PM-100 TEMPOCOMMUNICATIONS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Small and perfectly formed with all the basic measurement features you’re likely to need, including fully automatic operation by default: the Pocket Multimeter (PM-100) from Tempo Communications is a great addition to any toolbox. Carry it everywhere. Truly pocket sized, yet immensely useful and built to international safety standards, the PM-100 will easily become your go-to tool for quickly checking electrical supplies and basic continuity. Supplied in a convenient zipper case, the only control on this Pocket Multimeter is a single push button that switches the unit on and off, and cycles through the various tests: 1. Powers up in “automatic mode”
- AC voltage
- DC voltage
- Resistance 2. Manual selection of each function
- Continuity
- Electric Field (EF) (voltage detector)
- Volts AC
- Volts DC 3. 6000 Count large digit LCD
- Resistance
- Frequency
- Capacitance Product Features: PM-100 POCKET MULTIMETER TESTING | TROUBLESHOOTING | ACCURACY Renewed Vision. Innovation Forward. Follow us on Social Media @TempoCommsTempoCom.com | tel 800.642.2155 | sales@tempocom.com
1390 Aspen Way Vista, CA • 92081 TC-PM-100 06/20
Latin America Phone : 1.760.510.0558 | EMEA Phone: +44 (0) 1633 927050 ©2019 Tempo Communications Inc. • An ISO 9001 Company EMEA Address: Tempo Communications Limited • Brecon House, William Brown Close, Cwmbran • NP44 3AB, UK
Display: 6000-count LCD Polarity: Automatic Display Update Rate: 5 per second Temperature Coefficient: Nominal 0.15 x (specified accuracy) per °C below 18 °C or above 28 °C Intelligent Automatic Power Off: After 3 minutes of inactivity (approximately) Noise Rejection:* Common Mode Rejection Ratio: > 60 dB from 0 Hz to 60 Hz when measuring ACV Common Mode Rejection Ratio: > 100 dB at 0 Hz, 50 Hz, and 60 Hz when measuring DCV Normal Mode Rejection Ratio: > 30 dB at 50 Hz and 60 Hz when measuring DCV Operating Conditions: Temperature: 0 °C to 40 °C (32 °F to 104 °F) Relative Humidity (non-condensing): 80% maximum for temperatures up to 31 °C (88 °F), decreasing linearly to 50% maximum at 40 °C (104 °F) Altitude: 2000 m (6500’) maximum Pollution Degree: 2 Storage Conditions: –20 °C to 60 °C (–4 °F to 140 °F), 0% to 80% relative humidity (non-condensing) Battery: 3 V standard button battery (IEC-CR2032; ANSI-NEDA-54004LC) Low Battery: Below 2.4 VDC Overvoltage Protection: 450 VDC/VAC RMS, 50/60 Hz Measurement Categories: Cat II, 450 V Cat III, 300 V SPECIFICATIONS: ACCURACY: Range Accuracy Specified at 10.00 Hz to 30.00 kHz ± (0.5% + 4d) less than 20 V sine RMS FREQUENCY * Noise rejection is the ability to reject unwanted signals, or noise.
- Normal mode voltages are AC signals that can cause inaccurate DC measurements. NMRR (Normal Mode Rejection Ratio) is a measure of the ability to filter out these signals.
- Common mode voltages are signals present at the COM and + input terminals, with respect to ground, that can cause digit rattle or offset in voltage measurements. CMRR (Common Mode Rejection Ratio) is a measure of the ability to filter out these signals. DCV Range Accuracy RESISTANCE (AUTO V•Ω MODE) Range Accuracy CAPACITANCE Range Accuracy ACV Range (50 to 60 Hz) Accuracy WIRELESS ELECTRIC FIELD DETECTION (EF) Typical Voltage Bar graph indication
15 V to 55 V -
30 V to 85 V --
45 V to 145 V ---
75 V to 190 V ----
Renewed Vision. Innovation Forward. Latin America Phone : 1.760.510.0558 | EMEA Phone: +44 (0) 1633 927050 ©2019 Tempo Communications Inc. • An ISO 9001 Company EMEA Address: Tempo Communications Limited • Brecon House, William Brown Close, Cwmbran • NP44 3AB, UK Follow us on Social Media @TempoCommsTempoCom.com | tel 800.642.2155 | sales@tempocom.com