PLX NICHICON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

CAT.8100H PLX Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +125°C 16 to 50V 22 to 390µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 125°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications listed at right, provided that its temperature profile is measured at both of terminal ends facing the soldering side. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value High reliability, High voltage (to 50V). Low ESR, High ripple current. Long life of 3000 hours at 125°C. Radial lead type: Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P L X V M 9 1 0 1 1 Capacitance tolerance (±20%) Rated capacitance (39µF) Rated voltage (35V) C L Size code Series name Type Configuration L+0.5MAX. 15MIN 4MIN φD±0.5 Resin coated Case φd L X 3 9 V 0 2 3 Capacitance Series Lot. No. Voltage(V:35V) P±0.5 Dimensions Type numbering system (Example : 35V 39 µF) Radial Lead Type, Long Life Assurance Dimension table in next page. Voltage V 16 20 25 35 50 Code C D E V H Size φD L P φd φ10 × 13L 10.0 12.5 5.0 0.6 φ8 × 9L 8.0 8.5 3.5 0.6 φ8 × 12L 8.0 11.5 3.5 0.6 (mm) CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Please refer to page 20 about the end seal configuration. PLX Higher Temperature PLV Frequency coefficient of rated ripple current

0 Frequency0/

120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLX Rated ripple current (mArms) at 105°C 100kHz Dimensions Rated Voltage (V)(code) Surge Voltage (V) 810 930 1130 800 910 1110 780 890 1080 720 830 1040 700 810 1020 2100 2400 2900 2000 2300 2800 2000 2300 2800 1800 2100 2700 1800 2000 2600 480 704 1248 480 600 1080 410 600 900 273 392 700 220 270 470 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 8 ×9 8 ×12 10 × 13 8 ×9 8 ×12 10 × 13 8 ×9 8 ×12 10 × 13 8 × 9 8 ×12 10 × 13 8 ×9 8 ×12 10 × 13 150 220 390 120 150 270 120 180 100 18.4 23.0 28.7 40.2 57.5 (1C) (1D) (1E) (1V) (1H) PLX1C151MCL1 PLX1C221MDL1 PLX1C391MDL1 PLX1D121MCL1 PLX1D151MDL1 PLX1D271MDL1 PLX1E820MCL1 PLX1E121MDL1 PLX1E181MDL1 PLX1V390MCL1 PLX1V560MDL1 PLX1V101MDL1 PLX1H220MCL1 PLX1H270MDL1 PLX1H470MDL1 ESR (mΩ ) (at 100kHz 20°C) Rated Ripple (mArms)Rated Capacitance (µF) Case Size φD × L (mm) tan δ Part NumberLeakage Current (µA) Ambient temperature of a capacitor Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.