PM2B-1LAE

PM2B-1LXE ELITE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

Features

• High flux per LED
• Various colors
• Good color uniformity
• Low-temp. & lead free reflow soldering
• RoHS compliant
• More energy efficient than incandescent and most halogen lamps
• Low Voltage DC operated
• Instant light (less than 100ns)
• No UV
• Superior ESD protection Typical Applications
• Reading lights (car, bus, aircraft)
• Portable (flashlight, bicycle)
• Uplighters/Downlighters
• Decorative/Entertainment
• Bollards/Security/Garden
• Cove/Undershelf/Task
• Indoor/Outdoor Commercial and Residential Architectural
• Automotive Ext (Stop-Tail-Turn, CHMSL, Mirror Side Repeat)
• LCD backlights 1 2011/01

Emitter Mechanical Dimensions Notes: 1. The Anode side of the device is denoted by a hole in the lead frame. 2. Electrical insulation between the case and the board is required --- slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. All dimendions without tolerances are for reference only. 6. Please do not bend the leads of the LED, otherwise it will damage the LED. 7. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. *The appearance and specifications of the product may be modified for improvement without notice. TOP VIEW BOTTOM VIEW

Flux Characteristics at 350mA, TJ = 25°C Radiation Pattern Minimum Typical White 87.4 lm 110 lm Warm White 76.6 lm 106 lm Crimson 13.9 lm 21 lm Red 30.6 lm 48 lm Amber 39.8 lm 55 lm Green 58.9 lm 70 lm Cyan 51.7 lm 57 lm Blue 13.9 lm 20 lm Royal Blue 355 mW 470 mW Cherry Red 115 mW 160 mW

• ProLight maintains a tolerance of ± 10% on flux and power measurements.
• Please do not drive at rated current more than 1 second without proper heat sink. Electrical Characteristics at 350mA, TJ = 25°C Min. Typ. Max. White 2.85 3.5 4.1 Warm White 2.85 3.5 4.1 Crimson 1.75 2.2 3.0 Red 1.75 2.2 3.0 Amber 1.75 2.2 3.0 Green 2.85 3.5 4.1 Cyan 2.85 3.5 4.1 Blue 2.85 3.5 4.1 Royal Blue 2.85 3.5 4.1 Cherry Red 1.75 2.2 3.0 PM2B-1LEE Forward Voltage VF (V) Thermal Resistance Junction to Slug (°C/ W) PM2B-1LME Part Number LumiousFlux or Power PM2B-1LVE PM2B-1LRE PM2B-1LAE PM2B-1LGE PM2B-1LCE Lambertian Emitter PM2B-1LBE PM2B-1LDE PM2B-1LWE Color Color

Optical Characteristics at 350mA, TJ = 25°C Total included Viewing Angle Angle (degrees) (degrees) Min. Typ. Max. θ0.90V 2 θ1/2 White 4100 K 5500 K 10000 K 180 130 Warm White 2700 K 3300 K 4100 K 180 130 Crimson【2】 635 nm 640 nm 645 nm 180 130 Red 613.5 nm 623 nm 631 nm 180 130 Amber 587 nm 592 nm 597 nm 180 130 Green 515 nm 525 nm 535 nm 180 130 Cyan 495 nm 505 nm 515 nm 180 130 Blue 455 nm 465 nm 475 nm 180 130 Royal Blue 450 nm 455 nm 460 nm 180 130 Cherry Red【1】 720 nm 730 nm 740 nm 180 130

• ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
• ProLight maintains a tolerance of ± 5% for CCT measurements. 【1】Cherry Red product is binned by peak wavelength rather than dominant wavelength. 【2】Dominant wavelength 640nm equals to peak wavelength around 660nm. Absolute Maximum Ratings Parameter DC Forward Current (mA) Peak Pulsed Forward Current (mA) Average Forward Current (mA) ESD Sensitivity (HBM per MIL-STD-883E Method 3015.7) LED Junction Temperature (°C) Aluminum-core PCB Temperature (°C) Storage & Operating Temperature (°C) Soldering Temperature(°C) Color or Color Temperature CCT Peak Wavelength [1]λP, 500 120 105 -40 to +105 235°C Dominant Wavelength λD, White/Warm White/Crimson/Red/ Amber/Green/Cyan/Blue/Royal Blue/Cherry Red 350 ±4000V (Class III) 350

Radiometric Power Bin Structure P Q R J K

• ProLight maintains a tolerance of ± 10% on flux and power measurements.
• The flux bin of the product may be modified for improvement without notice. 【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility. Photometric Luminous Flux Bin Structure L M N P Q R R M N P
• ProLight maintains a tolerance of ± 10% on flux and power measurements.
• The flux bin of the product may be modified for improvement without notice. 【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility. Warm White 120 130 【1】 All All 【1】 120 130 All White 130 140 【1】 51.7

120 All

【1】 Royal Blue 355 435 All 435 515 All 515 635 【1】 Color Bin Code Minimum Maximum Available Radiometric Power (mW) Radiometric Power (mW) Color Bins 18.1 AllAmber 39.8 51.7 58.9 67.2 58.9 A,1【1】 A,1【1】 A,1【1】 13.9 110 76.6 51.7 51.7 30.6 39.8 110

110 All

87.4 100 All Color Bin Code Minimum Maximum All Available Color Bins 87.4 100 All 18.1 23.5 87.4 All 58.9 120110 67.2 100 39.8 Green 58.9 Red Photometric Flux (lm) Photometric Flux (lm)

100 All

23.5 30.6

76.6 All

76.6 87.4 【1】 Cherry Red 115 145 All 145 175 【1】 Crimson 10.7 13.9 All 13.9 18.1

23.5 All

30.6 【1】 Cyan 51.7 58.9 All 58.9 All 23.5 18.1 67.2 【1】 All 67.2

White and Warm White Binning Structure Graphical Representation 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 y x 10000 K 7000 K 6300 K 5650 K 5000 K 4500 K 4100 K 3800 K 3500 K 3250 K 3050 K

2850 K 2700 K

(BBL) Warm White White

Bin Code x y Typ. CCT (K) Bin Code x y Typ. CCT (K) 0.378 0.382 0.329 0.345 0.374 0.366 0.316 0.333 0.360 0.357 0.315 0.344 0.362 0.372 0.329 0.357 0.382 0.397 0.329 0.331 0.378 0.382 0.329 0.320 0.362 0.372 0.318 0.310 0.365 0.386 0.317 0.320 0.362 0.372 0.308 0.311 0.360 0.357 0.305 0.322 0.344 0.344 0.316 0.333 0.346 0.359 0.317 0.320 0.365 0.386 0.305 0.322 0.362 0.372 0.303 0.333 0.346 0.359 0.315 0.344 0.347 0.372 0.316 0.333 0.329 0.331 0.308 0.311 0.329 0.345 0.317 0.320 0.346 0.359 0.319 0.300 0.344 0.344 0.311 0.293 0.329 0.345 0.308 0.311 0.329 0.357 0.283 0.284 0.347 0.372 0.274 0.301 0.346 0.359 0.303 0.333 0.329 0.345 0.308 0.311 0.329 0.331 0.311 0.293 0.317 0.320 0.290 0.270 0.316 0.333 0.283 0.284

• Tolerance on each color bin (x , y) is ± 0.01 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. W0 5970 YA 8000 V0 5320 XP 6650 VN 5320 Y0 8000 U0 4750 X0 6650 UN 4750 XN 6650 T0 4300 WN 5970 TN 4300 WP 5970 Y0 V1V0YA WAX1X0 W0 CCT 4500KCCT 5000KCCT 5500KCCT 6000KCCT 7000KCCT 8000K

Bin Code x y Typ. CCT (K) Bin Code x y Typ. CCT (K) 0.453 0.416 0.409 0.400 0.444 0.399 0.402 0.382 0.459 0.403 0.416 0.389 0.467 0.419 0.424 0.407 0.460 0.430 0.414 0.414 0.453 0.416 0.409 0.400 0.467 0.419 0.424 0.407 0.473 0.432 0.430 0.421 0.438 0.412 0.392 0.391 0.429 0.394 0.387 0.374 0.444 0.399 0.402 0.382 0.453 0.416 0.409 0.400 0.444 0.426 0.414 0.414 0.438 0.412 0.409 0.400 0.453 0.416 0.392 0.391 0.460 0.430 0.397 0.406 0.424 0.407 0.392 0.391 0.416 0.389 0.387 0.374 0.429 0.394 0.374 0.366 0.438 0.412 0.378 0.382 0.430 0.421 0.397 0.406 0.424 0.407 0.392 0.391 0.438 0.412 0.378 0.382 0.444 0.426 0.382 0.397

• Tolerance on each color bin (x , y) is ± 0.01 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. P0 3150 S0 3950 P1 3150 S1 3950 N0 2950 R0 3650 N1 2950 R1 3650 M0 2770 Q0 3370 M1 2770 Q1 3370 Y0 V1V0YA WAX1X0 W0 CCT 4500KCCT 5000KCCT 5500KCCT 6000KCCT 7000KCCT 8000K

Peak Wavelength Bin Structure Cherry Red 1 Dominant Wavelength Bin Structure Crimson 1 A A A

• ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements. Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Maximum Dominant 587.0 Wavelength (nm) Red 594.5 597.0 Wavelength (nm) 589.5 620.5 592.0 620.5 631.0 613.5 589.5 592.0 Royal Blue 460 Blue 594.5 510 Amber 460 465 465 470 Green Color Bin Code Minimum Peak Maximum Peak 460455 Cyan 495 500 455 450 500 505 475 455 510 515 505 470 Wavelength (nm) Wavelength (nm) 720 740
• ProLight maintains a tolerance of ± 1nm for peak wavelength measurements. 635.0 645.0 Bin CodeColor Minimum Dominant 530 535 515 520 520 525 525 530

Forward Voltage Bin Structure Color Bin Code A B D E F A B D E F A B D E F A B D E F A B D E F A B D E F A B D E F A B D E F A B D E F A B D E F

• ProLight maintains a tolerance of ± 0.1 for Voltage measurements. Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 2.85 3.10 3.85 4.10 3.60 3.85 3.10 4.10 3.60 3.35 3.60 3.85 3.85 4.10 Amber 2.25 3.60 2.85 3.35 3.60 3.85 Blue Royal Blue Red 2.50 3.00 2.00 3.35 2.85 2.75 1.75 2.50 2.50 2.00 1.75 2.75 Cyan 3.10 3.35 2.75 3.60 3.10 3.85 White 2.85 3.10 3.10 3.35 Warm White 3.85 4.10 3.60 4.10 3.10 3.00 2.00 2.25 2.25 3.10 2.75 2.25 2.50 2.00 3.60 3.85 3.35 3.60 3.85 3.35 3.85 3.60 2.85 3.10 Minimum Voltage (V) Maximum Voltage (V) 3.35 Crimson 1.75 2.00 2.00 2.25 2.25 2.50 2.50 2.75 2.75 3.00 Green 2.85 3.10 3.10 3.35 2.25 3.35 3.60 3.60 3.85 3.85 4.10 3.35 3.10 3.35 2.25 2.50Cherry Red 2.50 2.75 2.75 3.00 1.75 2.00 2.00

Color Spectrum, TJ = 25°C 1. White 2. Warm White 3. Royal Blue、Blue、Cyan、Green、Amber、Red、Crimson、Cherry Red 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 800 Relative Spectral Power Distribution Wavelength(nm) 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 800 850 Relative Spectral Power Distribution Wavelength(nm) Standard Eye Response Cruve White 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 800 850 Relative Spectral Power Distribution Wavelength(nm) Standard Eye Response Cruve Warm White Amber Red Royal Blue Blue Green Cyan Crimson Cherry Red

Light Output Characteristics Relative Light Output vs. Junction Temperature at 350mA 100 120 140 160 1 2 3 4 5 6 7 8 Relative Light Output (%) Junction Temperature, TJ (℃) -20 0 20 40 60 80 100 120 White, Warm White Green, Cyan, Royal Blue Blue 100 120 140 160 Relative Light Output (%) Junction Temperature, TJ (℃) -20 0 20 40 60 80 100 120 Crimson, Red Cherry Red Amber

Forward Current Characteristics, TJ = 25°C 1. Forward Voltage vs. Forward Current 2. Forward Current vs. Normalized Relative Luminous Flux 100 150 200 250 300 350 400 0 0.5 1 1.5 2 2.5 3 Average Forward Current (mA) Forward Voltage (V) Crimson, Red, Cherry Red, Amber 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 100 200 300 400 Relative Luminous Flux Forward Current (mA) White, Warm White, Green, Cyan, Blue, Royal Blue 100 150 200 250 300 350 400 0 0.5 1 1.5 2 2.5 3 3.5 4 Average Forward Current (mA) Forward Voltage (V) White, Warm White, Green, Cyan, Blue, Royal Blue 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 100 200 300 400 Relative Luminous Flux Forward Current (mA) Crimson, Red, Cherry Red, Amber

Ambient Temperature vs. Maximum Forward Current 1. White, Warm White, Green, Cyan, Blue, Royal Blue (TJMAX = 120°C) 2. Crimson, Red, Amber, Cherry Red (TJMAX = 120°C) 100 150 200 250 300 350 400 0 25 50 75 100 125 150 Forward Current (mA) Ambient Temperature (℃) RθJ-A = 60°C/W RθJ-A = 50°C/W RθJ-A = 30°C/W RθJ-A = 40°C/W 100 150 200 250 300 350 400 0 25 50 75 100 125 150 Forward Current (mA) Ambient Temperature (℃) RθJ-A = 60°C/W RθJ-A = 50°C/W RθJ-A = 30°C/W RθJ-A = 40°C/W

Typical Representative Spatial Radiation Pattern Lambertian Radiation Pattern 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Relative Intensity Angular Displacement (Degrees)

Qualification Reliability Testing Stress Test Stress Duration Failure Criteria Room Temperature Operating Life (RTOL) Wet High Temperature Operating Life (WHTOL) Wet High Temperature Storage Life (WHTSL) High Temperature Storage Life (HTSL) Low Temperature Storage Life (LTSL) Non-operating Temperature Cycle (TMCL) Non-operating Thermal Shock (TMSK) Variable Vibration Frequency Solder coverage on lead Notes: 1. Depending on the maximum derating curve. 2. Criteria for judging failure Min. IF = max DC -- VR = 5V -- * The test is performed after the LED is cooled down to the room temperature. 3. A failure is an LED that is open or shorted. Stress Conditions 25°C, IF = max DC (Note 1) 1000 hours Note 2 85°C/60%RH, IF = max DC (Note 1) 1000 hours Note 2 85°C/85%RH, non-operating 1000 hours Note 2 110°C, non-operating 1000 hours Note 2 -40°C, non-operating 1000 hours Note 2 -40°C to 120°C, 30 min. dwell, 200 cycles Note 2<5 min. transfer -40°C to 120°C, 20 min. dwell, 200 cycles Note 2<20 sec. transfer Mechanical Shock 1500 G, 0.5 msec. pulse, Note 35 shocks each 6 axis Natural Drop On concrete from 1.2 m, 3X Note 3 10-2000-10 Hz, log or linear sweep rate, Note 320 G about 1 min., 1.5 mm, 3X/axis Solderability Steam age for 16 hrs., then solder dip at 260°C for 5 sec. Item Test Condition Criteria for Judgement Max. Reverse Current (IR) 50 μA Forward Voltage (VF) Initial Level x 1.1 Luminous Flux or IF = max DC Initial Level x 0.7 --Radiometric Power (ΦV)

Recommended Solder Pad Design

• All dimensions are in millimeters.
• Electrical isolation is required between Slug and Solder Pad.

Reflow Soldering Condition

• All temperatures refer to topside of the package, measured on the package body surface.
• Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a heat plate should be used. It should be confirmed beforehand whether the characteristics of LEDs will or will not be damaged by repairing.
• Reflow soldering should not be done more than two times.
• When soldering, do not put stress on the LEDs during heating.
• After soldering, do not warp the circuit board. Sn-Pb Eutectic Assembly 3 °C/second max. 4 minutes max. (58Bi-42Sn Eutectic Alloy) Low-Temp. & Pb-Free Assembly 90 °C 120 °C 60-120 seconds 2 °C / second max. Liquidous temperature (TL) Time at liquidous (tL) Peak package body temperature (TP) 20 secondsTime (tP) within 5°C of the specified 138°C 20-50 seconds 185°C Profile Feature Average Ramp-Up Rate (Tsmax to TP) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) Average ramp-down rate (TP to Tsmax) Time 25°C to Peak Temperature classification temperature (TC) 6 °C/second max. 6 minutes max. 100 °C 150 °C 60-120 seconds 3 °C / second max. 183°C 60-150 seconds 235°C 20 seconds

Notes: 1. 50 pieces per tube. 2. Drawing not to scale. 3. All dimensions are in millimeters. 4. All dimendions without tolerances are for reference only. **Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH.

• Storage Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
• The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering.
• Please avoid rapid cooling after soldering.
• Components should not be mounted on warped direction of PCB.
• Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a heat plate should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When cleaning is required, isopropyl alcohol should be used.
• When the LEDs are illuminating, operating current should be decide after considering the package maximum temperature.
• The appearance, specifications and flux bin of the product may be modified for improvement without notice. Please refer to the below website for the latest datasheets. http://www.prolightopto.com/