PA1005.XXXNL PULSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1 power.pulseelectronics.com SPM2007_58 (02/19) http:/ /www.power.pulseelectronics.com/contact SMT Current Sense Transformers PA1005.XXXNL and PM2165.XXXNL Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C Part Number Turns Ration Current Rating2 (A) Secondary Inductance (mH MIN) DCR (mΩ MAX) Hipot (VRMS)Commerical Automotive7 Primary (8-7) Secondary (1-3) PA1005.020NL PM2165.020NL 1:20 20 0.08 0.75 550 1000 PA1005.030NL PM2165.030NL 1:30 20 0.18 0.75 870 1000 PA1005.040NL PM2165.040NL 1:40 20 0.32 0.75 1140 1000 PA1005.050NL PM2165.050NL 1:50 20 0.5 0.75 1500 1000 PA1005.060NL PM2165.060NL 1:60 20 0.72 0.75 2250 1000 PA1005.070NL PM2165.070NL 1:70 20 0.98 0.75 4750 1000 PA1005.100NL PM2165.100NL 1:100 20 2.00 0.75 5500 1000 PA1005.125NL PM2165.125NL 1:125 20 3.00 0.75 6500 500 1. The temperature of component (ambient temperature plus temper-ature rise) must be within the specified operating temperature range. 2. The maximum current rating is based upon temperature rise of the component and represents the DC current which will cause a typical temperature rise of 40°C with no airflow. 3. To calculate value of terminating resistor (Rt) use the following formula: Rt (W) = Vref * N /(Ipeak_primary) 4. The peak flux density of the device must remain below 2000 Gauss. To calculate the peak flux density for uni-polar current use following formula: Bpk = 37.59 * Vref * (Duty_Cycle_Max) * 105 / (N * Freq_kHz) * for bi-polar current applications divide Bpk (as calculated above) by 2. 5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part num- tape and reel specification EIA481. 6. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the “NL” suffix, but an RoHS compliant version is required, please contact Pulse for availability. 7. The PM2165.XXXNL part numbers are AEC-Q200 and IATF16949 certified. The mechanical dimensions are 100% tested in production but do not necessarily meet aproduct capabil- ity index (Cpk) >1.33 and therefore may not strictly conform to PPAP . Height: 5.5mm Max Footprint: 8.4mm x 7.2mm Max Current Rating: up to 20A Frequency Range: 20kHz to 1MHz Low Primary DCR version of P820X Notes:

2 power.pulseelectronics.com SPM2007_58 (02/19) http:/ /www.power.pulseelectronics.com/contact SMT Current Sense Transformers PA1005.XXXNL and PM2165.XXXNL Pulse Worldwide Headquarters

15255 Innovation Drive Ste 100

San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Pulse Electronics GmbH Am Rottland 12

58540 Meinerzhagen

Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P .R. China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse South Asia

3 Fraser Street 0428

Tel: 65 6287 8998 Fax: 65 6280 0080 Pulse North Asia 1F., No.111 Xiyuan Road Zhongli District Taoyuan City 32057 Taiwan (R.O.C) Tel: 886 3 4356768 Fax: 886 3 4356820 For More Information Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. Pulse North China Room 2704/2705 Super Ocean Finance Ctr.

2067 Yan An Road West

Tel: 86 21 62787060 Fax: 86 2162786973 Mechanical Schematic TAPE & REEL INFO SURFACE MOUNTING TYPE, REEL/TAPE LIST PART NUMBER REEL SIZE (mm) TAPE SIZE (mm) QTY A G P1 W K0 PCS/REEL PA1005.XXXNLT/PM2165.XXXNLT Ø330 16.4 12 16 5.65 900 USER DIRECTION OF FEED GK0 P1 W A Dimensions: .Inches Unless otherwise specified, all tolerances are: ±..010 mm 0,25