PLTR2-16MM-PR2 BIVAR | Alldatasheet
Document overview
- Manufacturer or author: kbaron
- PDF pages: 1
Technical content
0.05 0.030.130in+ 0.002 0.001 3.30mm+ 0.276in 7.0mm REF 2:1 C CUSTOMER USE DRAWING (UNLESS OTHERWISE SPECIFIED) TD. NGUYEN TEL: (949) 951-8808 FAX: (949) 951-3974 CAGE CODE:SHEET SIZE SCALE: 04/04/17 DATE:DESIGNED: A. VALDEZ PLTR2-XXX-PRX K. BARON 07/20/20 TITLE: 07/20/20 4 THOMAS, IRVINE, CA. 92618 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING SHEET # OF REVISION: A DRAWING NO: DATE:CHECKED: DATE:REVISED: X° ± 1° .XXX ± .005 Light Pipe, 3.5mm, IP67 32559 .XX ± .01 .X ± .1 STANDARD TOLERANCE ANGULARDECIMALS CLEAR PC, 94V-0 PANEL, REF LIGHT PIPE WASHER, WHITE NYLON, 94V-0 L 3.5mm 0.25in 6.4mm 0.138in 0.030in 0.8mm SEAL POLYURETHANE, 94V-0 NUT, M3 X 0.50, WHITE NYLON, 94V-0 TABLE B (SEAL) COLOR CODE BLACK 1 WHITE 2 NOTES: ALL ITEMS SHIPPED NON-ASSEMBLED.1. SEALED TO IP67 RATING.2. ASSEMBLY INSTRUCTIONS: 3. - CUT RECOMMENDED MOUNTING HOLE INTO PANEL - INSERT SEAL ONTO LIGHT PIPE AND PLACE INTO MOUNTING HOLE - PLACE WASHER ON OTHER SIDE OF PANEL - PLACE FLAT SIDE OF NUT AGAINST WASHER AND TIGHTEN UNTIL THERE IS RESISTANCE - HOLD HEAD OF LIGHT PIPE AND TIGHTEN NUT WITH TORQUE WRENCH 6-7 IN-OZ - DO NOT OVERTIGHTEN OR APPLY FORCE TO LIGHT PIPE TABLE C (DYE) COLOR CODE BLUE BE BLACK BK GREEN GN GRAY GY RED RD YELLOW YW NONE BLANK TABLE A PART No. L = BODY LENGTH PLTR2-250-PRX 0.250 (6.4mm) PLTR2-500-PRX 0.500 (12.7mm) PLTR2-1000-PRX 1.000 (25.4mm) PLTR2-1500-PRX 1.500 (38.1mm) PLTR2-2000-PRX 2.000 (50.8mm) PLTR2-2500-PRX 2.500 (63.5mm) PLTR2-3000-PRX 3.000 (76.2mm) PLTR2-8MM-PRX 8mm (0.315") PLTR2-16MM-PRX 16mm (0.630") PLTR2-24MM-PRX 24mm (0.945") PLTR2-32MM-PRX 32mm (1.260") PLTR2-40MM-PRX 40mm (1.575") PLTR2-48MM-PRX 48mm (1.890") PLTR2-56MM-PRX 56mm (2.205") PLTR2-64MM-PRX 64mm (2.520") PLTR2-72MM-PRX 72mm (2.835") REVISIONS REV. DESCRIPTION DATE APPROVED B Engineering Release 4/04/2017 J.C. C Updated Assembly Instructions 7/20/2020 A.V. NOTES: ALL ITEMS SHIPPED NON-ASSEMBLED.1. SEALED TO IP67 RATING.2. ASSEMBLY INSTRUCTIONS: 3. - CUT RECOMMENDED MOUNTING HOLE INTO PANEL - INSERT SEAL ONTO LIGHT PIPE AND PLACE INTO MOUNTING HOLE - PLACE WASHER ON OTHER SIDE OF PANEL - PLACE FLAT SIDE OF NUT AGAINST WASHER AND TIGHTEN UNTIL THERE IS RESISTANCE - HOLD HEAD OF LIGHT PIPE AND TIGHTEN NUT WITH TORQUE WRENCH 6-7 IN-OZ - DO NOT OVERTIGHTEN OR APPLY FORCE TO LIGHT PIPE SEAL COLOR, TABLE B PLTR2-XXX-PRX XX PART NUMBER CONFIGURATION TABLE AL = BODY LENGTH, LIGHT PIPE DYED COLOR, TABLE C RECOMMENDED MOUNTING HOLE PANEL THICKNESS: 0.047" - 0.093"