing systems. This high-speed disk module uses two PCIe lanes, which greatly saves on power consumption compared with four lanes and delivers much higher performance than SATA SSDs. Moreover, by adopting MLC NAND Flash, PM610-M280 provides trustable endurance and reliability. Feature

Interface PCIe NVMe Gen3x2 Connector M.2 B & M key Form Factor M.2 2280 single side, B+M key: 64, 128 GB M.2 2280 double side, B+M key: 256, 512 GB NAND Flash Type MLC Capacity 64GB~512GB External DRAM Yes Sustained Read Performance (MB/sec) Up to 1,350 Sustained Write Performance (MB/sec) Up to 1,005 ECC Engine Low-Density Parity-Check (LDPC) Code IOPS (4K Random Write) 118K Standard Operating Temperature ( °C ) 0 ~ + 70 Storage Temperature ( °C ) -40 ~ + 100 Thermal Sensor Yes Shock Operation: 50G, 11ms Non-operation: 1500G, 0.5ms Vibration Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G) Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G) Operating Voltage 3.3V ±5% Power Consumption Active mode: 1310 mA / Idle mode: 145 mA Dimension (L x W x H ) Standard temp.: 64, 128 GB: 80.00 x 22.00 x 2.38 (mm) 256, 512 GB: 80.00 x 22.00 x 3.38 (mm) Wide temp.: 64,128 GB: 80.00 x 22.00 x 2.80 (mm) 256, 512 GB: 80.00 x 22.00 x 4.10 (mm) MTBF (hours) >3,000,000

Unit: mm Standard Temperature 64-128GB 256-512GB

Unit: mm 64-128GB Wide Temperature

Taiwan (Headquarters) Apacer Technology Inc. Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 Europe Apacer Technology B.V. Tel: +31-40-267-0000 Fax: +31-40-290-0686 U.S.A. Apacer Memory America, Inc. Tel: +1-408-518-8699 Fax: 1-510-249-9551 China Apacer Electronic(Shanghai) Co., Ltd. Tel: +86-21-6228-9939 Japan Apacer Technology Corp. Tel: +81-3-5419-2668 Fax: +81-3-5419-0018 India Apacer Technologies Pvt. Ltd. Tel: +91-80-41529061~3 Fax: +91-80-41700215 Global Presence For more information, contact your Apacer representative Mechanical Specification Unit: mm Wide Temperature 256-512GB