PM400 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: The PM400 series of AC-DC switching power supplies in a package of 4 X 7 X 1.58 inches are capable of delivering 400 watts of continuous power at 7 CFM forced air cooling or 300 watts at convection cooling. The units are constructed on a printed circuit board with a U– bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing for 400 watt output without the change of any dimension. They are designed for medical applications. The units are certified also to IEC/EN/ UL 60950-1 and suitable for data networking, industrial and telecommunication applications. Features:

  • BF Class insulation
  • Operation altitude up to 5000 meters
  • Suitable for both Class I and Class II applications*
  • 2 x 4 inch foot print with 1.3 inch low profile
  • Less than 2 75 μA leakage current
  • Wide input range 80-264 VAC
  • Meet EN55011 /55022 and FCC Class B
  • Power Factor 0.98 typical
  • 100% burn-in at full load
  • Short –circuit protection
  • Over-temperature protection
  • Power Fail Detect (PFD) signal (optional)
  • Compliant with RoHS Requirements
  • No load power consumption less than 0. 5W without PFD or 1W with PFD Model1 Class II Output Efficiency (typical) @115/230 Vac V1 Min Current Max. Current at convection Max. Current at 7.5 CFM (2) Tol Ripple & Noise4 Max. Output Power3 PM400-12B PM400-13B 12V 15V 0.1A 0.1A 25.00A 20.00A 33.34A 26.67A ±2% ±2% 120mV 150mV

300 W/ 400 W

300 W/400 W

90/92% 90/92% PM400-13-1B PM400-14B 18V 24V 0.1A 0.1A 16.67A 12.50A 22.23A 16.67A ±2% ±2% 180mV 240mV

300 W/ 400W

91/92% 89/91% PM400-15B PM400-17B 28V 36V 0.1A 0.1A 10.72A 8.34A 14.29A 11.12A ±2% ±2% 280mV 360mV 89/91% 90/92% PM400-18B 48V 0.1A 6.25A 8.34A ±2% 480mV 300 W/ 400 W 90/93% NOTES: 1. Dimensions shown in inches [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Dinkle terminal P/N DT-35-B01W-03, with nickel plated M3 screws. 4. P2, P3: M4 x 0.7 screw connectors 5. Connector P4: Molex header 87833-08 or equivalent, mating with Molex housing 51110-0850 or equivalent. 6. Fan connector P5: JST header S2B-ZR-3.4 or equivalent, mating with JST housing ZHR-2 or equivalent. of fixing screws is 4 mm from the outer surface of chassis.

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standard UL ES 60601-1, CSA C22.2 No. 60601-1 , File No. E178020 TUV EN 60601-1 TUV EN 60950-1 UL 60950-1, CSA C22.2 No. 60950-1 EMI Standard IEC60601-1-2:2014: EN55011/EN55022: Class B conducted , class B radiated FCC: Class B conducted, class B radiated VCCI: Class B conducted, class B radiated EMC Performance EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line Flicker EN61000-4-2: ESD ± 15 KV air and ± 8KV contact EN61000-4-4: Fast transient /burst , ± 2 KV EN61000-4-5: Surge, ± 1KV diff, ± KV com EN61000-4-6: Conducted immunity, 10 Vms EN61000-4-8: Magnetic field immunity , 30 A/m EN61000-4-11: Voltage dip immunity , 30 % reduction for 500 ms, 100% reduction for 10 ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90– 264VAC Input Frequency Range 47-63Hz Input Current 4.2 A (rms) @115 VAC, 60 Hz

2.1 A (rms) @ 230 VAC, 50 Hz

Earth Leakage Current 300 μA max. @ 264 VAC, 63 Hz Touch Current 100 μA max. @ 264 VAC, 63 Hz Output Specifications Ripple and noise: 1% peak to peak maximum Remote Sense Compensation for cable losses up to 0.5 V Overvoltage Protection Set at 115-140% of nominal output voltage, automatic recovery Short circuit protection Automatic recovery Over temperature protection Latching by recycle input to reset Thermal shutdown Protected to overtemperature conditions Temperature Coefficient All outputs ±0.04% /°C maximum Transient Response Maximum excursion of 4%, recovering to 1% of final value within 500 us after a 25% Fan Power 12 V at 250 mA maximum Standby power 5V at 100 mA maximum Environmental Specifications Operating Temperature -10 ° C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating Derate from 100% at +50° C linearly to 50% at +70°C, applicable to convec- tion and forced-air cooling conditions General Specifications Switching frequency 85KHz (typical) Power Factor >0.9 Efficiency Typical 89% @ 115 VAC, 92% @ 230 VAC Hold-up time 12 ms minimum at 110 VAC & 400W Line Regulation ±0.5% maximum at full load Inrush Current 20 A @ 115 VAC, or 40 A @ 230 VAC, at 25 ° C cold start Withstand Voltage

4000 VAC from input to output (2 MOPP)

1500 VAC from input to ground (1 MOPP)

1500 VAC from output to ground

MTBF 250,000 hours at full load at 25°C ambient, calculated per MIL-HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams