PM0613EBM05KQ22 CK-COMPONENTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
L–31 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com LSwitchlock Models Available PM Series
5 Tumbler Miniature Snap-in Switchlocks
- International agency listings
- Snap-in mounting
- Wire lead terminations available
- 5 Tumbler lock with positive detent Typical Applications
- Computers
- Point-of-sale terminals
- Marine equipment Specifications CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA); 4 AMPS @ 125 V AC,
2 AMPS @ 250 V AC, T65 (VDE). See page M-33 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 90º:2 positions. Materials LOCK: 6/6 nylon with matte finish (UL 94V-2), color black, 5 tumbler, single bitted lock with integral detent mechanism. KEYS: Two nickel plated brass keys with black plastic head, other colors available. SWITCH HOUSING: 6/6 nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page L-33 for additional contact materials. NOTE: Any models supplied with Q or B contact material ar e RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–32 and L-33. For additional options not shown in catalog, consult Customer Service Center. Switch and lock Function PM0613 SP, 90º, Index, keypull pos. 1 PM061U SP , 90º Index, keypull pos. 1 & 3 Lock Color
2 Black
05 Quick connect
M Plastic lock with matte finish Lock Style K Cone shaped facing
L–32 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com LSwitchlock PM Series = Detent Position (90º ) = Key pull possible in these positions. = Stop Positions LEGEND KEYING KEY COLOR LOCK TYPE LOCK COLOR B 5 TUMBLER LOCK WITH DETENT E TWO NICKEL PLATED BRASS KEYS WITH INSERT MOLDED PLASTIC HEAD NOTE: Molded plastic head color is black, standard. For more than one key code, replacement keys, or other special featur es, consult Customer Service Center. All models with all options when ordered with ‘Q’ contact material. 90º Position 1 Positions 1 & 2 ONOFF PM0613 PM061U SP INDEXING LOCK CONFIGURATION KEY PULL POSITIONS SWITCH FUNCTION POS. 1 POS. 2MODEL NO. NO. POLES Part number shown: PM0613EBM05KQ22 SP POS. 1 POS. 2 POS. 1 POS. 2 Key part number: 334C1004102
L–33 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com LSwitchlock WC WIRE LEAD PM Series Panel thickness: M PLASTIC LOCK WITH MATTE FINISH UL style 1015. Black wire standard, other colors and lengths available, consult Customer Service Center. Key Code: 041 PART NO. (ONE KEY) 334C1004102 BLACK Material: Brass Finish: Nickel plate 6/6 Nylon insert molded head 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2 CONTACTS & TERMINALS: Copper, silver plated (standard with all
termination options). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. All models with all options when ordered with ‘Q’ contact material. CONTACT ANDOPTION CODE TERMINAL MATERIAL RATING Q 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). LOW LEVEL/DRY CIRCUITB SILVER 2 POWER 0.4 VA MAX. @ 20 V AC or DC MAX. RoHS COMPLIANT* RoHS COMPATIBLE* YES YES YES YES GOLD 1 4 AMPS @ 125 V AC; or 2 AMPS @ 250 V AC; T65 (VDE).