PLT64/50/5-3C90

E64-10-50 FERYSTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Supersedes data of February 2002 2004 Sep 01 FERROXCUBE E64/10/50 Planar E cores and accessories

2004 Sep 01 2

Planar E cores and accessories E64/10/50 CORES Effective core parameters of a set of E cores SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.156 mm −1 Ve effective volume 40700 mm 3 Ie effective length 79.9 mm Ae effective area 519 mm 2 Amin minimum area 519 mm 2 m mass of core half ≈ 100 g handbook, halfpage CBW415 64.0 ±1.3 53.8 ±1.1 5.1 ±0.13 50.8 ±1 10.2 ±0.13 R0.25 max. typ. 10.2 ±0.2 Fig.1 E64/10/50. Dimensions in mm. Effective core parameters of an E/PLT combination Ordering information for plates SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.136 mm −1 Ve effective volume 35500 mm 3 Ie effective length 69.7 mm Ae effective area 519 mm 2 Amin minimum area 519 mm 2 m mass of plate ≈ 78 g GRADE TYPE NUMBER 3C90 PLT64/50/5-3C90 3C92 PLT64/50/5-3C92 3C93 PLT64/50/5-3C93 3C94 PLT64/50/5-3C94 3F3 PLT64/50/5-3F3 3F4 PLT64/50/5-3F4 handbook, halfpage CBW416 63.8 ±1.3 50.3 ±1 5.08 ±0.13 R0.64 ref. typ. Fig.2 PLT 64/50/5. Dimensions in mm.

2004 Sep 01 3

Planar E cores and accessories E64/10/50 Core halves for use in combination with an E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 100±30 N, unless stated otherwise. Note 1. Measured in combination with an equal-gapped core half, clamping force for AL measurements, 100±30 N. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 630 ±3% (1) ≈ 78 ≈ 1100 E64/10/50-3C90-E630-E 1000 ±3% (1) ≈ 124 ≈ 660 E64/10/50-3C90-E1000-E 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3C90-A1600-E 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3C90-A2500-E 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3C90-A3150-E 14640 ±25% ≈ 1820 ≈ 0 E64/10/50-3C90 3C92 11200 ±25% ≈ 1390 ≈ 0 E64/10/50-3C92 3C93 13300 ±25% ≈ 1650 ≈ 0 E64/10/50-3C93 3C94 630 ±3% (1) ≈ 78 ≈ 1100 E64/10/50-3C94-E630-E 1000 ±3% (1) ≈ 124 ≈ 660 E64/10/50-3C94-E1000-E 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3C94-A1600-E 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3C94-A2500-E 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3C94-A3150-E 14640 ±25% ≈ 1820 ≈ 0 E64/10/50-3C94 3F3 630 ±3% (1) ≈ 78 ≈ 1100 E64/10/50-3F3-E630-E 1000 ±3% (1) ≈ 124 ≈ 660 E64/10/50-3F3-E1000-E 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3F3-A1600-E 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3F3-A2500-E 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3F3-A3150-E 13300 ±25% ≈ 1650 ≈ 0 E64/10/50-3F3 3F4 630 ±3% (1) ≈ 78 ≈ 1100 E64/10/50-3F4-E630-E 1000 ±3% (1) ≈ 124 ≈ 660 E64/10/50-3F4-E1000-E 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3F4-A1600-E 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3F4-A2500-E 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3F4-A3150-E 6960 ±25% ≈ 860 ≈ 0 E64/10/50-3F4

2004 Sep 01 4

Planar E cores and accessories E64/10/50 Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 100±30 N. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 630 ±3% ≈ 78 ≈ 1100 E64/10/50-3C90-A-630-P 1000 ±3% ≈ 124 ≈ 660 E64/10/50-3C90-A-1000-P 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3C90-A-1600-P 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3C90-A-2500-P 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3C90-A-3150-P 16540 ±25% ≈ 1790 ≈ 0 E64/10/50-3C90 3C92 12700 ±25% ≈ 1370 ≈ 0 E64/10/50-3C92 3C93 15050 ±25% ≈ 1630 ≈ 0 E64/10/50-3C93 3C94 630 ±3% ≈ 78 ≈ 1100 E64/10/50-3C94-A-630-P 1000 ±3% ≈ 124 ≈ 660 E64/10/50-3C94-A-1000-P 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3C94-A-1600-P 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3C94-A-2500-P 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3C94-A-3150-P 16540 ±25% ≈ 1790 ≈ 0 E64/10/50-3C94 3F3 630 ±3% ≈ 78 ≈ 1100 E64/10/50-3F3-A-630-P 1000 ±3% ≈ 124 ≈ 660 E64/10/50-3F3-A-1000-P 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3F3-A-1600-P 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3F3-A-2500-P 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3F3-A-3150-P 15050 ±25% ≈ 1630 ≈ 0 E64/10/50-3F3 3F4 630 ±3% ≈ 78 ≈ 1100 E64/10/50-3F4-A-630-P 1000 ±3% ≈ 124 ≈ 660 E64/10/50-3F4-A-1000-P 1600 ±5% ≈ 199 ≈ 385 E64/10/50-3F4-A-1600-P 2500 ±10% ≈ 310 ≈ 225 E64/10/50-3F4-A-2500-P 3150 ±10% ≈ 391 ≈ 170 E64/10/50-3F4-A-3150-P 7920 ±25% ≈ 860 ≈ 0 E64/10/50-3F4

2004 Sep 01 5

Planar E cores and accessories E64/10/50 Properties of core sets under power conditions Properties of core sets under power conditions (continued) GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f=1 0 0k H z ; = 100 mT; T=1 0 0 °C f = 100 kHz; =2 0 0m T ; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C E+E64-3C92 ≥370 ≤ 3.6 ≤ 25 − E+PLT64-3C92 ≥370 ≤ 3.2 ≤ 23 − 1. Measured at 140 °C. ≤ 25(1) − E+E64-3C94 ≥320 ≤ 3.6 ≤ 25 − E+PLT64-3C94 ≥320 ≤ 3.2 ≤ 23 − E+E64-3F4 ≥250 −−− E+PLT64-3F4 ≥250 −−− GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 500 kHz; =5 0m T ; T = 100 °C f=5 0 0k H z ; = 100 mT; T=1 0 0 °C f=1M H z ; =3 0m T ; T=1 0 0 °C f=3M H z ; =1 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ

2004 Sep 01 6

Planar E cores and accessories E64/10/50 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.