PM110 POWERBOX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Low safety ground leakage current. Wide input range 85 to 264Vac. Input surge current protection. Overvoltage protection. Overcurrent protection. Open PCB construction. 100% burn-in at full rated load. Specifications INPUT Input Voltage 85–264Vac wide input Frequency 47Hz–67Hz Input Current 3.2A (rms) for 115Vac. 1.8A (rms) for 230Vac. Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Isolation Input – Output: 4000VAC Input – Ground: 1500VAC Output – Ground: 500VAC Inrush Current 15A @ 115V, 30A @ 230V OUTPUT Output Voltage See table Output Voltage Adjustment V1 ±10% Output Current See table Ripple & Noise 1% peak to peak Line Regulation ±0.5% maximum at full load. Load Regulation See table Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Overvoltage Protection Provided on V1 only. Set at 110%–132% of nominal Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C Holdup Time Typically 12mS at 110VAC PFD Signal Power fail detection signal. TTL logic low upon loss of input power. OPERATING MTBF 400,000 hrs @ 25°C Efficiency 66%–75% ENVIRONMENTAL Operating Temperature 0°C to 70°C Derating Derate to 50% at 70°C Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN60601-1-2: 2001,EN61000-3-2, -3, EMI standards EN55011 Class B, FCC Class B, VCCI Class B MECHANICAL Dimensions 177.8x108x47mm Weight 640grams.
MEDICAL & MILITARY 341Your dependable power partner – www.powerbox.com.au Selection Table MAX. MODEL OUTPUT #1 OUTPUT #2 (1) OUTPUT #3 OUTPUT #4 OUTPUT NUMBER(1)(2) VNOM IMIN IMAX TOL VNOM IMIN IMAX IPEAK TOL VNOM IMIN IMAX TOL VNOM IMIN IMAX TOL POWER (2) PM110-10-1A 3.3V 0A 22A 3% 72W PM110-10A 5V 0A 22A 3% 110W PM110-12A 12V 0A 9.0A 2% 110W PM110-13A 15V 0A 7.5A 2% 110W PM110-14A 24V 0A 4.5A 2% 110W PM110-16A 30V 0A 3.6A 2% 110W PM110-23A +5.1V 0A 10A 3% +12V 0A 5A 9.0A 3% 110W PM110-31A +5.1V 0A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% 110W PM110-32A +5.1V 0A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% 110W PM110-40A +5.1V 0A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% -5V 0A 1A 4% 110W PM110-41A +5.1V 0A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% +24V 0A 1A 4% 110W PM110-42A +5.1V 0A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% +12V 0A 1A 4% 110W PM110-45A +5.1V 0A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% +24V 0A 1A 4% 110W PM110-45-1A +5.1V 2A 10A 3% +12V 0A 5A 9.0A 3% -12V 0A 1A 4% +24V 1.5A 3A 10% 110W PM110-45-2A +5.1V 0A 10A 3% +24V 0A 3A 5.0A 3% -12V 0A 1A 4% +12V 0A 1A 4% 110W PM110-46A +5.1V 0A 10A 3% +15V 0A 4A 7.5A 3% -15V 0A 1A 4% -5V 0A 1A 4% 110W NOTES: (1) Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130watts. (2) 110 watts maximum at 25CFM forced air cooling or 80 watts maximum at convection cooling, except model PM110-10-1A which is ra ted maximum 60 watts at convection cooling or 72 watts at 25 CFM forced air cooling. (3) Safety agency approvals are for the above listed models in PCB mounted format. To order a model with a metallic L-bracket or box, change suffix “AL” to “B”for L-bracket format, to “C” for enclosed format. (4) The output #1 of model PM110-45-1A needs a minimum current of 2A to support the other outputs at their maximum rated loads. PM110 Series 72-110 WATTS SINGLE & MULTIPLE OUTPUT AC/DC MEDICAL MODEL/PIN 1,2,3 4,5 6,7 8,9 10 11 12 13 PM110-10-1A PM110-12A PM110-14A PM110-10A PM110-13A PM110-16A PM110-23A Output 1 Common Return Common Return PM110-31A PM110-32A Output 1 Common Return Common Return PM110-40A PM110-42A PM110-45-1A PM110-46A PM110-41A PM110-45A PM110-45-2A Output 1 Common Return Common Return Output 2 P. F. D. Output 3 Key Output 4 Pin Chart Technical Illustration