PLS NICHICON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

CAT.8100H PLS Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +105°C 2.5 to 16V 100 to 1500µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications listed at right, provided that its temperature profile is measured at both of terminal ends facing the soldering side. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Ultra-low ESR, High ripple current. Load life of 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P L S A M D O Configuration Size code Capacitance tolerance (±20%) Rated capacitance (270µF) Rated voltage (10V) Series name Type L+0.5MAX. 15MIN 4MIN φD±0.5 Resin coated Case φd L S 2 7 0 A 9 4 1 Capacitance Series Lot. No. Voltage(A:10V) P±0.5 Dimensions Type numbering system (Example : 10V 270 µF) Radial Lead Type, Long Life Assurance Dimension table in next page. Please refer to page 20 about the end seal configuration. Voltage V 2.5 4 6.3 10 16 Code e g j A C Size φD L P φd φ8 × 9L 8.0 8.5 3.5 0.6 φ8 × 12L 8.0 11.5 3.5 0.6 φ8 × 7L 8.0 6.5 3.5 0.6 φ6.3 × 9L 6.3 8.5 2.5 0.6 φ6.3 × 10.5L 6.3 10.0 2.5 0.5 φ10 × 13L 10.0 12.5 5.0 0.6 (mm) PLS Long Life PLF CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Frequency coefficient of rated ripple current

0 Frequency0/

120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLS Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Rated ripple current (mArms) at 105°C 100kHz Dimensions 2.5 (0E) (1C) (1A) 6.3 (0J) (0G) 2.8 18.4 11.5 7.2 4.6 330 680 820 820 820 1500 270 560 560 680 1200 330 390 470 560 560 820 150 270 470 100 270 330 470 500 340 500 410 410 750 500 448 448 544 960 416 491 592 706 706 1033 300 540 940 320 864 1056 1504 4800 3900 4800 5200 5800 5500 4800 3900 5200 5800 5500 3000 3900 5500 4300 5000 5500 3000 4900 5500 2800 4500 4700 4700 PLS0E331MCO8 PLS0E681MCL 2 PLS0E821MCO8 PLS0E821MCO6 PLS0E821MDO1 PLS0E152MDO1 PLS0G271MCO8 PLS0G561MCL 2 PLS0G561MCO6 PLS0G681MDO1 PLS0G122MDO1 PLS0J331MDL4 PLS0J391MCL2 PLS0J471MDO 1 PLS0J561MCO 8 PLS0J561MCO 6 PLS0J821MDO 1 PLS1A151MDL4 PLS1A271MDO1 PLS1A471MDO1 PLS1C101MDL4 PLS1C271MDO1 PLS1C331MDO1 PLS1C471MDO1 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 6.3 × 9 8 × 7 6.3 × 9 8 × 9 8 × 12 10 × 13 6.3 × 9 8 × 7 8 × 9 8 × 12 10 × 13 6.3 × 10.5 8 × 7 8 × 12 6.3 × 9 8 × 9 10 × 13 6.3 × 10.5 8 × 12 10 × 13 6.3 × 10.5 8 × 12 10 × 13 10 × 13 Rated Capacitance (µF) Rated Voltage (V) code Surge Voltage (V) Leakage Current (µA) ESR (mΩ) (at 100kHz 20°C) Rated Ripple (mArms)tan δ Part NumberCase Size φD × L (mm) No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 8 will be put at 12th digit of type numbering system.